Platus juostinis šlifuoklis

GIMENO SEM/2/600

Būklė: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Gbedpfsgtm U Asx Aa Uel Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 100 h, Specializuojamės pūstuvų, kompresorių ir vakuuminių siurblių atnaujinime. Remontuojame tokių gamintojų įrangą kaip: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Taip pat siūlome pūstuvų ir kompresorių nuomą. Veikiame visoje Europoje ir už jos ribų. Gjdpfxjn Tntqe Aa Ujbl

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Gsdpog A D Ansfx Aa Ujbl Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Būklė: naujas, Gamybos metai: 2025, Working width: 408 mm Cutterhead: Strip knives Number of knives: 3 Jointer table length: 1640 mm Jointer fence tiltable: yes Raising jointer tables: manual Maximum thicknessing capacity: 225 mm Thickness table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: continuous Table rollers: no Gbodowfcqcspfx Aa Ujl Motor power: 3 kW Motor brake: yes, automatic Extraction port: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 kg

Būklė: naujas, Drilling capacity in steel (diameter): 40 mm Throat depth: 370 mm Drilling stroke: 200 mm Spindle taper: MK 4 Table: 580 x 460 mm Column diameter: 160 mm Speed range: 75 – 2,020 rpm Feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev Total power requirement: 1.5 kW Machine weight: approx. 700 kg Dimensions (L x W x H): 1.1 x 0.6 x 2.35 m High-quality column drilling machine for industrial use. Also suitable for multi-shift operation. • Machine base allows clamping of tall workpieces • Digital depth gauge • Gear head swivels 180° • Maximum smooth operation thanks to hardened and ground gears running in oil bath • Thread cutting function • Electromagnetic clutch for feed • Automatic feed Gbjdpfxsf Nb E Rs Aa Ujl • Electric drive for table height adjustment

Būklė: naujas, Gamybos metai: 2026, Thanks to many years of experience of our CORMAK team, the DCV series extractors in the TC Viber version have been developed. The design of a new technological line has enabled us to create top-class extractors. Advantages: - Equipped with an additional pair of doors for easier bag replacement - The DCV 6500TC extractor marks another milestone in the production of efficient dust and chip extractors, designed to maintain consistent extraction parameters throughout the entire work cycle - The new TC series offers a fully enclosed upper housing that absorbs noise and vibrations during operation, as well as the ability to return warm air - Maintenance-free filter shaking system with the option for automatic operation - Newly patented safety system ensures reliable operation of the device - Durable, robust construction ensures quiet and vibration-free operation of the extractor - Compact footprint, yet capable of filtering large amounts of dust and chips - Powerful and quiet fan provides high negative pressure performance - Reliability confirmed by manufacturing facilities coping with high daily workloads - Specially designed impeller blades make the units more efficient and effective, also contributing to energy savings - Very high tightness of the entire suction system guarantees the highest indoor air quality and, during the heating season, prevents heat loss - Large filter area - Possibility to build an overhead system connecting several machines operating simultaneously with DCV 6500 extractors - Fast replacement of waste bins, designed to maintain 99.99% system airtightness - Metal waste bins with mobile running gear for easy and trouble-free movement. Also equipped with a sight glass to check the fill level of the containers - Low-noise operation and high efficiency ensured by a balanced metal impeller and upgraded motor - Provides perfection and cleanliness at the workstation, directly impacting the quality of your products - Excellent cooperation with machines such as sanders, edgebanders, panel saws, etc. - Control cabinet for switching the device on/off - We guarantee high purification quality! - Polyester filter traps dust down to 5 microns; for filtering smaller particles, use e.g. a HEPA filter - Do not use this extractor in explosive atmospheres - The extractor is intended for use in the woodworking industry with sawdust, chips, and dust (not suitable for wet material such as wet sawdust) - Before starting the extractor, remove the lower beam to allow access to the chip containers - MADE IN POLAND Technical specifications: MOTOR POWER (CONTINUOUS S1): 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 6500 m³/h SUCTION PORT DIAMETER: 280 mm Gbodpfjuc U N Usx Aa Ujl SUCTION SPEED: 28–32 m/s FILTER AREA: 16 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 32 WASTE BIN CAPACITY: 500 L DIMENSIONS: 2440 x 930 x 2270 mm WEIGHT: 440 kg

Būklė: naujas, Tipas: DTL-20A Šepečio veleno aukštis: 200 mm Šepečio veleno skersmuo: 300 mm Veleno greitis: dažnio valdymas Gsdpfx Aed Tqtyea Uobl Elektrinis pakėlimas ir nuleidimas Galia: 0,75 kW Transportavimo matmenys: 860x750x1100 mm Svoris: 140 kg Atsarginės šlifuojančios juostos (šepečiai su švitriniu popieriumi) kaina: 3,6 € + PVM / 1 m

Būklė: naudotas, Gamybos metai: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring a steel contact roller and electronic CPS segmented pressure beam with 25 mm intervals - Working width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: stepless, 2.5 - 13 m/min - Sanding unit power: 11 kW Gbjdpfx Aowka Snja Usl Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 program memory slots - User-friendly menu navigation via plain text display - Visual display of active components during operation - Fully automatic PLC-controlled start-up sequence for all drives - Digital work time recording Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction ports: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air consumption: 10 l/min Weight: 2200 kg Availability: by arrangement Location: Röllbach

Būklė: geras (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, 1 naudota vibruojanti / kniedijimo mašina Gamintojas: STEINEL Tipas: NR 10 Pagaminimo metai: apie 1978 Techninės detalės Stalo paviršius: 350 x 250 mm Išsikišimas: 250 mm Reguliuojamas stalas: 400 mm Oro slėgis: iki 10 bar Bendras energijos poreikis: 1,3/1,6 kW Mašinos svoris apie: 0,45 t Gbsdpfx Aaewxxw Se Ujl Reikalinga vieta apie I x P x A: 0,7 x 0,45 x 1,8 m Duomenys pateikti be garantijos

Būklė: naujas, Gamybos metai: 2026, - TFON kraštų apvalinimo staklės Techniniai duomenys: Tinkamumas medžiagai: plienas, aliuminis, nerūdijantis plienas. Procesas: kraštų apvalinimas. Gsdpfxjui Ih Ro Aa Usbl Medžiagos storis: 0 – 120 mm Didžiausias medžiagos plotis: 1 000 mm Minimalūs detalės matmenys: 50 × 50 mm Didžiausias medžiagos svoris: 500 kg Konvejerio greitis: 0,6 – 4,0 m/min Staklių svoris: 3 000 kg