Karkasinis presas

Gannomat CONCEPT 70

Gamybos metai: 2025, būklė: naujas, New Machine Year of manufacture: 2025 Features and technical data: Complete in standard configuration with: - Robust, torsion-resistant steel frame, manufactured as a welded and bolted structure - Top lamellar pressure beam with 6 elements, side lamellar pressure beam with 5 elements - Lamellar pressure beams with field-proven tolerance compensation (Ganner system) for tightly clamped carcass joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing area with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of the two pressure beams via precision trapezoidal threaded spindles (with enhanced lead and runout accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively, using 2 separate worm gear motors (2 x 0.75 kW each) - The pressure force of the beams can be steplessly adjusted electronically with 2 potentiometers and is regulated via frequency converters, ensuring completely wear-free pressure control - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/sec - Jog function for precise positioning of both pressure beams, e.g., for low pressing forces, drawers, and carcasses at 45° - Simple operation via 6 separate push buttons; 8 movement cycles can be selected via control panel - Freely adjustable press time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of the two pressure beams - Re-press function to increase or decrease pressing force during the pressing process Dsdpfxow Nafkj Ac Dekk - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Press speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be disabled for pressing special components. Including set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Būklė: geras (naudotas), Gamybos metai: 1995, maks. pjovimo ilgis 6200 mm maks. pjovimo plotis 600 mm maks. pjovimo aukštis 170 mm variklis 11 kW Dkodpfx Acsxiu Dtj Dek

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Technical Data: Dsdpsb Eln Djfx Ac Dskk Lamella carcass press from our showroom; Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm; Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg); Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg); Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. The machine is available in our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg

Būklė: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Dkjdpfow Sgnkjx Ac Dek Availability: short notice

Būklė: naudotas, Gamybos metai: 2014, CNC Machining Center Biesse Skill 12 24 G FT Year of manufacture: 2014 Machine no.: 60961 Tool holder: HSK F63 10x vertical drilling units 12 tool changer positions Software: BiesseWorks X-axis: 2465 mm Y-axis: 1260 mm Z-axis: 324 mm Disassembled for transport on a standard trailer; 4500x2200x2400mm; Net weight: 2000 kg - Special notes: - The pallet with the white electrical cabinet does not belong to this machine Dkjdpownhanofx Ac Dok - Year of manufacture: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of router spindles: 1 - Table type: Flat table - Drilling tools included: Yes - Number of vertical drilling spindles: 10 - Tool changer positions: 12 - Vacuum pump included: Yes - Quantity: 1 - Brand: Becker - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Working range Z-axis [mm]: 324 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector. Glenn Smeets

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. Djdpfxoiidm Ne Ac Dekk - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Gamybos metai: 2024, New demonstration machine! List price: €32,665 complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Top lamella pressure beam with 6 elements; side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Back pressure surfaces (side pressure wall and base) are continuous, coated support panels, 38 mm thick - Continuous pressing surface with a height of 95 mm at the lower vertical pressure beam Dodpjuf Hx Hefx Ac Dekk - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing is performed electromotively via two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and controlled by a frequency converter, resulting in absolutely wear-free press force regulation - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing force for vertical pressure beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing and adjustment speed of pressure beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 individual push buttons; 8 movement sequences selectable via the control system - Freely adjustable press time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm - Weight: approx. 1800 kg - Net dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: - Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm) Storage location:

Būklė: naudotas, Naudota mašina Pagaminimo metai: 1991 Pilnai automatinė, stovima, Pjovimo diapazonas: 5.300 x 2.200 mm (pjovimo plotis x pjovimo aukštis), Pjūklo disko skersmuo: 300 mm, Valdymas vertikaliems ir horizontaliems pjūviams, su ALU atlenkiamais ribotuvais ir ALU vidurine atrama, su SUPER-CUT priešpjovimo įrenginiu Variklis: 3 kW - 400 V Dsdpfx Asx Rr D Aec Dekk Prieinamumas: iš karto Vieta: Röllbach

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 Dkodpevxgrrefx Ac Djk including the following options: - Rapid traverse speed: adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing, as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Minimum pressing force: 300/500 daN (kg) for Concept Eco, minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco, maximum pressing force: 3500 daN (kg) for Concept Primus • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely selectable pressing time preset with automatic opening • Concept Eco: Simplest operation via six separate pushbuttons for eight movement sequences • Concept Primus: Simplest operation via LCD display Universal application: • Cabinets, e.g. for furniture and cupboards • Mitered carcases • Carcases with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple cabinets / drawers Advantages: • Proven tolerance compensation (GANNOMAT system) • Electromechanical cabinet press with frequency-controlled gear motors • Independently adjustable vertical and horizontal pressing beams • Extended service life thanks to proven, high-quality components • Sturdy and robust construction • Space-saving design • Cabinet pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy to operate via straightforward and practical control panel • Fast thanks to beam positioning speeds up to 50 mm/sec (optional) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture cabinets and drawers • Professional production of cabinets and drawers with a modern cabinet press

Būklė: geras (naudotas), Gamybos metai: 2005, Išilginio pjovimo pjūklas labai geros būklės iš Šveicarijos įmonės maks. pjovimo ilgis: 6200 mm maks. pjovimo plotis: 420 mm maks. pjovimo aukštis: 170 mm su lazeriu su valdymu Djdpfx Ajx E Nplsc Dokk