B1 dažymo mašina

General - Aeroterm

Sąlyga: labai geros būklės (naudotas), ROLLER COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length approx.: 1600 mm Integrated control cabinet with operator panel Driven conveyor carpet for workpiece feed (with servo controller, rated power 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 working units: * 1st unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath * 2nd unit (with 2 rollers): Gkedpsidqwpefx Abmef Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath

Gamybos metai: 2008, Sąlyga: naudotas, Panel return system for use with a single edge banding machine. The panel is conveyed to the operator via a motorized belt and a roller/belt table. Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel thickness: 60 mm Gsdporxzb Rofx Abmokf Working speed: 8 - 25 m/min Working height from floor: 835 - 960 mm

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS 11. FINISHING ROLLER 12. UV LAMPS Gsdpfx Absk Scufomskf 13. OUTFEED CONVEYOR

Sąlyga: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor Gedpfjv I Akvex Abmskf - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Sąlyga: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operating side: left - Gun drive: single design - Dry extraction - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed: 1.5 - 7 m/min - PLC control with touchscreen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices Gsdsv N D Ewspfx Abmokf - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~ 7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide an offer for the installation and commissioning of the system, as well as training of your employees. Upon request, we can also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Sąlyga: geras (naudotas), Gamybos metai: 2009, Parduodama dažymo linija GIARDINA MOS/4PLUS Gksdetxnp Njpfx Abmsf

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, The Ceetec P40 is the smallest device in the series of brush coating machines and is particularly suitable for use in smaller craft workshops, painting studios, carpentry shops, and building supply yards. It allows for quick, repeatable coating of both flat and profiled elements. Its uncomplicated construction makes the device extremely easy to operate. Gjdpfxjxp E A Tj Abmokf This is the most popular device among wooden house manufacturers. Its compact dimensions allow it to be transported easily to construction sites. Thanks to the use of conical brush heads, the optimal finish quality and high repeatability of coated surfaces can be achieved. The machine is designed for water-based products and is not suitable for work in ATEX zones. Accessories: It is possible to purchase additional equipment such as roller tables, bag filters of various thicknesses, and horsehair brushes. TECHNICAL DATA: Maximum cross-section of workpieces: 25 x 175 mm or 40 x 100 mm Minimum length of workpieces: 800 mm Power supply: 3 x 400 V + PE, IP class 65 Power: 0.37 kW Throughput: up to 1,400 m/h Weight: 115 kg ADVANTAGES OF CEETEC P40: Small and handy model on wheels Ideally suited for coating cladding boards, decking boards, soffit boards Quick adjustment of working width and easy paint change Fast return on investment Equipped with rubber-coated transport wheels

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, X ašies padavimo greitis: 27 m/min, darbinis plotis: 400 mm, garantijos trukmė: 12 mėnesiai, galia: 2,5 kW (3,40 AG), Pasiekite nepriekaištingus dangos rezultatus ant medienos, MDF ir kitų lygių medžiagų su Soest voleliu dengimo mašina. Puikiai tinka baldų, grindų ir plokščių gamybai – užtikrina pastovią apdailos kokybę ir didelį gamybos našumą. Tinka vandens pagrindo, UV, LED alyvos, šarmo, beico ar lako dengimui. RC-L modelis specialiai sukonfigūruotas lakavimo darbams – su dozavimo ir dengimo voleliais, peiliukais ir reversine dozavimo voleliu. Papildomai galima užsakyti kitų tipų volelius arba RC-L peilių sistemą. Gjdexuh T Eepfx Abmokf Susisiekite dėl pasiūlymo arba apsilankykite mūsų bandymų centre ir pamatykite įrenginį gyvai.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008157, Didžiausias apdirbamas plotis: 250 mm Didžiausias apdirbamas storis: 80 mm Gkodpjw Sdu Uofx Abmjf Ištraukimo sistema: sausa Lako purkštuvų skaičius: 4 Paskirtis: lakui Lako purškimo ciklų skaičius: 1