Valdymo blokas

Fanuc 31 driver cards complete all cards fanuc 5 pcs

Sąlyga: geras (naudotas), Gamybos metai: 2015, Stroji je v dobrem stanju, deli, ki so prikazani ročno, niso vključeni. X 1025 mm Y 560 mm Z 600 mm Hjdpfx Aewx N Nfjf Ijfb Heidenhain TNC 620, 16.000 min⁻¹ HSK 63

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Hfodpfx Afev Az Uco Ijb Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Hsdpfx Aevgxfysf Isfb Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Through-spindle coolant Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is delivered with many tools

Sąlyga: naudotas, Gamybos metai: 1964, A3 formato spaudos staklės su HAKRO karštos folijos įspaudų įrenginiu, greitai prieinamas Hjdpfx Aexvcquef Iefb

Sąlyga: geras (naudotas), Gamybos metai: 2002, HEIDENHAIN TNC 430 control Spindle speed: 20 – 9,000 rpm Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface: Ø 700 x 500 mm Hfsdpfx Aowglfxjf Iob Max. table load: 200 kg Infrared probe for workpiece measurement

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Hsdst E Dbyspfx Af Iefb Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m Hsdpfxjrw Dkns Af Isfb The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each.

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 540 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 20 m/min, X ašies padavimo greitis: 16 m/min, Y ašies padavimo greitis: 16 m/min, padavimo greitis Z ašis: 16 m/min, nominali (akivaizdi) galia: 16 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: ITNC 530, stalo apkrova: 800 kg, bendras svoris: 5 300 kg, veleno greitis (min.): 10 000 aps./min, veleno veikimo valandos: 8 500 h, ašies variklio galia: 12 W, veleno nosis: ISO B40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 24, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Hsdpfxowxrgto Af Ijfb Video available upon request. Delivery and installation possible by our team.

Sąlyga: naudotas, Gamybos metai: 2001, Tekinimo ilgis 470 mm Maks. tekinimo skersmuo 390 mm Veleno apsisukimai 3500 aps./min. Judėjimai X/Z – 235/520 mm Stotelių skaičius revolverinėje galvoje 12 vnt. Valdymas: MSG 500 Priedai: Hfjdpsxdfi Nefx Af Isb Įvairūs įrankių laikikliai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 540 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 20 m/min, bendras aukštis: 2 720 mm, bendras ilgis: 3 160 mm, bendras plotis: 2 240 mm, For sale: 3-axis CNC milling machine, brand Mikron, model VCE 600 Pro. Hsdsxnprvspfx Af Iefb The machine is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis: 600 mm Y-axis: 500 mm Z-axis: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions (LxWxH): 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, internal extraction, through-spindle coolant system, hand control unit, coolant spray gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Optional: Transport and loading can be organized Europe-wide for an additional charge. All prices plus VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING & SELLING PRODUCTION & METALWORKING MACHINERY Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For further information or contact options, please visit our website.