CNC tekinimo staklės

GILDEMEISTER MF 65

Sąlyga: geras (naudotas), Gamybos metai: 1999, Gildemeister MF Twin 65, pagaminta 1999 m., valdymas Siemens 840 D, eiga X/Z 190/555 mm, 1 x Y ašis +/- 40 mm, 2 revolveriai po 12 pozicijų, pavariniu įrankių pajungimas, VDI 30 laikiklis, C ašis, veleno greitis iki 6 000 aps./min., didžiausias strypo pravažiavimas iki 65 mm, strypų padavimas yra pridedamas, bet mašinoje nebeįrengtas. Codjw Swcxspfx Ahvohc

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 140 810 h, Funkcionalumas: visiškai funkcionalus, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar loader Annual maintenance carried out by DMG, last service on 08.07.2024: - Linear guideways, axial bearing, ball screw and adjusting nut of X1 axis replaced Chsdpfxou Dg Ubj Ahvoc - Linear guideways, axial bearing, ball screw and adjusting nut of Z1 axis replaced - Linear guideways, axial bearing, ball screw and adjusting nut of X2 axis replaced - Linear guideways, axial bearing, ball screw and adjusting nut of Z2 axis replaced - All sliding sheet scrapers replaced; safety glass of the work area door renewed - Replacement of all feed timing belts as well as the timing belt for the sub-spindle drive - Tool drive 1 dismounted, disassembled, cleaned and fitted with new bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 exchanged - Main and sub-spindle chucks dismantled and cleaned - Machine geometry and work area newly measured and adjusted - Hydraulic filter cartridges replaced; pneumatic filter replaced For technical specifications, see attachment The machine can be inspected powered up Price €25,000 negotiable This offer is non-binding and subject to prior sale; changes or errors in technical data or equipment are reserved Used machines are purchased as seen, without guarantee or warranty claims. Delivery ex works, packaging and insurance excluded unless otherwise agreed. Price is exclusive of statutory VAT. Payment is, as usual for used machinery, due prior to loading.

Sąlyga: naudotas, Gamybos metai: 1998, veikimo valandos: 97 593 h, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 65 mm, veleno skylė: 79 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 25 aps./min, For sale: Gildemeister MF Sprint 65 CNC lathe with 3-meter bar feeder, as shown in the photos. The machine was dismantled from our workshop in fully functional condition. A video of the machine in operation prior to dismantling can be provided on request. Approximately five years ago, the linear guides of the X1 and Z1 slides (main spindle side) were renewed, including bearings and belts. Recently, a new HMI interface was installed. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: SIMAG 65.1-3200G, year of construction 1998 Bar length: 3 m Bar diameter/spindle bore: 65 mm Main drive Power rating: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis holding torque: 180 Nm Tool turret Number of tools: 8 Shank diameter to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool turret 1 speed: max. 4,000 rpm Tool turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Cedpfxjwym Nfj Ahvehc Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Dimensions incl. bar feeder and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Cooling system - Chip conveyor - Documentation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, veikimo valandos: 65 543 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 501637, sukimosi greitis (maks.): 4 500 aps./min, strypo skersmuo: 65 mm, įrankių magazino lizdų skaičius: 16, Įranga: dokumentacija / vadovas, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter / spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Sub-spindle: 3-jaw chuck Main Drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm Cjdewkp Ifspfx Ahvjhc C-axis torque (holding torque): 180 Nm Turret Number of tool stations: 8 Shank diameter according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Turret 1 speed: max. 4,000 rpm Turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions incl. bar feeder and chip conveyor (LxWxH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Finished parts catcher - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - Including 2 tool holders

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 501628, veleno greitis (maks.): 4 500 aps./min, X ašies eiga: 155 mm, Z ašies eigos atstumas: 280 mm, strypo skersmuo: 65 mm, ašies skersmuo: 79 mm, Machine package: 2 machines = 1 x fully functional machine + 1 x donor machine for spare parts TECHNICAL DETAILS Bar diameter (standard): 65 mm Main spindle Spindle nose (flat flange): 140h5 mm Spindle bore diameter: 79 mm Draw tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% DC): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% DC): 320 / 240 Nm Traverse speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Ball screw pitch (X x X): 15 x 25 mm Ball screw pitch (X x Z): 15 x 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Ball screw pitch (X x X/Z): 15 x 25 mm Chedpfxjvviwxo Ahvjc Tool turret Number of tools: 8 Tool shank: shank Ø per DIN 69880 Number of driven tool stations: 4 Maximum power (40%/100% DC): 7.6 / 4.6 kW Maximum torque (40%/100% DC): 24 / 14.7 Nm Maximum speed (tool turret 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle nose diameter (flat flange): 120 mm Indexing device: infinitely variable positioning MACHINE DETAILS Overall length (with chip conveyor): 3,500 mm Overall height (with control cabinet): 1,625 mm Overall width (with control cabinet): 1,750 mm Machine weight incl. control cabinet: 5,000 kg Weight of integrated bar feeder: 900 kg Hydraulics Capacity: 9.8 l Pump capacity: 1.1 kW Coolant system Capacity: 160 l Pump capacity: 1.65 kW Flow rate at 8 bar: 25 l