Masės balansavimo įtaisas creel

EWD Esterer MAS

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Lajdpfx Aou Uh T Dofkei Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naudotas, WRAVOR WRC 1050 AC – Galia, natanumas ir patikimumas medienos apdirbime Ieškote juostinio pjūklo, kuris derina galią, tikslumą ir efektyvumą? WRAVOR WRC 1050 AC suteikia visa tai – ir dar daugiau! Šis horizontalus juostinis pjūklas sukurtas profesionaliems medienos apdirbėjams, bet yra patikimas ir universalus sprendimas net ir mažesnėms dirbtuvėms. _____ Svarbiausi privalumai: Aukštas efektyvumas: Išskirtinis našumas – pjovimo pajėgumas iki 30 m³ per 8 valandų pamainą, minimali energijos sąnauda ir nedidelės priežiūros išlaidos. Tikslus pjovimas: Dėl pažangios technologijos ir stabilios konstrukcijos WRAVOR WRC 1050 AC užtikrina švarius, tikslius pjūvius – net ir apdorojant sudėtingiausias medienos rūšis. Paprastas valdymas: Intuityvūs valdikliai, greitas įrengimas ir lengvas reguliavimas šį pjūklą paverčia idealiu tiek pramonės įmonėms, tiek individualiems meistrams. Universalumas ir ilgaamžiškumas: Pagaminta iš aukštos kokybės medžiagų, ši mašina geba apdoroti įvairias medžio rūšis – nuo minkštos iki kietos, masyvo ar kompozito. Išmani technologija: Inovatyvi valdymo sistema automatiškai prisitaiko prie skirtingų darbo sąlygų, taupo laiką ir resursus. Laedpfx Aowfq Naefksi Ekologiškas ir energiją taupantis: Mažos energijos sąnaudos leidžia sumažinti eksploatacines išlaidas ir prisideda prie aplinkos tausojimo. _____ Techninės specifikacijos: • Modelis: WRC 1050 AC • Variklio galia: 30 / 37 / 45 kW • Pjovimo našumas: iki 30 m³ / 8 val. • Didžiausias rąsto skersmuo: Ø 1050 mm • Pritaikymas: pramoninis medienos apdirbimas, staliaus darbai, padėklų, sijų, masyvo ir kitų gaminių pjovimas _____ WRAVOR WRC 1050 AC – Jūsų partneris kiekviename pjūvyje! Daugiau informacijos ar kainos pasiūlymą gaukite susisiekę su mumis šiandien.

Sąlyga: naudotas, Complete sawmill, currently only available for sale as a whole. Reservations for individual components are possible at any time. Laodpfx Afswptuyjksi The sawmill consists of: 01. Log infeed, 3-strand, Mayrhofer – with singulator – with feeder – Total length: 8 meters – Width: 3.5 meters 02. Fully hydraulic carriage by Mayrhofer – with auxiliary carriage – with rails – Track gauge: 90 cm 03. Frame saw Pini & Kay FN65 HH – Passage width: 650 mm – Drive motor: 33 kW – with saw blades – with hanger – with transmission – with splitting wedge – with chip scraper conveyor 04. Frame saw roller conveyor with 3 draggers and steep conveyor – Length: 8.5 meters – Width: 1.8 meters – Roller width: 1.6 meters 05. Drag table, 4-strand – Length: 4.5 meters – Width: 2 meters 06. Steep conveyor, 4-strand – Conveyor length: 3.6 meters – Width: 3.8 meters 07. Double edger Paul KME 2 – Zero line left – Right-hand machine – Drive motor: 22 kW – with 2 under-table cross-cut saws – with hydraulic roller lifting – with hydraulic width adjustment – with stripper separator – with drag table / cross conveyor for trimmings – with main product hoist – with conveyor belt – with spiral roller conveyor – with manual box sorting (10 boxes/trollies) 08. Sharpening room consisting of: – Gang saw sharpening machine Vollmer CNHV (1978) – Set device Loroch SGB 6 (1983) 09. Dry kiln Vanicek – Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m – External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Sąlyga: naujas, Gamybos metai: 2024, Custom-built paternoster stacking systems available in various technical designs for sawn timber lengths from 3.0 to 6.0 m (other lengths on request) Lajdpfxor Nx Tms Afkoi Options: • With or without lath bundling (various versions available, depending on requirements) • With or without lath magazine; single or double chamber options, depending on requirements, equipped with pneumatic gripper • Infeed and outfeed solutions tailored to customer specifications

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2022, Parduodama pilna BSH gamybos linija. Įrenginį sudaro System TM tiekimo sistemos, Keilzinken Technik NKT, HIT automatizacija (daugiapakopis sandėliavimas, transportas, lamelių tiekimo remonto stotis, obliavimas ir Kallesoe ir kt.). REX obliavimo staklės: priešoblius, lamelių oblius ir finišo oblius. Aukšto dažnio presas iš Kallesoe. 2 silosai. Lsdjwgcchspfx Afksai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 14 900 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 33 000 kg, galia: 264 kW (358,94 AG), sukimosi greitis (min.): 70 aps./min, įėjimo įtampa: 400 V, Slow-running, robust single-shaft shredder Suitable for the pre-shredding of a wide range of materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or compacted in bales. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: As requested by the customer (mm) Control cabinet: complete (with ABB frequency inverter) Working opening: 2135 x 1750 mm Lasdpjv S Hyvsfx Afkji Feed volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 87 rpm (at 50 Hz) Number of rotor blades: 84 pcs Blade dimensions: 172 x 57 x 28 mm Counter knives (bottom): 6 pcs Scraper comb (top): 6 pcs Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions (LxWxH): 5500 x 3050 x 3100 mm, with hopper H=4880 mm Delivery time: immediately Two discharge conveyors available as an option.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Four-side beam planer Lajdpjthmifefx Afkei working dimensions: 450x300 mm complete with automatic chamfering units motorized height and width adjustment Tersa planer heads No. 4 motors, 15 kW each No. 2 roller conveyors, L=6000 mm CE certified machine with new soundproof cabin

Gamybos metai: 1992, Sąlyga: geras (naudotas), Overhead crane, crane, electric wire rope hoist, hoisting unit, motorised winch, motor winch, chain hoist, traction winch, pulley block Ledpfx Afjl Tuvdjksai - Manufacturer: Stahl, crane trolley with electric wire rope hoist - Crane trolley: Type GO 24 20 16 - Travel speed: 20 m/min - Wheelbase: 800 mm - Wire rope hoist: Type AS 2010 - Pulling force: 1000 kg / Lifting capacity 4000 kg - Drum speed: 16 m/min / Lifting speed 4 m/min - Lifting height: mm - Transport dimensions: 1250/1180/H400 mm - Dead weight: 356 kg

Sąlyga: naudotas, rida: 835 837 km, galia: 309 kW (420,12 AG), pirmoji registracija: 11/2010, bendras svoris: 26 000 kg, kuro tipas: dyzelinas, spalva: geltonas, ašių konfigūracija: 6x2, didžiausias leistinas svoris: 16 420 kg, tuščias svoris: 9 580 kg, padangos dydis: 315/80R22.5, kuras: dyzelinas, ratų bazė: 4 800 mm, stabdžiai: intarder, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: kitas, Gamybos metai: 2010, bendras ilgis: 9 480 mm, sėdimų vietų skaičius: 2, statybinis aukštis: 3 850 mm, lovų skaičius: 1, Įranga: ABS, borto kompiuteris, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, trauki kontrolė,

Sąlyga: geras (naudotas), galia: 122 kW (165,87 AG), bendras svoris: 27 000 kg, Gamybos metai: 2001, veikimo valandos: 21 200 h, For sale is a Sennebogen 825 Year of manufacture: 2001 Operating hours: 21,200 Ledpfxjua At No Afksai Gross weight: 27,000 kg