FANUC CRX-20iA/L

FANUC CRX-20iA/L

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: R22X00F44, bendras svoris: 41 kg, keliamoji galia: 20 kg, rankos pasiekiamumas: 1 418 mm, Siūlome naują „FANUC CRX-20iA/L“ bendradarbiaujantį robotą – 20 kg / 1418 mm – pagamintas 2022 m. Parduodamas „FANUC CRX-20iA/L“ bendradarbiaujantis 6 ašių robotas, pagamintas 2022 m. spalio mėn. „CRX“ puikiai tinka lanksčioms automatizavimo užduotims, ypač išsiskiria 20 kg naudingąja apkrova ir 1418 mm veikimo spinduliu. Dėl bendradarbiaujančios konstrukcijos robotą – priklausomai nuo naudojimo ir rizikos įvertinimo – galima naudoti ir moderniose darbo vietose, kuriose dirba žmonės ir robotai. Gedpfezzkghex Apyjuh Techniniai duomenys Gamintojas: FANUC Tipas: CRX-20iA/L Pagaminimo metai / gamybos data: 2022 m. spalio mėn. Naudingoji apkrova: 20 kg Veikimo spindulys: 1418 mm Roboto svoris: 41 kg „FANUC“ tipas: A05B-1702-B212 Bendradarbiaujantis 6 ašių pramoninis robotas Kompaktiška konstrukcija Didelis veikimo spindulys ir didelė naudingoji apkrova Šiuo metu robotas sumontuotas ant mobiliojo aliuminio profilių pagrindo, todėl jį galima labai lanksčiai naudoti bandymams, demonstracijoms ar įvairioms gamybos užduotims. Kaip matyti nuotraukose, šiuo metu ant roboto taip pat sumontuotas pneumatinis siurbiamasis griebtuvas / rankavimo įrenginys. Esant poreikiui, galima susitarti dėl konkretaus tiekimo komplekto. Tipinės naudojimo galimybės „FANUC CRX-20iA/L“ tinka, be kita ko: Surinkimas ir padėjimas Įrenginių pakrovimas ir iškrovimas Palečių krovimas ir iškrovimas Detalių rankiavimas Surinkimo užduotys Pakuotės automatizavimas Patikros ir matavimo užduotys KLT, dėžių arba detalių rankiavimas Lanksčios gamybos ir automatizavimo užduotys „CRX“ ypač domina įmones, kurioms reikia lanksčių robotikos sprendimų, kuriuos būtų lengva integruoti į esamus procesus. Pasilieka teisę keisti kainas ir atlyginti už klaidas.

Būklė: naudotas, TECHNICAL DATA - Number of Axes: 7 MILLING SPINDLE - Tool Holder: HSK40 - Spindle Speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid Traverse Speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel Range: -20/+90 degrees - Minimum Resolution: 0.001 degrees TOOL CHANGER - Tool Changer Type: Parapluie (umbrella type) - Magazine Capacity: 40 tools TURNING SPINDLE - Spindle Speed: 8,000 rpm - Max. Bar Diameter: 32 mm - Minimum Resolution C-axis: 0.001 degrees - Travel Range: 360 degrees ELECTRICAL SUPPLY - Supply Voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1500 x 2600 mm - Machine Height: 2300 mm - Machine Weight: 2850 kg OPERATING HOURS EQUIPMENT Gjdpfx Apjuhbr Toyeuh - Control System: Siemens 840 D - 3-color Status Light

Būklė: naudotas, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Godocxxu Dspfx Apyjuh Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Būklė: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 5 TOOL HOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 [rpm] Godouhaycopfx Apyouh SECONDARY MACHINING UNIT - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Footprint: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3,500 [kg] MACHINE HOURS - Power-on hours: 46,571 [h] EQUIPMENT - Control: Fanuc - Driven tool motorization on: S2 - Driven guide bushing - Parts catcher - Parts ejector - Swarf conveyor: KNOLL - Coolant tank * with high-pressure pump: 100 [bar] - Bar feeder: TORNOS ROBOBAR SSF - Oil mist extraction: Elbaron - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by the buyer's qualified company.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras svoris: 250 kg, keliamoji galia: 25 kg, valdiklių gamintojas: Yaskawa, valdiklio modelis: YRC1000, teach pendant gamintojas: Yaskawa, Įranga: dokumentacija / vadovas, Pramoninis robotas YASKAWA GP 25 Valdymas YRC 1000 Šis robotas buvo naudojamas tik kaip demonstracinis robotas. Tik apie 600 darbo valandų. Paruoštas atsiėmimui. Guedpfx Apexb T Sysyoh

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg Godpfxsr A Hcbe Apyouh General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, X-axis: 620mm, Y-axis: 520mm, Z-axis: 460mm, B-axis: -50° to +110°, C-axis minimum increment: 0.001°, Distance spindle nose to table surface (B/C axes): 140–600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots (number/width/spacing): 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000 rpm, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feedrate: 1–10m/min, rapid traverse B/C axis: 25/min, tool holder: MAS BT-40, number of tool stations: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa/500l/min, coolant tank capacity: 420l, total connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, control operating hours: 9380h, machine-on: 9501h, program run: 3141h, hydraulics: 8371h, axes: 1863h, spindle S1: 2377h. Equipment: Roller guides in all 3 linear axes (Taiwan make), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air-conditioning for electric cabinet, chip conveyor (scraper type), chip bin, work area rinsing device, tailstock support for rotary table, roller guides in all 3 linear axes, CE compliant version, through-spindle coolant (IKZ), linear scales X/Y/Z Heidenhain, workpiece measuring probe, transformer, oil mist extraction, collision protection software, spindle thermal compensation, with documentation. On-site inspection possible. Godpfxozavyfs Apyouh

Būklė: naudotas, Gamybos metai: 2005, Turning diameter: 275 mm Turning length: 900 mm Control system: TRAUB TX8i Spindle bore: 65 mm Drive power, 100% duty cycle: 25.20 kW Drive power, 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds, stepless: 1 - 5,000 rpm Spindle diameter in front bearing: 110 mm C-axis: 1 - 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm Gjdpfxsw E Nnbe Apyjuh B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Max. hexagon: 45 mm Total power requirement: 95.00 kW Machine weight approx.: 16.00 t Installation dimensions approx.: 10.00 x 3.50 x H3.00 m Equipped with TRAUB TX 8i control, main and counter spindle with C-axis, 3 turret tool carriers, 1 vertical tool carrier with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package The machine can be inspected under power.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN3128158, sukimosi skersmuo virš skersinio stumduko: 533 mm, tekėjimo ilgis: 572 mm, veleno skylė: 63 mm, veleno greitis (maks.): 4 000 aps./min, Nauja būklė + įrankiai + strypų padavėjas Godpfx Apevwz T Ueyouh

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum resolution C-axis: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] - Minimum resolution C-axis: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Floor space required: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE OPERATING HOURS - Power-on hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT / ACCESSORIES - CNC control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter Gedpsypxqrsfx Apyouh - Chip conveyor - Parts removal - Slat band conveyor - Bar feeder interface fitted