Ekscentrinis presas - viena kolona

FMS PF - 30 P

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock Ibjdpfsuiy Hrox Acroc - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts Ibodpfxouiy Ngs Acrec - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: geras (naudotas), Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), spaudimo jėga: 200 t, stalo plotis: 800 mm, stalo ilgis: 1 100 mm, gerklės gylis: 440 mm, atstumo lentelė iki stūmoklio: 400 mm, bendras ilgis: 37 200 mm, bendras plotis: 24 000 mm, bendras aukštis: 18 200 mm, bendras svoris: 12 600 kg, hidraulinio cilindro reguliavimas: 110 mm, Plunger stroke: 40-180 mm Iodpfx Acetu Hvwerjbc incl. Helmerding feeder, 400 mm x 4 mm Strokes: 40 + 60 strokes/min Distance table/ram – adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Gamybos metai: 2023, būklė: naujas, Pressure: 40 t Throat depth: 195 mm Stroke: 8–78 mm Strokes per minute: 76–190 spm Ram adjustment: 60 mm Table size: 650 x 380 mm Table height: 840 mm Through hole in table: Ø 110 mm Ram area: 250 x 350 mm Pin hole in ram: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 2.2 t Iedpfsp Udupsx Acrobc Required space (W x D x H): approx. 1450 x 1220 x 2110 mm Machine number: 16053 LED machine lamp Stroke rate frequency-controlled Sick light barrier for protection and automatic feed operation 4x freely programmable electronic cams 4x freely programmable tool locks Machine feet Two-hand operation Foot pedal operation Central lubrication Mechanical break plate in the ram Pneumatic clutch-brake combination Approved for manual loading and unloading Tiltable by 25°

Būklė: naujas, Gamybos metai: 2024, Pressure: 20 t Throat depth: 155 mm Stroke: 6-60 mm Strokes per minute: 84-210 spm Ram adjustment: 50 mm Shut height, ram at top position with adjustment at top: 300 mm Table surface: 300x450 mm Table height: 840 mm Pass-through hole in table: Ø 90 mm Ram surface: 190x278 mm Pin hole in ram: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Space requirements approx. (W x D x H): 1100x1100x1900 mm Machine number: 16144 LED machine lamp Stroke rate frequency-controlled Sick light barrier for safety and cycle operation 4x Electronic cams, freely programmable 4x Tool safety devices, freely programmable Machine feet Ibodpfovfhqijx Acrjc Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading tasks

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 160 t, eigos ilgis: 300 mm, stalo plotis: 1 250 mm, stalo ilgis: 800 mm, įrengimo aukštis: 500 mm, EXNER Double Column Press EX SL 160 NEW – Machine is under construction Pressing force: 1600 kN Installation height: 500 mm Stroke: 300 mm Ijdpfx Aouw S A Djcrobc Table width: 1250 mm Table depth: 800 mm Mechanical depth stop

Būklė: naujas, Gamybos metai: 2024, Pressure: 30 t Throat depth: 180 mm Stroke: 8–76 mm Strokes per minute: 80–200 spm Ijdpfxjvfhq Aj Acrobc Ram adjustment: 60 mm Table size: 360 x 580 mm Table height: 840 mm Through-hole in table: Ø 110 mm Ram area: 250 x 350 mm Ram bore: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement approx. (WxDxH): 1350 x 1200 x 2100 mm Machine number: 16149 LED machine lamp Stroke frequency electronically adjustable Sick light curtain for protection and cycle operation 4x freely programmable electronic cams 4x freely programmable tool protections Machine feet Two-hand operation Foot operation Central lubrication Mechanical rupture plate in ram Pneumatic clutch-brake combination Approved for manual loading/unloading operations

Būklė: naudotas, Gamybos metai: 1961, Pressure: 25 t Throat depth: 200 mm Stroke: 4 – 80 mm Ibedpfxotqqxbe Acrsc Table clamping surface: 595 x 410 mm Ram adjustment: 70 mm Strokes per minute: 150 spm Table height adjustment: 240 mm Total power requirement: 1.1 kW Machine weight approx.: 1.45 t Machine dimensions (L x W x H): 1.30 x 0.80 x 2.0 m

Gamybos metai: 2023, būklė: naujas, Pressure: 30 t Throat depth: 180 mm Stroke: 8–76 mm Number of strokes: 80–200 strokes/min Ram adjustment: 60 mm Table surface: 360 x 580 mm Isdpfx Acop Uduhorobc Table height: 840 mm Clear passage in table: Ø 110 mm Ram surface: 250 x 350 mm Ram bore (taper hole): Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement approx. (W x D x H): 1350 x 1200 x 2100 mm Machine number: 16051 LED machine lamp Stroke frequency controlled by inverter Sick light barrier for safety and cycle operation 4x Electronically programmable cams 4x Electronically programmable tool protection features Machine feet Two-hand operation Foot pedal operation Centralized lubrication Mechanical shear plate in ram Pneumatic clutch-brake combination Approved for manual loading operations

Būklė: naudotas, Gamybos metai: 2021, Aprašymas Gamintojas: Felder Modelis: RL 300 Pagaminimo metai: 2021 – kaip naujas, niekada nebuvo naudojamas – Techniniai duomenys – Oro srautas: maks. 6000 m³/val. – Vardinis oro srautas esant 20 m/s: 5090 m³/val. Ijdpfx Acezv Tmmersbc – Slėgis prie bendrojo įvado esant 20 m/s: 2680 Pa – Įvado jungtis (galima montuoti kairėje arba dešinėje): 300 mm – Filtro plotas: 50 m² – Garso slėgis: 75 dB – Metalo drožlių surinkimo talpykla (litrai): 2 x 250 l Pastaba: Techniniai duomenys ir aprašymai yra kopijos iš to meto užsakymo patvirtinimo. Duomenys pateikiami tik informaciniams tikslams ir nėra privalomi.