Aukšto slėgio siurblio įrenginys 300bar 24l/min

Hammelmann HDP 47

Gamybos metai: 2016, Sąlyga: beveik kaip naujas (naudotas), Farmet FE 500 extruder Lsdpom Rgm Refx Ad Tjai Dimensions: H: 1,362 mm x W: 1,390 mm x L: 1,960 mm Total power: 57 kW Weight: 2,000 kg (The photos show the extruder shaft; the housing is packed separately. The control cabinet is partially available.) Steam conditioner, as-new, made of stainless steel

Sąlyga: naudotas, Pressure: 3 – 6.5 kg/cm² (bar) Flow rate: 26 l/min Nozzle diameter min./max.: -- mm Ratio: 73:1 Rated power: 1.65 kW Machine weight: approx. 100 kg Lsdogvkliopfx Ad Toai Space requirement: approx. 730 x 760 x 1200 mm Sound level: 78 dB(A) - Low-noise design - High-pressure pump

Sąlyga: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 9 953 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 440 mm, bendras ilgis: 7 150 mm, bendras aukštis: 2 590 mm, slėgis: 1 000 juosta, darbinis slėgis: 1 000 juosta, kuras: dyzelinas, bendras svoris: 12 500 kg, sukimosi greitis (maks.): 1 700 aps./min, vandens talpos tūris: 1 600 l, tuščias svoris: 12 500 kg, galia: 480 kW (652,62 AG), vandens slėgis: 1 000 juosta, variklio darbinis tūris: 15 874 cm³, siurblio našumas: 193 l/min, Įranga: Tipinė plokštelė prieinama, sūkių greitis be galo kintamas, High-pressure pump unit Hammelmann HDP 362 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers/outlets, each with individually adjustable pressure settings installed. Laodpfx Adowz Ekqe Toi Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW with 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine with workshop and changing room. Dimensions (LxWxH): approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Gamybos metai: 1995, Sąlyga: labai geros būklės (naudotas), 2 vnt. Sulzer MB 80-230/3 išcentrinių siurblių Našumas: 79-89 m³/val. Pakėlimo aukštis: 240-230 m Maks. temperatūra: 130°C Lasdpfx Adsd Sybue Toi Sandarinimas: slankiojanti sandara su barjerinio vandens jungtimi Variklio galia: Siemens 90 kW Apsisukimai: 2980 aps./min ! Kaina už vienetą !

Sąlyga: geras (naudotas), Gamybos metai: 2024, Welding Turntable KT 300 Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Infinitely variable tilt range via crank gear motor: 0 – 90° Speed: 0.3 – 2.5 rpm Includes foot remote control Optional: Lasdpjbvk I Esfx Ad Tsi Quick-Change Chuck Diameter 300 mm, €450.-

Gamybos metai: 2005, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: A5.01077.0181, Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 77 Operating pressure: 650 bar Flow rate: 45 l/min Drive speed: 1500 rpm Drive power: 54 kW with SIEMENS electric motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,400x720x1,160 mm Weight: approx. 800 kg Year of manufacture: 2005 Lodpfx Aeix I Nded Teai Condition: In good used condition.

Gamybos metai: 1996, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112 on base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW Equipped with VEM motor 90 kW 3~motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 2300x1000x1400 mm Weight: approx. 1500 kg Lsdpehtnniofx Ad Tjai Year of manufacture: 1996 Condition: in good used condition.

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW Ljdoh A Sfdepfx Ad Toai 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: naujas, Delivery pressure: 13 bar Effective delivery rate: 690 L/min Tank capacity: 270 L / 16 bar Machine weight: approx. 199 kg Motor: 400V / 5.5 kW Lajdpjfgygxjfx Ad Tsi Dimensions (L x W x H): 1.7 x 0.6 x 1.27 m This is a high-pressure version (especially suitable for truck service or heavy-duty work). OPTION: The UWM 7.5/690/270 can be equipped with a starter unit (star-delta starter). Surcharge: €379.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo ilgis: 1 630 mm, tekėjimo skersmuo: 500 mm, veleno skylė: 62 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 45 aps./min, X ašies eiga: 430 mm, Y ašies eiga: 190 mm, Z ašies eigos atstumas: 1 474 mm, ašies variklio galia: 22 000 W, greitas poslinkis X ašimi: 25 m/min, greitas poslinkis Y ašis: 12 m/min, greitasis eiga Z ašyje: 20 m/min, bendras aukštis: 23 000 mm, bendras ilgis: 54 050 mm, bendras plotis: 28 880 mm, Įranga: dokumentacija / vadovas, Okuma MacTurn 30 - 1500 OSP U100L CNC-Steuerung Achszahl – 5 +2 Umlaufdurchmesser über Bett – Ø500 mm Umlaufdurchmesser über Schlitten – Ø500 mm Max. Drehdurchmesser – Ø500 mm Ljdpfx Asrdvhhod Teai Max. Drehlänge – 1474 mm Verfahrweg X-Achse oben – 430 mm Verfahrweg X-Achse unten – 140 mm Verfahrweg Z-Achse oben – 1474 mm Verfahrweg Z-Achse unten – 1305 mm Verfahrweg Y-Achse – 190 mm (+95/-95 mm) Verfahrweg W-Achse – 1305 mm C-Achse 360° (0,001°-Schritte) Eilgang: Obere X-Achse: 20.000 mm/min Untere X-Achse: 15.000 mm/min Obere Z-Achse: 25.000 mm/min Untere Z-Achse: 20.000 mm/min Y-Achse: 12.000 mm/min C-Achse: 200 min⁻¹ Spindelaufnahme – JIS A2-6 Hauptspindeldrehzahl – 45–4.500 min⁻¹ Gegenspindeldrehzahl – 45–4.500 min⁻¹ Hauptspindelleistung – 15 kW Gegenspindelleistung – 15 kW Hauptspindeldurchmesser – Ø100 mm Gegenspindeldurchmesser – Ø100 mm Hauptspindelbohrung – Ø62 mm Gegenspindelbohrung – Ø62 mm Werkzeugspindel Drehzahl – 6.000 min⁻¹ Werkzeugspindel Leistung – 6,8 kW ATC Magazin – BT40 Werkzeugplätze – 40 Max. Werkzeugdurchmesser – Ø110 mm Max. Werkzeuglänge – 300 mm Max. Werkzeuggewicht – 10 kg Späneförderer – Hoch Gewicht – 12.100 kg