Miltelių gamykla

Handelsagentur Klaus Benecke Einsteigerpakte Pulverbeschichtung

Sąlyga: labai geros būklės (naudotas), Knuth UFM 2 universalioji frezavimo staklė Techniniai duomenys X ašies eiga (rankinė) 800 mm X ašies eiga 750 mm Y ašies eiga 300 mm Z ašies eiga 400 mm Stalo dydis 1320x320 mm T formos grioveliai 5x14x63 mm Pavaros Y ašies eiga (8) 20 - 360 mm/min Bledonfu Riopfx Aahjd Z ašies eiga 600 mm/min Veleno apsukos (12) 58 - 1800 min-1 Vertikalaus veleno konusas SK 40 Atstumas tarp veleno galo ir stalo 0 - 400 mm Galvos pasukimas 45° Horizontalaus veleno konusas SK 50 Pavaros Pagrindinio variklio galia 4 kW Z ašies variklio galia 0,75 kW Pavaros variklio galia 0,55 kW Aušinimo siurblio variklis 0,09 kW Aušinimo skysčio siurblio našumas 25 l/min Matmenys ir svoris Matmenys 1900x1720x1750 mm Svoris 2100 kg Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Bjded Ixadepfx Aaheld Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 19 853 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11170000963, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, 5-axis simultaneous Speed: 18,000 rpm Tool changer for 60 tools / SK 40 DIN69871 Tools included in the price Blsdpfx Ajwqp Husahod ICS (internal coolant supply) / air blast Heidenhain 426/430

Sąlyga: geras (naudotas), Gamybos metai: 1985, Megamat Vertical Carousel Model: 130-225-42 Device no.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Blsdpfx Aaevc Hk Nehod Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Shelf load capacity: 100 kg Total load capacity: 4,200 kg Colour: beige/green

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left Bsdpfod N H A Nex Aaheld - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit that moves in the longitudinal (X-axis) direction, with an adjustment range of 0 - 15,000 mm. It is equipped with an automatic tool changer using an HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: - Profiled and flat steel support with guide rail and fixed table, total length: 15 m - Mobile drill unit for longitudinal positioning on workpieces - Horizontal drill head with a single drilling spindle - Additional drill head storage in X-axis direction Bjdpfx Aaov Iamzoheld - Clamping system for securely fixing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drilling spindles: 1 - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Spindle speed: 180 - 3000 rpm - Holder: HSK A 80 - Tool changer: 1 x 6 For more information, please contact us.

Sąlyga: geras (naudotas), Automatic drawer storage systems are the ideal solution for vertical storage of steel bars and profiles with lengths of 3 m, 6 m, and 12 m, heavy accessories, semi-finished products, components, molds, and long materials in general. The load capacity per storage unit ranges from a minimum of 5,000 kg up to a maximum of 6,000 kg. Bodpsvvlntsfx Aahold

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Blsdsfz U S Ejpfx Aahjd - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, X ašies eiga: 1 524 mm, Y ašies eiga: 660 mm, Z ašies eigos atstumas: 610 mm, įrankių magazino lizdų skaičius: 40, valdiklių gamintojas: Hurco, bendras aukštis: 3 298 mm, bendras ilgis: 5 662 mm, bendras plotis: 3 921 mm, bendras svoris: 10 900 kg, stalo ilgis: 1 676 mm, stalo plotis: 660 mm, valdiklio modelis: MAX5, sukimo momentas: 118 Nm, atstumas nuo stalo centro iki veleno galo: 622 mm, ašies variklio galia: 36 500 W, ašies skaičius: 1, greitasis eiga Z ašyje: 2 m/min, greitas poslinkis X ašimi: 3 m/min, greitas poslinkis Y ašis: 3 m/min, sukamosios stalo skersmuo: 600 mm, sukimosi greitis (maks.): 100 aps./min, veleno nosis: BT40, veleno greitis (maks.): 12 000 aps./min, stalo apkrova: 1 360 kg, įrankio skersmuo: 75 mm, įrankio ilgis: 249 mm, įrankio svoris: 7 g, Įranga: CE žymėjimas, drožlių transporteris, 🔹 Zu Verkaufen: Hurco VMX60SRTi 5-Achs-CNC-Bearbeitungszentrum Bj. 2016 – Hervorragender Zustand 🔹 Hersteller: Hurco Modell: VMX60SRTi Baujahr: 2016 Maschinentyp: 5-Achs-CNC-Bearbeitungszentrum Zustand: Hervorragend Steuerung: Hurco WinMax mit Touchscreen Standort: Irland 📌 Maschinenübersicht: Zum Verkauf steht ein Hurco VMX60SRTi 5-Achs-CNC-Bearbeitungszentrum in ausgezeichnetem Zustand, ausgestattet mit leistungsstarken Features und der flexiblen Schwenkkopf- sowie Drehtisch-Konfiguration von Hurco. Das Modell von 2016 bietet außergewöhnliche Zugänglichkeit der Werkstücke, eine kraftvolle Fräsleistung sowie leistungsfähige Software für anspruchsvolle 5-Achs-Bearbeitung. Die großzügige Tischfläche ermöglicht sowohl echte 5-Achs- als auch konventionelle 3-Achs-Bearbeitung und damit maximale Flexibilität für Werkzeugbau, Formenbau, Luft- und Raumfahrt sowie allgemeine Präzisionstechnik. ✅ Hauptmerkmale & Inklusive Optionen: Touchscreen-Display mit schattierten 3D-Grafiken (Echtzeit) 2 GB RAM | 120 GB SSD | USB-Schnittstellen Ultimotion Hochgeschwindigkeits-Software (Profilierung & Datenglättung) S-Kurven-Beschleunigung & Look-Ahead-Finish-Steuerung Kühlmittel durch die Spindel (CTS) NC4 Laser-Werkzeugvermessung Renishaw RMP60 Werkstückmesstaster Zusätzliche Software: Mould Maker Suite (3D Freiformflächen, Helix-Eintritt, Restmaterialbearbeitung) DXF-Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Netzwerk/Remote-Diagnose) Dialog-/NC-Merge Schwenkbare B-Achse & C-Achsen-Drehtisch Flexible Programmierung: Dialog oder G-Code 🔧 Technische Daten: Aufspannfläche: 1676 x 660 mm Drehtischdurchmesser: 600 mm Max. Tischbelastung (Flachtisch): 1.360 kg Max. Drehtischbelastung: 500 kg X-Verfahrweg: 1.524 mm Y-Verfahrweg: 660 mm Z-Verfahrweg: 610 mm B-Achse Schwenkbereich: ±92° C-Achse Rotation: 360° Spindel Nase-Tisch: 13–622 mm Spindeldrehzahl: 12.000 U/min Spindelaufnahme: BT40 Spindelleistung: 36,5 kW Spindelmoment: 118 Nm bei 2.900 U/min Werkzeugwechsler: 40 Plätze Max. Werkzeugdurchmesser: 75 mm Max. Werkzeuglänge: 249 mm Max. Werkzeuggewicht: 7 kg Eilgang (X/Y): 32 m/min | Z: 24 m/min Drehtischgeschwindigkeit: 100 U/min Anschlusswert: 70 kVA Maschinenabmessungen (LxB): 5.662 x 3.921 mm Höhe: 3.298 mm Maschinengewicht: 10.900 kg 📈 Ideal geeignet für: Luft- & Raumfahrt- sowie Verteidigungsteile Formenbau & Werkzeugbau Komplexe 3D-Flächenbearbeitung Mehrseitenbearbeitung in einer Aufspannung Hochpräzise Bauteilfertigung Hurco VMX60SRTi gebraucht kaufen 5-Achs-CNC-Bearbeitungszentrum Gebrauchte Hurco CNC-Maschine Hurco 5-Achs-CNC Irland CNC-Bearbeitungszentrum mit Rundtisch Blsdpfx Aouyt U Tjahsd

Gamybos metai: 2025, Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) 58 reviews ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programmes.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗⌛⏰►►► ✨✨Buy directly from the manufacturer for a price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technology. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Bsdpoghf R Usfx Aaheld ⭐ Powder curing oven with gas or diesel heating – BOXLINE 15-3025 ✔️Internal dimensions: 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️Volume: 9 m³ ✔️ Heating output: 90,300 Kcal/h ✔️ Recirculation air flow rate (fan): 6,800 [m³/h] ✔️ Power of recirculation fan: 2.2 [kW/h] ✔️ Digital temperature control. Infinitely adjustable up to 220°C ✔️ Sandwich panels inner: 1 mm galvanized steel, outer: 1 mm powder-coated steel ✔️ Adjustable air outlets and circulation channels for homogeneous air distribution ✔️ Curing temperature, curing time, and exhaust fan function can be set ✔️ Audible alarm at the end of curing cycle ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm mineral wool and 100 mm glass fibre) ✔️ Heating method: indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The powder cures (polymerizes) at approx. 200 ºC (depending on the coating type), forming a film on the metal surface. Temperature regulation in the oven is managed by a control unit receiving feedback from a temperature sensor inside the oven. ✳️Oven Body✳️ The polymerization oven body is constructed from thermal insulation panels, installed vertically and bonded with a heat-resistant sealant. Conveyor spacing to the oven door channels can be provided upon request. Optionally, the oven can be supplied with double swing doors. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. The construction and materials allow the chamber temperature to be increased to up to 230°C, while ensuring temperature differences within permissible limits. Heat exchangers made from 3 mm, AISI310 grade stainless steel. ✳️Recirculation Fan✳️ Air circulation within the oven is achieved by four recirculation fans with insulated housing. Blade air impellers are commonly used in the recirculation fans. ✳️Digital, fully electronic temperature controller✳️ ✳️Exhaust Fan✳️ The exhaust fan serves for extracting the gases produced during powder curing inside the oven. If required, the exhaust fan can operate continuously after a set period or switch on automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️