Kraštų klijavimo staklės F4 - HEBROCK

HEBROCK F4

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Edgebanding Machine Hebrock F 4 with Jointing, Corner Copying, and Two Scrapers. Very well-maintained machine from a small business, in excellent condition. Color touch-screen interface with PLC control for easy operation of the machine, allowing storage of 10 operating programs. Edge thickness roll: approx. 0.4 – 2 mm Workpiece height: approx. 10 – 40 mm Feed rate: approx. 7 m/min Noise protection hood Extendable workpiece support Extraction connection: 1 x 140 mm Dedpfjw Sn I Ejx Admocn Units: Top pressure, manual adjustment with SIKO counter Infeed fence, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Jointing with diamond cutters, cutters resharpened Gluing unit with automatic edge feed for roll material up to 2 mm Glue pot with quick color change device Pressure zone with 3 rollers Cut-off saw Combination milling unit, R2, with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Corner rounding unit R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf programs; i.e., only the straight edge is rounded, not the corners Glue joint scraper, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent on request. All reversible knives of the milling units and scrapers have been replaced or rotated, saws have been resharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork damage has been repaired. The machine has approx. 335 operating hours and has processed approx. 20,700 linear meters of edge material. The machine is in very good condition, see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "further offers from this seller."

Sąlyga: geras (naudotas), Gamybos metai: 2025, • Additional changeover glue pot • PLC control system (incl. touchscreen) • Hotmelt glue application onto the workpiece up to 3 mm jointing cutter • Jointing cutter (incl. DIA tool) up to 2 mm cutting depth • Maintenance-free glue pot with quick-change preparation, including glue discharge device • High-frequency crosscut saw station (approx. 12,000 rpm) • High-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter heads (combination version) • Corner rounding unit • Surface scraper (incl. pneumatic lift) • Free space (for cleaning station or radius scraper) • Robust chain drive • Ball-bearing double-roller top pressure • Viewing window from the rear of the machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock radius scraper F4/09 (incl. pneumatic lift) Dcjdpfxjxgfpzj Admen • Hebrock pneumatic 3-point adjustment (for radius, bevel, and flush milling) Available from: immediately Delivery terms: EXW Berlin Payment terms: Payment before collection Accessories without guarantee. Applies: “Object sold as seen.” Prospective buyers must inspect the completeness of the item on site.

Sąlyga: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Dcedpjhqadcjfx Admen Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Corner milling unit Accessories: F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. total connected load: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm Dcjdpfx Adoglfwtomon Edge banding machine with PLC control Joint milling unit (incl. DIA tool) up to 2 mm milling depth Combination milling head Radius miller R=2 mm Radius corner miller R=2 mm Radius scraper blade R=2 mm

Sąlyga: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 1271, Maks. briaunos storis: 2 mm Min. ruošinio storis: 10 mm Maks. ruošinio storis: 40 mm Min. ruošinio ilgis: 180 mm Padavimo greitis: 7 m/min Įšilimo laikas: 4 min Jungimo agregatas: Taip, su 2 frezavimo agregatais Jungimo įrankis: Deimantinis keičiamų plokštelių freza Įėjimo liniuotės reguliavimas: rankinis Nukirptuvė iki: 2 mm Briaunos padavimas pavieniui: įmanoma Klijavimas: kontaktinis klijavimo volelis Klijų talpa: keičiama su išleidimo kanalu PU klijavimas: įmanoma Pjūklelis: Taip Kombinuotas agregatas lygiavimas/fazavimas/radiusas: pneumatiškai reguliuojamas Kampų apvalinimo agregatas: pneumatiškai reguliuojamas Plokščioji grandymo geležtė: Taip, jautri Agregatų rodymas: ekrane Valdymo tipas: PLC valdymas Dodpfjvniu Uox Admjcn Valdymas: jutiklinis ekranas Variklio galia: 7,4 kW Važiuoklė: Ne Ištraukiamas ritininis stalas: Taip Apsauginis gaubtas: Taip Svoris apie: 750 kg Ištraukimo skersmuo: 140 mm Darbinis metražas apie: 7 900 m

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, reikalingas aukštis: 1 200 mm, Edge bander equipped with: - Trimmers - Edging tape magazine - Interchangeable hotmelt EVA or PUR glue pot Djdpfx Aswy Ugxedmecn - Flush trimming - Corner rounding units

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Hebrock edge banding machine, model: F 4 Year of manufacture: 2024 Serial no. F 4371 / Including special equipment: - Quick-change device for corner rounding unit, No. F4/08/4 - Additional exchange motor for corner rounding unit, No. F4/08/5 - Radius scraper (pneumatic lift), No. F4/9 - Multi-radius scraper (R2/1), No. F4/09/4 - Spray device for release agent, No. F4/24/1 - Pneumatic 3-point adjustment, No. F4/30 - Jointing up to 50 mm workpiece thickness, No. F4/31 Djdpsvkv Elsfx Admscn Commissioning of the machine on site can be carried out by Hebrock (factory instruction). Cost: €798 + VAT List price of the machine incl. equipment: €49,110 excl. VAT Machine available immediately

Sąlyga: naujas, Edge thickness: up to 3 mm Total length: 4122 mm Feed speed: 10 m/min with PLC control (including touchscreen) and hot melt glue monitoring at the workpiece for edge material up to 3 mm Jointing cutter (including DIA tooling) up to 2 mm milling depth1), maintenance-free glue pot with quick-change feature chip/scrap removal unit, HF (high-frequency) cut-off saw station (approx. 12,000 rpm), HF (high-frequency) milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination design), corner rounding milling unit, surface scraper (including pneumatic lift), spare station (for cleaning unit or radius scraper), robust chain drive, double roller top pressure with ball bearings, inspection window at rear of machine, extendable workpiece support, approx. 10 m/min feed. Item No. F4/00/11 - Jointing Head Whispercut F4/500/10 - Combination Milling Head F4/500/20 - Radius Milling Head R=2mm F4/500/2 - Radius Corner Milling Head R=2mm F4/08/2 - Quick-change Corner Milling Unit F4/08/4 - Radius Scraper (incl. pneumatic lift) F4/09 - Radius Scraper R=2mm F4/09/2 - Chassis F4/10 Dcodpfx Ajvwd Uuedmen - Pneumatic 3-point adjustment (for radius, chamfer, flush milling) F4/30