CNC tekinimo staklės

Traub TNX 65

Būklė: naudotas, Gamybos metai: 2005, Technical Details: Bdsdpfewp D Nbex An Hjh Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Gamybos metai: 2016, būklė: labai geros būklės (naudotas), 1 used short bar loader Bjdoht Rl Eepfx An Hodh Manufacturer: Breuning Model: ILS RBL 80/12 Year: 2016 Clamping range: 5-80 mm diameter Bar length: 100-1200 mm

Būklė: naudotas, Gamybos metai: 2007, Apdirbamo detalės skersmuo – 275 mm Apdirbamo detalės ilgis – 900 mm Valdymo sistema – TRAUB TX8i-s Velenos kiaurymės skersmuo – 65 mm Velenos greitis – be pakopų reguliavimas, nuo 1 iki 5 000 aps./min. Velenos skersmuo priekiniame guolyje – 110 mm C ašis – nuo 1 iki 500 aps./min. X ašis – 175 mm Bodpfszwg Ndjx An Hjdh Z ašis – 650/975 mm Y ašis – +/- 40 mm Greitasis judėjimas X/Y/Z – 20 / 40 / 20 m/min. Stūmimo jėga X/Y/Z – 5,5 / 5,5 / 10 kN Įrankių laikiklis – stotelių skaičius 10 Varomų įrankių skaičius – 10 Įrankių greitis – nuo 1 iki 6 000 aps./min. Variklio galia – 25 % ciklo trukmė, 5,50 kW Sukimo momentas esant 25 % ciklo trukmei – 17,50 Nm Įrankio tvirtinimo sistema – DIN 69880, Ø30x55 Velenos skersmuo priekiniame guolyje – 110 mm Bendrasis energijos poreikis – 95,00 kW Staklės svoris – apie 16,00 t Reikalingas plotas – apie 10,00 x 3,50 x 3,00 m

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, veikimo valandos: 6 542 h, ašies variklio galia: 24 000 W, veleno greitis (maks.): 5 000 aps./min, bendras svoris: 9 500 kg, ašių skaičius: 11, Šis 11s TRAUB TNX 65/42 modelis pagamintas 2012 m. Jo maksimalus tekinimo skersmuo yra 175 mm, o tekinimo ilgis – 650 mm. Staklės turi galingą pagrindinį suklį, kurio greitis siekia iki 5 000 aps/min, ir priešingą suklį, kurio greitis siekia iki 7 000 aps/min. Jei ieškote aukštos kokybės tekinimo ir frezavimo galimybių, apsvarstykite galimybę įsigyti mūsų siūlomą tekinimo-frezavimo centrą „TRAUB TNX 65/42“. Dėl išsamesnės informacijos susisiekite su mumis. • Darbo valandos: 26 946 val. • Maks. tekinimo skersmuo: 175 mm • Maks. tekinimo ilgis: 650 mm • Pagrindinio veleno strypo talpa / skylė: 65 mm • Maks. veleno sukimo momentas: 275 Nm • Priešinio veleno sukimosi greitis: iki 7 000 aps/min • Priešinio veleno strypo skersmuo: 42 mm • Įrankių revoliucinės galvutės: 3 × 10 pozicijų • Greitasis poslinkis X ašyje: 30 m/min • Greitasis poslinkis Z ašyje: 40 m/min Bedoz Dk Rijpfx An Hsdh • Nominali galia: 83 kW • Prijungtoji apkrova: 68 kVA • Maitinimo įtampa: 400 V, 3~, N, PE, 50 Hz • Nominali srovė: 134 A Technical Specification Counter Spindle Yes Driven Tools Yes

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 29 000 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, The INDEX C200 – built in 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret design, with turrets 1 and 2 each providing X-, Z-, and Y-axis movement, while turret 3 is dedicated to operations on the counter spindle. All three disc turrets offer 10 stations each, enabling highly flexible complete machining with powered tools at up to 6,000 rpm. Equipped with a parts handling gantry, conveyor, C-axes on both main and counter spindles, and powerful spindle drives, this machine is particularly suitable for productive series manufacturing of complex turned/milled components. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Z-axis: 700 mm travel Bdodpfxoy Tmhzj An Hjh Z-axis rapid traverse: 50 m/min Tool carriers / turrets Three-disc turret configuration, each with 10 stations. Tool system for 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm as per documentation Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical equipment as per documentation Gantry loader with numerically controlled Z-axis Part discharge from main or counter spindle onto conveyor Remnant removal from main spindle into remnant bin Gantry loader: Traverse speed: 100 m/min Travel range: 70 mm Maximum workpiece diameter: 90 mm Maximum workpiece length: 250 mm Maximum remnant length: 250 mm Maximum workpiece weight: 3.5 kg Hydraulic system: Delivery flow: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery flow: 19 l/min Cooling unit capacity: 13 kW Coolant system: Pump flow rate: 80 l/min / 8 bar Tank volume: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Būklė: naudotas, TECHNICAL DATA Bjdpfsuhadzox An Hodh - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm Bedpfx Anoyw H Szs Hedh - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 degrees SUBSPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel path: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status light - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Iš dalies renovuota Valdymas: Heidenhain Manual Plus 620 Darbinė sritis: Apsisukimų skersmuo virš lovos: 475 mm Apsisukimų skersmuo virš plano sklendės: 260 mm Pjūties eiga (planas): 260 mm Atstumas tarp centrų: 1000 mm Sukimosi ilgis: 880 mm Pagrindinis veleno pavara Variklio galia – AC variklis – 40 % ED: 25 kW Veleno korpusas Veleno galvutė DIN 55026: A6 dydis Veleno skersmuo priekinėje atramoje: 115 mm Veleno skylė: 78 mm Sūkių diapazonas (pastovus V): 1–3000 aps./min. Kryžminis vežimėlis Poslinkio diapazonas (planu): 0,001–1000 mm/min Poslinkio diapazonas (išilginis ir sriegimui): 0,001–2000 mm/min Greitas grįžimas (planu/išilgai): 5/10 m/min Uodegėlės stovas Smailės skersmuo: 70 mm Smailės eiga: 120 mm Bjdpfx Aoyffigsn Hsdh Vidinis smailės kūgis: 5 Mk

Būklė: naudotas, Gamybos metai: 2005, Turning diameter: 275 mm Turning length: 900 mm Control system: TRAUB TX8i Spindle bore: 65 mm Bodpfx Answ E Nnbj Hsdh Drive power, 100% duty cycle: 25.20 kW Drive power, 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds, stepless: 1 - 5,000 rpm Spindle diameter in front bearing: 110 mm C-axis: 1 - 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Max. hexagon: 45 mm Total power requirement: 95.00 kW Machine weight approx.: 16.00 t Installation dimensions approx.: 10.00 x 3.50 x H3.00 m Equipped with TRAUB TX 8i control, main and counter spindle with C-axis, 3 turret tool carriers, 1 vertical tool carrier with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package The machine can be inspected under power.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2007, I formos plienas – plokščias, 50 x 10 mm I formos plienas – statmenas, 80 x 15 mm Kampinis plienas, 50 mm Apvalus profilis, 30,0 mm Bedpfx Ajt U R H Usn Hodh Vamzdžio skersmuo, maks. 1 1/2 colio (mm) Pilnas profilis – skersmuo 30,0 mm Svoris 185 kg Matmenys (ilgis x plotis x aukštis) 670 x 530 x 1350 mm Kvadratinis profilis, 40 x 40 x 3 mm Vamzdžiai, 60 x 2,0 mm Veleno storis 30 mm Bendrasis galių poreikis 0,75 kW Demonstracinis įrenginys Įranga: – mašinos pagrindinis rėmas – kojinis jungiklis – standartiniai valcai (padalyti) – galima horizontaliai ir vertikaliai lankstyti – mašina turi tik vieną pavarą (judėjimas į dešinę ir į kairę)