Chiller

GWK weco 48.1 WZX

Būklė: geras (naudotas), Gamybos metai: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Credpfsh Hbpwjx Apaji Available: 14 units

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Plate Heat Exchanger APV H17 7.41 l 4.8 nm³ 800 kW APV H17 MGJ Plate Heat Exchanger /ct2227/ Cjdswx Hz Sepfx Apajri Manufacturer: APV Model: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08 nm³ Rated output: 800 kW Width: 340 mm Height: 1050 mm Connection height: 137 mm Depth: 60 cm Pipe connection: DN50, EN 1092 Capacity: Primary: 7.41 litres Secondary: 6.86 litres Max. pressure: 10 bar Test pressure: 15.53 bar Max. temperature: 110 °C Pipe connections made of stainless steel.

Būklė: naudotas, Gamybos metai: 2011, mašinos/transporto priemonės numeris: 1205, Perfect Binding Line Kolbus KM 412.B Year of manufacture: 2011 Comprising: Book Block Feeder Cedpfx Apot Rmhajasri Meccanotecnica XMT Year of manufacture: 2011 - Right-side feed belt Gathering Machine Kolbus ZU 841.B Year of manufacture: 2011 Description: - Manual feeding station - Universal underframe: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet type detection: SignalLynx Card Gluer Kolbus KK 841 - Hotmelt gluing: Nordson Problue - Air Center: VariAir central system - Eject delivery for incomplete products: AS 841 - Setup element - Intermediate element with vibration - Transfer to the binder Perfect Binder Kolbus KM 412.B Year of manufacture: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Exclusive dust extraction, machine was connected to central dust extraction system - Drive station for 1st spine gluing unit - Cold glue spine gluing unit, interchangeable - Intermediate drying station (infrared) - Drive station for 2nd spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: LH 375.C - 1st PUR spine gluing unit, interchangeable - Premelter for PUR spine gluing unit: Nordson XNO 962 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Premelter for side gluing unit: LH 375.A - Gauze station - Heating elements in curve: IR - Overlapping cover feeder: SAL 413.B - Scoring station: 6 - 1st pressing station - 2nd pressing station - Laying-off device (to the left) Conveyor Section Kolbus TSE Description: - Transport system, length (approx.) - Emergency delivery Drying tower Three-Knife Trimmer Kolbus HD 153.P Year of manufacture: 2011 Product counter: 148 million Description: - Co-Pilot with touchscreen - Infeed from right - Counting stacker - Knife presetting device - Total number of knife sets: 2 - Exchangeable cutting cassettes (standard set): 7-18 - Silicone spray device Book Stacker Kolbus (RIMA) XRS 130 Year of manufacture: 2011 Description: - Compensating book stacker - Delivery to left and right

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single Cjdpeud H Dmjfx Apaori - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged platen: 660 x 560 mm Credpspdr Aiefx Apaei Minimum mold installation height: 200 mm

Būklė: naujas, Gamybos metai: 2025, Efektyvūs šaldymo įrenginiai su R290 – oru aušinami, patikimi, draugiški aplinkai. Mūsų modeliai apima našumo intervalą nuo 20 iki 800 kW ir siūlo lanksčias galimybes su arba be laisvojo šaldymo. Privalumai: Aplinkai draugiškas šaltnešis R290 su mažai šiltnamio efektą sukeliančių dujų potencialu Oru aušinami, su vidiniu siurbliu ir talpa Crsdpfx Aefqllwjpaji Pasirinkimai: su laisvuoju šaldymu (naudojant lauko orą papildomam šaldymui), sumažina elektros suvartojimą, ypač vėsiu metų laiku Našumo skalė nuo 20 iki 800 kW, pritaikyta jūsų poreikiams Modernus valdymas Individuali konsultacija, planavimas ir parinkimas Pristatymo laikas priklauso nuo versijos ir komplektacijos Tvari eksploatacija dėl mažų CO2 emisijų ir žemų eksploatacinių sąnaudų Mielai pakonsultuosime, kuris sprendimas jums optimalus.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, CNC tekinimo ir frezavimo centras Okuma Multus B300II-W Valdymas: OSP-P 300SA Pagaminimo metai: 2022 Vidinis mašinos Nr. 55 X ašis: 580 mm Y ašis su eiga: (+80/-80 mm) 160 mm Z ašis: 935 mm B ašis: iki 225°, pozicionavimas 0,001° W ašis: 1.000 mm Sūkių ilgis: 900 mm Sūkių skersmuo: 630 mm Įrankio tvirtinimas: HSK A63 Įrankių magazinas: 40 vietų Crjdpfx Apjy Ewy Ssaoi Įranga: - Įrankių stebėjimo sistema - Įrankių matavimo įrenginys - ONE touch IGF - Grandininis diržinis transporter - Aušinimo skysčio bakas su 20 barų siurbliu - Paruošimas proceso matavimui - Įrankių aukščio korekcija Y ašyje tekinimo įrankiams - Hi-Cut Pro didelės spartos valdymas

Būklė: naujas, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum External Volume: 50 l at 95°C *Hydraulic Functional Features: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring by magnetic float switch - Dirt filter in return flow and cooling water inlet - Reversing circuit for leak-stop operation - Manual tool drainage via leak-stop operation and actuation of a vent valve at the rear of the unit - Fill duration monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meter *Electrical Functional Features: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, located at the rear of the controller on terminal strip - Heater control via SSR - Control box IP54 - 20mA TTY interface; pin assignment Arburg - Cekon plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heater made of Incolloy - Device mounted on castors, two of which are steerable with brakes - Additional temperature safety for secure shutdown of the heater via heater circuit protector *Cooling: Cooling capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: G3/8" female thread (Capacity based on 80°C flow temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Max. delivery rate: 40 l/min Max. delivery pressure: 3.8 bar Motor power: 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weight / Colors Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: housing: RAL 7035 light grey; front door: RAL 5015 sky blue *Connections: Circulating medium: G1/2" female thread Cooling water: G3/8" female thread Cjdpfx Apjfnvvieajri Filling (option) *This device complies with European directives. Other directives and standards are only met if stated in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard are listed in offers or order confirmations.

Būklė: naudotas, Gamybos metai: 1966, Frezavimo staklio ilgis: 525 mm Stalo paviršiaus matmenys: 500 x 300 mm Staklio matmenys (ilgis x plotis x aukštis): 1,98 x 1,06 x 1,42 m Crjdpfjtumrasx Apaoi Priedai: staklių spaustuvas (žandų plotis 200 mm), montuojamas ant besisukančio disko, vertikalus frezavimo įrenginys, ašmenų pakėlimo mechanizmas.

Gamybos metai: 2000, būklė: naudotas, Used filterless suction conveying unit Csdpfxodlpyno Apajri