CNC tekinimo ir frezavimo centras

TRAUB TNX65

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Aprašymas bus pateiktas vėliau Chjdpfx Asx A Hdfsdmef

Sąlyga: naudotas, Gamybos metai: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Chodpfswp D Nbox Admef Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW Chjdpfxeuhadzs Admef - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 51 400 h, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of Manufacture: 2011 Control: TX 8i-s Main / Sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Brief loader: Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Cedpfxswxc Hke Admehf Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 37 000 h, Funkcionalumas: visiškai funkcionalus, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000h Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer's tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see pictures) - Breuer bar loader (1200mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. main spindle chuck diameter: 175 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel range: 700 [mm] LEFT UPPER TURRET HEAD Chjdpjwm Igfjfx Admef - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 95 [kW] WEIGHT AND DIMENSIONS - Required space: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Sąlyga: geras (naudotas), Gamybos metai: 2007, Traub TNX 65/42 Centro di tornitura e fresatura Anno di costruzione: 2007 N. di serie: 7060107 Entrata in servizio: 2010 Controllo TX 8i-S (controllo basato su Mitsubishi/Traub con motori e azionamenti Mitsubishi) 15 assi CNC Cjdjq Npqmjpfx Admjhf 4 torrette X-Y-Z ciascuna con 10 posizioni. Fino a 20 utensili per torretta Mandrino principale e contromandrino con foro passante da 65 mm (contromandrino con lavaggio refrigerante) Comando a pedale per serraggio/sgancio dei mandrini Ricevitore portale azionato da servomotore Sistema di rotazione idraulica con pinza pneumatica per pezzo finito e residuo barra Nastro trasportatore per pezzi finiti Filtro refrigerante a nastro cartaceo RESY Vasca del refrigerante Knoll con controllo della temperatura mediante gruppo frigorifero BKW Pompe del refrigerante ad alta pressione 20 bar e a bassa pressione 8 bar Evacuatore trucioli Knoll Caricatore di barre FMB Turbo 5-55 (nuovo del 2010) 2 portautensili tornitura singoli 2 portautensili tornitura doppi 1 portautensile di troncatura 1 portautensile motorizzato doppio radiale ER portapinza 1 portautensile motorizzato radiale ER portapinza 4 portautensili motorizzati radiali ER portapinza 1 portautensile motorizzato radiale porta frese cilindriche 1 portautensile motorizzato radiale ER portapinza orientabile 2 portautensili motorizzati radiali porta frese a disco 2 portautensili motorizzati assiali porta frese cilindriche 6 portautensili motorizzati assiali ER portapinza 43 ulteriori portautensili su elenco separato (vedi allegato supplementare) Mandrino principale Hainbuch con autocentrante portapinza Contromandrino Rohm autocentrante a 2 griffe 2 set di viti a ricircolo di sfere asse Z e pacchi cuscinetti di ricambio