Priedėlis (28411)

Henning

Sąlyga: naudotas, Gamybos metai: 1987, Didžiausias eigos ilgis 1300 mm Didžiausias griovelio plotis C45/GG 20/26 mm Tempiamoji jėga - maks. 3 t Stalo dydis 500 x 220 mm Nedpjx Ny Aqofx Af Iscl Pjovimo greitis 2 / 4 m/min Grįžimo greitis 3 m/min Pavaros galia 3 kW Darbinė įtampa 400 V Bendras energijos poreikis 3 kW Staklių svoris apie 385 t Užimamas plotas apie 0,5 x 1,0 x 1,50 m Gamyklos Nr.: 17136 Eigos aukštis gali būti laisvai nustatomas.

Sąlyga: geras (naudotas), Gamybos metai: 2020, mašinos/transporto priemonės numeris: 164390-0000-Z2724, Offer 24059 Technical Data: - Jaw Type: Step jaws - Jaw Width: 125 mm - Jaw Height: 40 mm - Clamping Range 1: 0 – 216 mm - Clamping Range 2: 97 – 312 mm - Clamping Force: 40 kN - Overall Height: 140 mm - Weight: 33 kg - Minimum Required Space: L 463 x W 126 x H 145 mm Nodpfx Aferwmkao Iocl

Sąlyga: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17065, Manufacturer: Henning Ncodpfx Asup Uzfef Iol Model: U6/1000 Machine No.: 17065 Year of Manufacture: 1979 Weight: 1,100 kg General / Technical Data: Used mechanical vertical broaching machine Henning, in operational condition Pulling force: 6,000 kg (60 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 600 x 460 mm / 480 x 340 mm Table opening: Ø 170 mm with eccentric table insert with Ø 90 mm hole for standard broaching mandrels (Rausch system) Workpiece diameter: unlimited Dimensions (H x W x D): 1,650 mm x 1,200 mm x 700 mm (H = table height from floor without superstructure) Motor: 7.4 / 10 kW Power supply: 380 Volt / 50 Hz Accessories / Special Features: - Integrated coolant system - Return circuit with dual-operation mode - Machine documentation - Automatic jaw opener in the lower pull bridge position (tool removal) - Tool clamping with universal jaws for flat shanks according to DIN 1416 BL 6 Remarks: The machine is in its original condition, functionally tested. The machine is mechanically driven via a trapezoidal-thread spindle and a geared motor. Unlike most mechanically driven broaching machines where the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. This ensures extra column guidance and very robust construction. The dual-spindle drive is ideal for continuously consistent cutting speeds, even at higher pulling forces. The machine is stored at our warehouse and can be inspected under power.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Nsdpfxswlvlgo Af Iscl Swing Diameter Over Cross Slide: 800 mm Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Sąlyga: naudotas, Gamybos metai: 2001, Tekinimo ilgis 470 mm Maks. tekinimo skersmuo 390 mm Veleno apsisukimai 3500 aps./min. Judėjimai X/Z – 235/520 mm Stotelių skaičius revolverinėje galvoje 12 vnt. Nsdpfxexdfi Nj Af Ijcl Valdymas: MSG 500 Priedai: Įvairūs įrankių laikikliai

Gamybos metai: 1983, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Ncedpfx Ajd Nb A Nef Isl Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.

Sąlyga: naudotas, Gamybos metai: 2007, Swing diameter: 300 mm Turning length: 600 mm Control: FANUC 18i-TB Swing diameter over cross-slide: 230 mm Travel X1: 165 mm Travel Z1: 700 mm Travel X2: 190 mm Travel Z2: 720 mm Travel Y: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle motor: 22 kW Nsdpfx Afsxn Amts Iocl Spindle torque: 208 Nm Sub-spindle bore: 76 mm Sub-spindle speed: 5,000 rpm Sub-spindle motor: 22 kW Spindle torque: 208 Nm Turret: 2 x 12 stations Number of driven tool stations: 2 x 12 Driven tool speed: 5,000 rpm Torque (driven tools): 47 Nm Driven tool motor: 5.5 kW C-axis resolution: 0.001° Rapid traverse (X + Z axes): 20 / 40 m/min Rapid traverse (Y axis): 7.5 m/min Total power requirement: 68.4 kVA Machine weight approx.: 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA, BB208, 210 mm dia., on sub-spindle, various tool holders for turret, short bar loader, HYDRAFEED type MULTIFEED MX-1B for bar diameter 3 – 80 mm and bar length up to 1650 mm; chip conveyor, coolant system with belt filter unit

Sąlyga: naudotas, Gamybos metai: 2012, X eiga: 1 035 mm Y eiga: 560 mm Z eiga: 510 mm CNC valdiklis: HEIDENHAIN TNC620 Stalo dydis: 1 200 x 560 mm Maks. stalo apkrova: 1 000 kg Veleno tvirtinimas: SK 40 Veleno apsisukimai: 10 000 aps./min Veleno variklio galia: 13 kW Bepakopis padavimas: 20 000 mm/min Ncjdjw A Spvjpfx Af Iol Greita eiga: 25 m/min Įrankių keitiklis: 20 pozicijų Aušinimo sistema: vidinis aušinimas 20 bar Darbinė įtampa: 400 V Bendras galios poreikis: 17 kVA Staklių svoris: apie 4,1 t Užimama vieta: apie 2,55 x 2,30 x 2,25 m Drožlių transporterio matmenys: 3,90 x 0,95 x 1,60 m - Gamyklos Nr.: 1539000377A - Mašinos veikimo laikas: 21 689 h - Veleno veikimo laikas: 9 021 h - Valdymas: Heidenhain TNC 620 - Elektrinis rankenėlė - Drožlių transporteris - Vidaus aušinimas 20 bar

Sąlyga: geras (naudotas), Gamybos metai: 1989, veikimo valandos: 64 136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bedway cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal and face: 0.5 – 5000 mm/min Rapid traverse longitudinal + face: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC hand-input control with program input via function and numeric keypad. All information is entered interactively via screen dialogue. Integrated menu technology and plain-text display of all functions. Operating keypad, screen, and handwheel are housed in a separate chip protection panel. The EPL control provides the following capabilities: Programs can be entered and modified directly by the operator via the EPL control without prior manual programming preparation. NC programs according to ISO/EIA standard can be entered or output via the RS 232 serial interface, or entered manually. Machining cycles: Roughing cycles for longitudinal, facing, and contour turning, including allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, including programmable grinding allowance. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii 90° and chamfers 45°. Automatic tool nose radius compensation for cycles, undercuts, grooves, radii, chamfers. Programming: Block-oriented, metric/inch, diameter in absolute input mode, radius in incremental input, full-circle programming, subroutine technique, skip levels for program sections. Workpiece zero offset. Mode selection via menu. Program input and output: Interactive via menu with operator guidance or directly in dialogue • Hydraulic 3-jaw chuck, Ø 315 mm, with through-spindle bore Ø 80 mm • Hinged chip conveyor • 12-station VDI 40 turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 miscellaneous standard tool holders (details to be discussed on site) Njdpfxsvr Eh Es Af Iscl Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: naujas, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machines category, distinguished by its robust construction and long, supported guideways. Its heavy machine bed made of high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate accurate infeed. This setup is complemented by a standard position indicator with linear scales, allowing for straightforward monitoring of actual values. The machine’s versatility for internal and external cylindrical grinding, as well as taper grinding, is further enhanced by the hydraulically adjustable workhead. Buyers receive a comprehensive set of standard accessories, including an internal grinding attachment and a work lamp. Experience superior performance and precision with the RSM 500 A – request a quote now to optimize your grinding projects! Ncedpjncdx Njfx Af Iel