"Hamba BK 8008 P" pildymo linija (2002 m.)

Hamba Abfülllinie

Sąlyga: naudotas, Gamybos metai: 1997, Overview The cup filling line was built by HAMBA in 1997, remains in operation until the end of 2024, and can be inspected at any time. Nodpet Uw E Dofx Af Iskt Technical Data Output: 20–40 cycles/min Products that can be filled: - Liquid yoghurt milk, 0.3 to 4% fat (20–45°C) - Stirred yoghurt with fruit, max. fruit piece size 15mm, 0.3 to 4% fat (3–10°C) - Cream, 25 to 35% fat (3–42°C) - Salad dressings with salt, herbs, and vinegar - Sweet pudding (2–70°C) Cup formats: - Cup diameter: 75 mm - Max. height: 120 mm Filling volumes: - Dispenser: 50 ccm to 250 ccm, with fruit dosing - Dispenser: 30 ccm to 150 ccm, with fruit dosing Sealing: Foil lids Control system: Siemens S7 Scope of supply: - Filling machine | HAMBA | BK 8008 A | 1997 - Cup denester | Schäfer und Flottmann | SFS 337 | 1997 - Empty cup conveyor | Manex | – | 1997 - Packer | AF | – | 1997 - Integrated into SIG HAMBA BK 8008 P line - Well maintained condition - Full cup conveyor | Manex | – | 1997 - Layer palletizer | Manex | – | 1997 (overhauled in 2004)

Sąlyga: naudotas, various types available Nksdpfxjdc A Sbo Af Ijt

Gamybos metai: 2014, Sąlyga: visiškai atnaujintas (naudotas), REEPAK REEFLOW 250 Nkjdpfjg Rcabsx Af Iet ID. nr. 2050 Reepak modell Reeflow 250 flowpack-maskin fra 2014, som tidligere har blitt brukt til pakking av epler, men som er egnet for all type matvarepakking m.m. Maksimal pakningsstørrelse: Lengde 600 mm x Bredde 250 mm x Høyde 100 mm. MERK: MASKINEN ER I NY TILSTAND! Maskinens dimensjoner: Lengde 570 cm x Bredde 145 cm x Høyde 205 cm.

Gamybos metai: 1990, Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 647-230, Hamba Die Cutting Machine without Tooling Type 647-230 Film Width: 230 mm Very good condition Made in Germany - Supplied with a used embossing calender for worm pattern - Power connection: 220/380V – three-phase Nedpfx Aenr Ex Tsf Iskt - Additional punching tools available – for example: 2x double punching tool – diameter 75.50 mm 1x double punching tool – diameter 59.54 mm 1x double punching tool – diameter 80.50 mm 1x double punching tool – diameter 93.80 x 120.90 mm

Sąlyga: geras (naudotas), 10,000 units of Insert Gratings / Wire Mesh Gratings for Pallet Racking, galvanized Insert gratings available in various sizes, mesh widths, load bars, and weight capacities: Negotiable price: from €15.00 net per m² ex stock. Larger quantities available on request! Specifications: Insert Grating Mesh Size Load Bar Load Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Nedpfxod Hvvgj Af Iekt Used goods in very good condition, see pictures. Goods are in stock. Transport available on request. Viewing possible anytime by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from various manufacturers in stock. (Subject to change and errors in technical data, details and prices, as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.) Purchase / Sale: We are continuously looking for and offering various items from different sectors Clean-swept company clearances Liquidations Fast - flexible - effective! We also clear and/or dispose for insolvency administrators. Simply contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo!

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Nksdpfx Astzdyzof Iot Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: beveik kaip naujas (naudotas), GASTI Dogatherm 41 cup filler. Manufacturer - Gasti-Verpackungmaschinen GmbH Model - Dogatherm 41. Buffer tank capacity - 100L. Nkodpjfddpvofx Af Iot Minimum fill volume - 25ml. Maximum fill volume - 280ml. Output - 4,500 to 8,000 cups per hour. Capable of filling the following products: milk, drinking cocoa, yoghurt, buttermilk, cream, sour cream, cottage cheese, pudding, fruit jelly, rice pudding, Nutella, jam, and more. Includes additional conveyor chain and a pallet with extra parts/spare parts. Additional filling head included. Diameter of additional cup chain - 70mm diameter. HAD.20.

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Nodpsvy Ihdefx Af Iskt Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: geras (naudotas), Selten verfügbar: Toyo Jidoki Schlauchbeutelmaschine direkt vom kürzlich stillgelegten Hersteller von Saucen, Fonds und Suppen. Diente zum Abfüllen dieser Produkte in stehende, retortierbare Beutel. Baujahr 2007, Erstkauf neu. Nedpoqudivjfx Af Iokt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, bendras svoris: 35 000 kg, Форгиращ чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Nedpfx Afotgpdzs Ijkt