Hidraulinis presas

EXNER EX SL 160

Sąlyga: naujas, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, and profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Operation: After adjusting the workpiece support and the side stops, the burr-laden workpiece is lightly pressed against the brush, which rotates around its own axis. The workpiece itself is not rotated; the brush performs this movement. The type of workpiece material, the thickness of the burr, and the desired edge rounding determine the contact pressure and duration, which is typically about 1–5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, infinitely variable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 mm or 3 pieces Ø300 (250) x 35 mm Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400V, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + suction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), during processing at maximum speed 82 dB(A) Dkodpfxjd Hmnfs Af Toh Scope of delivery: Rotary head deburring brush machine GratMaxx with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement No brushes included in delivery! Accessories: F50201 Circular brush, braided wire 0.38 mm F50202 Circular brush, steel wire 0.2 mm F50203 Circular brush, steel wire 0.38 mm F50204 Circular brush, VA braided wire 0.38 mm F50205 Circular brush, abrasive nylon U180 F50206 Circular brush, abrasive nylon U120 F50207 Circular brush, VA wire 0.20 mm For further technical data, please refer to the attached PDF document.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 73965, Techniniai parametrai: • Gamintojas: Rösler Oberflächentechnik GmbH (Vokietija) • Tipas: Centrifuga Z 1000 Dkjdpfxjw Rc Anj Af Teh • Pagaminimo metai: 2016 • Variklio galia: 11,0 kW • Maitinimas: 400 V / 50 Hz • Maksimalus apsukų skaičius: 2650 aps./min • Maksimalus apkrovimas: 65 kg • Maksimalus srautas: 1000 l/val. • Skysčio temperatūra (maks.): 40 °C • Užpildymo medžiagos temperatūra (maks.): 50 °C • Būgno vidinis skersmuo: 500 mm • Įrenginio svoris: 1200 kg • Gamybos numeris: 73965 Nauji pjovimo peiliai, tarpikliai ir centrifugos guoliai. Vandens talpos: švariam vandeniui 1x 2000L ir nešvariam vandeniui 1x 2000L, taip pat dumblo vežimėlis. Automatinis technologinio vandens papildymas.

Gamybos metai: 2003, Sąlyga: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Dksdjra Rr Espfx Af Tsh Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Sąlyga: labai geros būklės (naudotas), NNP juostinis maišytuvas Dksdstppn Aopfx Af Toh 300 kg talpos nerūdijančio plieno juostinis maišytuvas, 4 kW variklis, centrinės apatinės iškrovos durelės, apsauginis tinklelis ir dangtis, 3 fazių.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2008, mašinos/transporto priemonės numeris: LSP 100T, Gamybinė hidraulinė spaudė su H tipo stovu 100 t su vedimu Gamintojas: Stenhoj, Danija Pagaminimo metai: 2008 Dksdpfxjg Rn Efe Af Tjh Maksimali spaudimo jėga: 1 000 kN / 318 bar Presavimo cilindras, eiga: 400 mm Presavimo stalas su T formos grioveliu 1 500x900 mm viršuje 1 500x1 050 mm apačioje Stovo pravaža: 1 700 mm Būklė: kaip nauja, mašina naudota tik bandomiesiems paleidimams ir nuo to laiko saugoma sandėlyje. Visa informacija pateikiama be garantijos. Be transportavimo išlaidų.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2020, Pressure: 500 t Passage width: 1100 mm Stroke: 600 mm Approx. machine weight: 22.8 t Table size: 1100 x 800 mm Ram area: 1100 x 800 mm Installation height: 800 mm Hydraulics: 300 bar Closing speed: 60-200 mm/sec Pressing speed: 0 - 9.5 mm/sec Dedpeffamvofx Af Tokh Opening speed: 28-200 mm/sec Table height above floor: 900 mm Overall height above floor: 5100 mm Max. tool weight: 2000 kg Max. upper tool weight: 1000 kg Hall height: min. 6500 mm Number of press cylinders: 1 pc. Number of traverse cylinders: 2 pcs. Pump capacity: approx. 270 l/min Oil tank: 600 l Main motor: 75 kW Control technology by SIEMENS: S 7 Safety control: PILZ Multi

Sąlyga: naudotas, Gamybos metai: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table surface: 1200 x 815 mm Table height above floor: 800 mm Ram surface: 1100 x 700 mm Downward speed: from 48 mm/s Return speed: up to 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Dsdevzxphjpfx Af Tskh Weight: 23.0 t Space requirement approx. 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading/unloading in accordance with CE standards Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, front light curtain (Sick), and two-hand operation

Sąlyga: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0309, Press force: 200 t Table length: 2500 mm Table width: 2000 mm Maximum stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Return force: 25 t Machine weight approx. (without operating fluids): 50 t Column diameter: 210 mm Table swivel speed: 25 mm/sec Table extendable: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Advancing speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of press: 10,200 ? Perimeter maintenance balcony: 5,000 ? Ejector in table (capacity 30 tonnes, travel 250 mm): 4,000 ? Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Safety guard around work area: 1,500 ? Tabletop tiltable up to 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in center of ram: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Dksdsfxyi Dspfx Af Tsh Operation of the spotting press: Control functions: The control system features 'Manual' and 'Semi-Automatic' modes. In manual mode (joystick operation), the following can be performed: - The table can be extended and retracted hydraulically at up to 30 mm/sec. - The table can be hydraulically tilted at up to 25 mm/sec. to the set angle. - The ram plate can be hydraulically lowered, folded down by 90°, and extended up to 180°. - Operation without pressure is possible. - Pressure can be set via the monitor. - Speed can be adjusted between 1 and 10 mm/sec. - An additional hydraulic cylinder (core pull, etc.) on the tool can be controlled. In semi-automatic mode: - The ram can be moved in rapid traverse up to 10 mm/sec. - Previously entered programs can be processed via the monitor. - Example: - 30 t pressure - Upper stop 300 mm - Lower max. stop 900 mm - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm onwards limited to 10 mm/sec - Dwell time after reaching set pressure or BDC: 1 second - Return to upper stop Joystick function: The lever can be pulled (downstroke) or pushed (upstroke). The more it is actuated, the faster the machine operates. 1 to 10 mm/sec for downstroke, and 1 to 25 mm/sec for upstroke are possible. Monitor display: The large touchscreen monitor always shows the ram position, set pressure, and current speed. In semi-automatic mode, all cycle values are visible, can be saved, and reloaded as needed. The operator panel consists of two-hand control, joystick, emergency stop button, and selector switches for: - Extending/retracting the table (activates two-hand operation) - Tilting/leveling the table (activates two-hand operation) - Raising/lowering the ram (activates joystick) - Lowering/raising the ram plate (activates two-hand operation)

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, CNC lenkimo presas, 6 ašių - Presavimo jėga: 1300 kN - Lenkimo ilgis: 3060 mm - Ašių skaičius: 6 programuojamos (X1, X2, R1, R2, Z1, Z2) - Greitas Y judėjimas: 200 mm/s - Darbinis Y judėjimas: 11 mm/s - Grąžinimo Y judėjimas: 135 mm/s - Judėjimo greitis: X – 500 mm/s, R – 300 mm/s, Z – 1000 mm/s - X ašies eiga: 600 mm - Maks. X pozicionavimo sritis: 860 mm - R ašies eiga: 250 mm - Y ašies eiga: 365 mm - Montavimo aukštis: 535 mm - Y ašies pasvirimas: ±10 mm - Lenkimo ilgis: 3060 mm - Laisvas tarp stovo: 2690 mm - Išsikišimas: 410 mm - Stalo plotis: 120 mm - Darbinis aukštis: 1050 mm - Alyvos talpa: 250 l Matmenys: Plotis: 3640 mm, gylis: 2210 mm, aukštis: 2885 mm Dkedox S H Uxjpfx Af Tjh Svoris: 12 950 kg Mašiną galima apžiūrėti prijungtą prie elektros!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 150 583, bendras aukštis: 3 975 mm, hidraulinio cilindro reguliavimas: 125 mm, įrengimo aukštis: 410 mm, stalo aukštis: 1 220 mm, bendras plotis: 2 725 mm, bendras ilgis: 3 510 mm, stalo ilgis: 1 500 mm, stalo plotis: 1 200 mm, spaudimo jėga: 200 t, valdymo spintos aukštis: 2 200 mm, valdymo spintos ilgis: 340 mm, valdymo spintos plotis: 600 mm, įvesties srovės tipas: trifazis, tarpas tarp stulpų: 900 mm, atstumas tarp šoninių atramų: 900 mm, atstumas tarp stulpų: 1 520 mm, bendras svoris: 3 700 kg, paskutinio kapitalinio remonto metai: 2025, ATTENTION: The machine suffered transport damage and will undergo a complete mechanical and electrical overhaul before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Strokes per minute: 30 - 180 Tool installation height: 410 mm Dodpsw H Arvsfx Af Tokh Table dimensions: 1500 x 1200 mm (The press will be supplied with a new table plate, T-slot design selectable as requested) Ram dimensions: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, year of manufacture 2020