Periferinis įrenginys

FASI EV6

Būklė: naujas, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTED FEATURES: • Smart Controller Plus 7" touchscreen / Industry 4.0 compatible • Flow measurement, adjustable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-sub connector 20mA/TTY • Connection for external temperature sensor PT 100 for measuring and displaying tool temperature • Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers • High-performance pump, hydraulic parts in stainless steel (VA), magnetically coupled • Tool emptying via suction • Booster pump for unit filling at high temperatures Bdedpfoftm Hrox An Hoh • Filling via cooling water switchable to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are only met if listed in the order confirmation. This technical specification reflects the standard equipment. Customer requirements deviating from the standard will be specified in quotations or order confirmations.

Būklė: geras (naudotas), Gamybos metai: 2004, Peripheral devices Brand: Tool - Temp Bdodpfx Aoh Hbpwsn Heh Type: TT - 157E Available: 14 units

Gamybos metai: 1981, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can also be processed. The plant has been in operation until now and can be inspected at any time in Nuremberg. The plant consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to a maximum width of 330 mm Calender Total roll width: 1,200 mm Net roll width: 1,100 mm (max. film width) Haul-off unit and flying shear Bodeu Ttf Nopfx An Hodh

Būklė: beveik kaip naujas (parodų įrenginys), PFAFF 8320 - 111/101 ilgarankė versija su stalu Bdodpjxa D Hrefx An Heh

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8153336470, bendras svoris: 616 kg, tūrio srautas: 399 m³/val, slėgis (min.): 4 juosta, slėgis (maks.): 13 juosta, triukšmo lygis: 67 dB, aušinimo tipas: oras, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, We are a company specializing in the compressed air industry for over 20 years. The professional level of service and high-quality, market-proven products offered by our company guarantee a successful partnership with you. We offer a NEW Atlas Copco GA37VSDs FF screw compressor (variable speed, integrated dryer). The machine is equipped with a frequency inverter (variable speed drive) and utilizes the latest technology, resulting in higher efficiency and performance: - On average, 20% lower Specific Energy Requirement (SER) compared to previous GA VSD series models. - The eco-friendly, energy-efficient VSD+ variable speed drive system reduces energy consumption by up to 50% compared to fixed-speed models with idle running. - In addition to energy savings, Free Air Delivery (FAD) is increased by up to 12%. - High-efficiency fan motor (ERP 2015 compliant) reduces both energy usage and noise levels. - The advanced iPM motor delivers efficiency up to 94.5%, exceeding IE3 levels. Engineered to work hard for your success. Bjdpfxjwlp Hde An Hsdh The best-in-class oil-injected rotary screw compressor from the GA series delivers unrivaled performance, high productivity, and low maintenance costs—even in the toughest conditions. Technical data: - Capacity at 4 bar: 15.69–13.75 l/s / 0.94–7.85 m³/min - Capacity at 7 bar: 15.67–129.35 l/s / 0.94–7.76 m³/min - Capacity at 10 bar: 15.68–110.79 l/s / 0.94–6.65 m³/min - Maximum pressure: 10 bar (13 bar variant available on request) - Voltage: 400 V - Motor: 37 kW - Noise: 67 dB(A) - Weight: 616 kg - Internal permanent magnet motor (IPM) - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic condensate drain (zero loss of compressed air) - Elektronikon controller - Inlet valve - VSDs module - Manufacturer code: 8153336470 If you are unsure whether this equipment is right for you or cannot find a suitable compressor, CALL US! We will advise you on the proper equipment selection. Visit our complete offer for more information.

Būklė: naujas, *TECHNICAL SPECIFICATIONS: Heating capacity (hot circuit): 48 kW Heating capacity (cold circuit): 12 kW Cooling capacity (hot circuit): 42 kW Cooling capacity (cold circuit): 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *FEATURE HIGHLIGHTS: - PLC control system with touch screen - Heating via Incolloy stainless steel tubular heaters - Heating control via solid-state relays - IP54 switch cabinet with forced ventilation - Electrical wiring with terminal blocks - Volt-free input for cold/warm switching signal (front door) - Volt-free contact for collective alarm via 3-pole connector (front door) Bdsdpfx Aog Ey Ufsn Heh - Temperature control unit with heating and cooling circuits for connection to a valve station, enabling rapid switching between hot and cold circuits - Temperature-controlled supply of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and circulation system return - Separate automatic filling with dirt strainer - Flow measurement via differential pressure principle in both circuits - Monitoring of heater surface temperature via temperature sensors - System pressure regulation, required compressed air supply: 6 to 8 bar - Pressure booster pump type DS 360 for make-up water supply - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature probe PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification describes the standard equipment; customer requests deviating from the standard are specified in offers or order confirmations.

Būklė: naujas, Naujas įrenginys MASS International Kampinis transporterio konvejeris / juostinis konvejeris L formos konvejeris su fiksuotu 35° kampu Greitas pristatymas MASS International Kampinis konvejeris NC1 Fiksuoto kampo konvejeris su surinkimo plokštelėmis įkrovimo dalyje Pavyzdys kaip parodyta: NC 1 Įkrovimo dalis – 600 mm Kylanti dalis – 1300 mm Naudingoji juostos plotis – 250 mm Išorinis plotis – 305 mm (be variklio) Bsdohm Axgjpfx An Hodh Aukštis reguliuojamas, išleidimo aukštis 750–1050 mm Fiksuotas kampas tarp įkrovimo ir kylamosios dalies Nuolydis reguliuojamas Sklendžių aukštis – 30 mm Sklendžių atstumas – 500 mm Juostos greitis – 3 m/min Judantis su pasukamais stabdomais ratukais Papildomai: dar daugiau matmenų žr. standartiniame tiekimo sąraše matmenys pagal kliento pageidavimą FDA atitinkanti juosta pakeistas juostos greitis ir kt.

Gamybos metai: 2000, būklė: naudotas, Used filterless suction conveying unit Bodpfjdlpynex An Hsdh

Būklė: naujas, Gamybos metai: 2026, Preciziška vedimo ir traukos veleno tekinimo staklės Gamintojas: OPTIMUM Modelis: OPTiturn TZ 4 Art. Nr.: 3432240 Bdodpfegqw U Rsx An Hoh Būklė: Nauja staklė Atstumas nuo centro iki pagrindo: 200 mm Atstumas tarp centrų: 800 mm Sukimosi greitis: 45 - 1 800 aps./min (16 pakopų) Standartinė komplektacija: - 3 ašių skaitmeninis indikatorius DPA 32 - Fiksuotas centras MK 3 - Greitakeičiamas pjovimo laikiklis B dydžio - Tekinimo laikiklis BD - Redukcinė įvorė MK 6 / MK 3 - Stacionari atrama ø 10 - 130 mm - Judačioji atrama ø 10 - 100 mm - Aušinimo skysčio įranga - Ištraukiama drožlių dėžė - LED mašinos lempa - Eksploataciniai įrankiai

Būklė: naujas, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum External Volume: 50 l at 95°C *Hydraulic Functional Features: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring by magnetic float switch - Dirt filter in return flow and cooling water inlet - Reversing circuit for leak-stop operation - Manual tool drainage via leak-stop operation and actuation of a vent valve at the rear of the unit - Fill duration monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meter *Electrical Functional Features: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, located at the rear of the controller on terminal strip - Heater control via SSR - Control box IP54 - 20mA TTY interface; pin assignment Arburg - Cekon plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heater made of Incolloy - Device mounted on castors, two of which are steerable with brakes - Additional temperature safety for secure shutdown of the heater via heater circuit protector Bdodpfxsfnvvij An Heh *Cooling: Cooling capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: G3/8" female thread (Capacity based on 80°C flow temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Max. delivery rate: 40 l/min Max. delivery pressure: 3.8 bar Motor power: 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weight / Colors Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: housing: RAL 7035 light grey; front door: RAL 5015 sky blue *Connections: Circulating medium: G1/2" female thread Cooling water: G3/8" female thread Filling (option) *This device complies with European directives. Other directives and standards are only met if stated in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard are listed in offers or order confirmations.