HAITIAN ZHAFIR ZERES ZE1900

HAITIAN ZHAFIR ZERES ZE1900

Sąlyga: naudotas, Gamybos metai: 2022, spaudimo jėga: 320 kN, darbinio tūrio: 1 068 cm³, įpurškimo slėgis: 2 120 juosta, bendras svoris: 14 000 kg, darbo valandos: 2 907 h, sraigtinio konvejerio skersmuo: 65 mm, Pristatymo sąlygos: FCA Pegnitz Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis Lodpfx Ajxluk Sjf Isrg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tons Lrodjhrw Amepfx Af Isg Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units

Gamybos metai: 2002, Sąlyga: geras (naudotas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Lredpfx Aelz Rvlsf Ijg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all important details.

Gamybos metai: 2013, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 6012, Labeling Machine EcoLine 100-XSR Year of Manufacture: 2013 – Serial No. 6012 Passage Width: 100 mm Stopping Accuracy: +/- 0.5 mm Minimum Label Length: 10 mm Minimum Label Width: 10 mm Inner Diameter of Label Roll: 40/76 mm Outer Diameter of Label Roll: 300 mm Power Supply: 115/230 V, 50/60 Hz Lredelgz U Sopfx Af Ieg Power Consumption: 400 VA Certification: CE IP Protection: IP44 (optional IP54) Online video inspection possible via Skype Video. We would be delighted to welcome you to our premises – more machines available from stock. Immediately available – can be inspected. Located in Emskirchen / Nuremberg – testing possible on site.

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191523, spaudimo jėga: 490 kN, varžto skersmuo: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Lsdpfx Afev Tb U Do Ierg Year of manufacture: 2013 Machine No.: 191523 Screw diameter: 30 mm Tie bar spacing: Tie-barless Location ring diameter: 125 mm

Gamybos metai: 2022, Sąlyga: naujas, For sale is an NS 2 conveyor belt from Mass International. You have the option to purchase the belt either with or without a separating roller. The separating roller is available at an additional cost of €332. Infeed width: 600 mm Lodpfx Aof E E Iqof Ierg Belt length (incline): 1,300 mm Overall width: 405 mm Usable width: 350 mm Constant belt speed: 3 m/min

Gamybos metai: 2011, Sąlyga: geras (naudotas), Prekės ženklas: Babyplast Tipas: 6/10P Lredpfox Rzbwex Af Iog Pagaminimo metai: 2011

Sąlyga: naujas, Dimensions (L x W x H): 790 x 460 x 960 mm Weight: 70 kg Number of drawers: 7 Tool trolley with 7 drawers, equipped with tools - All extendable drawers are ball bearing mounted. - The entire workshop trolley is lockable. - Drawer 1: 1/4" premium ratchet. 1/4" universal joint 45 mm. 1/4" extension 100 mm. 1/4" socket set: 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" universal joint 55 mm. 3/8" extension 150 mm. 3/8" socket set: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long sockets: 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" universal joint 75 mm. 1/2" extension 125 mm. 1/2" sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm. 1/2" long sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm. - DRAWER 2 Ring, ratchet and socket set consisting of: Sockets: 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30 mm. - DRAWER 3 1/4" bit holders TT8, TT9, TT10, TT20, TT25, TT27, TT30, TT40. 1/4" insert bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" insert bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" bit holders S0, S1, S2, S3, S4. 1/4" bit holders V6, V8, V10. 1/4" bit holder H6. 1/4" insert bits FD4, FD5.5, FD6, FD7. 1/4" insert bits PH1, PH2, PH3. 1/4" insert bits PZ0, PZ1, PZ2, PZ3. 1/4" insert bits H2, H4, H5. 8mm insert bits PZ1, PZ2, PZ3, PZ4. 8mm insert bits PH1, PH2, PH3, PH4. 8mm insert bits T20, T27, T30, T35, T40, T45. 8mm insert bits SL4, SL5.5, SL6, SL6.5. 8mm Allen hex bits 7, 8, 10. 1/2" spline bits M18 (POWER) 1/2" insert bits H14, H17, H19, H22, H24. 1/2" spline bits M16. 1/2" spline driver M16, 100 mm long. 1/2" bit holders T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" bit holder R9 - 100 mm long. 1/2" pick-up bits R10 - 140 mm long. 1/2" bits T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" bits H10, H11, H13 - 140 mm long. 1/2" bits M10, M12, M14 - 140 mm long. 1/2" bit holder H5 - 160 mm long. 1/2" pick-up bits H7 - 230 mm long. 1/2" bit holders R7, R8 - 230 mm long. 1/2" bit holder H7 - 230 mm long. 1/2" bit holder T30 - 300 mm long. 1/2" adaptor to 10 mm square drive. - DRAWER 4 Flat screwdrivers: 2.5x50, 3x75, 5x100, 6x100. Phillips screwdrivers: PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact screwdrivers flat: 5x75, 6x100, 8x150, 6x38 stubby. Impact screwdrivers cross: 5x75, 6x100, 8x150, 6x38 stubby. - DRAWER 5 T-handle hex keys with ball end: 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. T-handle hex keys: 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Bent nose pliers 150 mm. Side cutters 150 mm. Internal bent circlip pliers 170 mm. External bent circlip pliers 170 mm. Lsdpfxou Imnpo Af Iorg External circlip pliers 180 mm. Circlip pliers: 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm. Claw hammer with fibreglass handle. - DRAWER 7 Nut driver 6 mm. Nut driver 7 mm. Nut driver 8 mm. Nut driver 10 mm. Nut driver 11 mm. Nut driver 12 mm. Nut driver 13 mm. Nut driver 14 mm. Nut driver 15 mm.

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Galimi du BOY 55M, pagaminimo metai 2005. Užveržimo jėga: 550 kN, sraigto skersmuo: 38 mm, judesio tūris: 196 cm³, įpurškimo slėgis: 2000 bar, plokščių matmenys: 565 mm / 540 mm, tarpų tarp juostų: 360 mm / 335 mm. Detalės aukštis min./maks.: 250 mm / 650 mm, atidarymo eiga: 400 mm, maks. plokščių atstumas: 1050 mm, išstumtuvo eiga: 80 mm, maks. įrankio svoris: 600 kg. Matmenys X/Y/Z: apie 3300 mm / 1200 mm / 2100 mm, svoris: apie 2300 kg, darbo valandos: 29 664 h, valdymas: Procan MD. Įskaitant roboto sąsają Euromap 12. Lredpfx Afotyayps Isg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar spacing: 370x320 mm - Maximum platen size: 550x530 mm - Ejector: hydraulic - Clamping system: hydraulic Lrsdpfxsk Rnq No Af Ijg Control system: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW