Šildymo sistema

Ewi-Therm Optimal-E 0, 34kW

Gamybos metai: 2021, būklė: naujas, mašinos/transporto priemonės numeris: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm horizontal + 2200mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU, petrol matt finish Belt width: 500mm 21 pcs. T30 cleats welded on, pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger joint Nsdpfx Aoh Eld Ejn Isct 40mm corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Full-surface support plate Drive: Motor approx. 1.1kW Belt speed: approx. 0.4 m/sec * Optionally controllable with frequency inverter Connection: 220/400V, 50Hz, protection class IP54

Būklė: naujas, Gamybos metai: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with fireclay For rooms up to: 4,800 m³ (according to DIN) Fuel types: firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 40 - 50 kg/h Blower air output (free-blowing): 14,000 m³/h Outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 2,150 kg SPS control cabinet: 380 Volts Ncodpfx Anodlhdbs Iot

Būklė: naujas, Gamybos metai: 2026, Construction size: 5 Nominal heat output: 145 kW -- Compliant with BImSchV Stage 2 and CE certification -- Combustion chamber fully lined with fireclay Nodpfxsdlhcre An Isct For spaces up to: 3,800 m³ (according to DIN standard) Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 35 - 40 kg/h Blower air output (free-blowing): 9,400 m³/h Outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 Volt

Būklė: naujas, Hopper opening: 2,500 x 2,000 mm Ncodpfxjbq St Ho An Iot Rotors: 2 units Rotor swing diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen door locking for tramp material ejection Weight: approx. 18,500 kg

Būklė: naujas, Gamybos metai: 2026, Construction size: 3 Nominal thermal output: 87 kW Nedpfsdlhbpox An Ijct -- BImSchV Level 2 and CE compliant -- Combustion chamber fully lined with fireclay For rooms up to: 2,200 m³ (according to DIN) Fuel type: firewood, chipboard, wood chips, briquettes Fuel consumption: 25 - 30 kg/h Fan air output, free-blowing: 6,000 m³/h Blow-out opening: Ø 500 mm Flue pipe connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 Volt

Būklė: naudotas, Gamybos metai: 2017, Stalo matmenys: 2700 x 900 mm. HSK 63 F laikiklis. 2 x velenai, skirti HSK 63 F laikikliui (30 + 40 mm). Veleno nuolydžio reguliavimas: -45° iki +45°. Naudojama veleno ilgis: 180 mm. Sukimosi kryptis į dešinę ir į kairę. 4 volelių padavimas su varikliniu aukščio ir pločio reguliavimu bei pneumatiniu fiksavimu. 7,5 kW stabdžių variklis su elektroniniu inverteriu. CNC valdymas šiems parametrams: - veleno nuolydžio reguliavimas, - veleno aukščio reguliavimas, - visiško atmušimo reguliavimas, - priekinės atmušimo dalies judėjimas, - stalo padėtis prieš veleną, - elektroninis, laipsniškas apsukų reguliavimas 1.000 – 10.000 aps./min. - Aigner frezavimo atmušimas su aliumininiais grioveliais, - jutiklinis ekranas su grafikos funkcija, - Windows operacinė sistema, - kamera įrankių ir profilių nuotraukų importui, - visiškas atmušimo nuėmimas į šoną, - automatinis žvaigždės-trikampio paleidimas, - centrinė tepimo sistema. Svoris apie 1360 kg. Sandėlio vieta: Nattheim. Ncjdjyudidopfx An Iot

Būklė: naudotas, Gamybos metai: 2007, VIENAAŠIS SMULKINTUVAS WEIMA MODELIS WLK15 PAGRINDINIS VARIKLIS 90 KW ROTORIAUS PEILIŲ DYDIS 50X50 (NAUJI PEILIAI) ROTORIAUS ILGIS 1500 MM ROTORIAUS SKERSMUO 370 MM ĮRENGINYS 100% VEIKIANTIS Nsdpjtqdxfofx An Ijct PARUOŠTAS DARBUI

Būklė: naujas, Gamybos metai: 2026, Construction size: 4 Rated heat output: 116 kW -- BImSchV Stage 2 and CE compliant -- Combustion chamber fully lined with fireclay For spaces up to: 2,900 m³ (according to DIN) Ncedpfxodlhcde An Ijt Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 30 - 35 kg/h Blower air capacity, free blowing: 7,500 m³/h Outlet opening: Ø 600 mm Flue pipe connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 Volt

Būklė: naudotas, Hidraulinė horizontali ryšulių presas Tränklein BP/Hydraulic horizontal bunch press Tränklein BP Presavimo slėgis bepakopė reguliacija / Pressure steplessly adjustable: 0 – 2.500 kg Maksimali įvesties ilgis / Infeed length max: 770 mm Presavimo plokštės dydis / Press plate size: 290 x 220 mm Nedpfx Asiwg A Een Ijct Galima atlikti vaizdo patikrą internetu per Skype vaizdo pokalbį. Maloniai kviečiame apsilankyti – sandėlyje turime daugiau įrenginių. Galima pristatyti nedelsiant – įrenginį galima apžiūrėti vietoje. Sandėliuojama Emskirchene / Niurnberge – galima išbandyti.

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, ilgio ribotuvas: 3 200 mm, įrankio skersmuo: 400 mm, ašies skersmuo: 50 mm, spindelio eiga: 640 mm, veleno greitis (maks.): 3 000 aps./min, frezos veleno ilgis: 320 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: Oro kondicionierius, darbinio aukščio: 130 mm, darbinis plotis: 200 mm, SCM Windor 60/100 – Angular Machining Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System This production line is a window and door manufacturing system of the Windor 60/100 type by SCM Group, year 2005. It is a CNC-controlled angular machining centre designed for the industrial processing of frame and sash components. The system is built for serial production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angular Machining Centre The SCM Windor 60/100 features a modular build and is designed as an angular processing line. Machining is carried out on a tenoning side and a profiling side arranged at right angles to each other. Multiple machining steps such as milling, drilling, grooving, rebating, and tenoning are executed in a seamless CNC-controlled process. Key Features: * CNC multi-sided processing * Multiple milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and is used for precise drilling operations for joints and fittings. The drilling is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profiling milling operations and consists of two processing sides: Right Side: * Lifting spindle with adjustable height * For variable profile and contour machining Left Side: * 24-position tool changer * Automatic tool change to minimise set-up times * Suitable for complex profile milling 2.4 Löwer Surface Grinding Machine A surface grinding machine from Löwer is integrated into the line. This machine is exclusively used for surface grinding to improve the surface quality of the machined parts. 3. Control, Operation and Safety The system is equipped with CNC control managing all machining processes, tool changes, and feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are compliant with the state of the art at the time of construction (2005) and include in particular: Ncodsx Nqqxopfx An Iot * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL 10-Spindle Planer An extension of the existing machine park is planned with the installation of an SCM Topset XL 10-spindle planer. The machine operates as a standalone work station at a separate location within the production hall and is not directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07.01.2026