EUROPA automatinis 4 ritinėlių padavimo įrenginys

EUROPA

Sąlyga: naujas, Press force: 150Motor: 15Installation height: 500Stroke length (max.): 400Table size: 900 x 600Ram area: 900 x 600Table height: 850Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200Weight approx.: 8000Oil fill: 400Hydraulic C-frame Press General Information: Design: C-frame construction, hydraulic Pressing force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paint: RAL 7035 – Light gray Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic operation (single stroke) with light sensor PLC control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measuring system: Linear scale (500 mm) Touchscreen: 9'' Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external connection (e.g., robot, coil system) Workspace lighting (double) Hydraulic System: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 cm³, 65 l/min – REXROTH Auxiliary pump: present Tank capacity: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram lock (top dead center position) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table plate) Stroke length: 400 mm Insertion depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top edge of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welds) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Bodpfxewzzzfs Abfecu Pressure & speed settings via PLC Swiveling operator panel Mobile two-hand operation SICK light sensors Stroke measuring system Display: 9'' Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding to the rear) Operating manual & parts list (German), incl. maintenance plan

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0153, Specifikacija Europa VS660 Centras aukštis: 330 mm Atstumas tarp centrų: 1500 mm Sūpavimas virš lygiavimosi staklės: 660 mm Sūpavimas virš skersinio stalo: 430 mm Veleno pragręžos skersmuo (maks. strypo skersmuo): 104 mm Bsdpenxi H Uofx Abfscu Veleno nosies tvirtinimas: D1-11 Camlock Veleno gręžos kūgis: No. 7 Morse Sūpavimas per tarpelį: 860 mm Staklės bėgių plotis: 480 mm Skersinio stalo eiga: 390 mm Viršutinio stalo eiga: 190 mm Galvietės slankiklio eiga: 300 mm Veleno apsukos (be pakopų): 18–1400 rpm Pavara: trapeciniai diržai ir sankabos Veleno variklis: 20 AG Colinės sriegio žingsniai (73): 2–84 TPI Diametraliniai žingsniai (27): 8–72 DP Metrinės sriegiai (51): 0,2–14 mm Moduliniai žingsniai (20): 0,2–3,5 MOD Svoris apytikriai: 3800 kg Staklės su coliniu valdymu Europa VS660 centrinio tarpo staklės sandėlyje JK. Staklės komplektuojamos su: Fagor 2 ašių DRO sistema su CSS (metrinė ir colinė parodymų galimybė) 3-žandų griebtuvas Greitpakeičiama įrankių galvutė ir laikikliai Automatinis išilginis stalo pastūma Apšvietimas Aušinimo sistema Griebtuvo apsauga Galinis purslų skydas

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, alyvos bako talpa: 3 100 l, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data - Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Type: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours as of December 2025 Main press force: 200 t Specific pressing force: 16.5 kg/cm² Feed chute dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bjdpfx Aox Dnb Uebfecu Bale dimensions: 1,100 x 1,100 mm, length adjustable Drive power: 2 x 75 kW Binding: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank capacity: 3,100 L Machine weight, press: approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic schematic Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank completely drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, complete disassembly, overhaul of the mechanics • Replacement of the front two main guide rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, all seals replaced • Replacement of the counter knife in the frame • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame renewed on left and right sides • Worn press floor cut out, bottom plate replaced with wear-resistant HARDOX steel • Dismantling of the tying and twisting unit, complete disassembly, overhaul of the mechanics, replacement of all twister shafts and ball bearings • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and reset, chains lubricated and tensioned • All wire deflection pulleys made operational • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in both manual and automatic modes—see our video for a functional test of the machine. The documentation (operator manual, CE, electrical/hydraulic schematic) is complete. Viewing by appointment is possible. No liability is assumed for the technical specifications or possible errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Europa Centurion CU5 Ram-Kopf-Fräsmaschine (ähnlich Huron) Bsdpevm Abrefx Abfocu Ausgezeichneter Zustand – eine Besichtigung ist jederzeit willkommen! Baujahr: 1997 Technische Daten – Tischgröße: 1635 x 460 mm Anzahl T-Nuten: 5 Breite der T-Nuten: 18 mm Abstand zwischen den Nuten: 80 mm Längsverfahrweg: 1300 mm Vertikalverfahrweg (Knie): 440 mm Querweg (Ram): 650 mm Mindestabstand Spindelkopf zur Tischoberfläche: 40 mm Spindelaufnahme: 50 INT Anzahl Spindeldrehzahlen: 27 Drehzahlbereich Spindel: 30–2050 min⁻¹ Längsvorschub: 10–1000 mm/min Quervorschub: 10–1000 mm/min Vertikalvorschub: 5–500 mm/min Längs Eilgang: 2800 mm/min Quer Eilgang: 2800 mm/min Vertikaler Eilgang: 1400 mm/min Spindelmotor: 7,5 kW Maximale Tischbelastung: 1800 kg Abmessungen – Länge 2010 mm x Breite 2621 mm x Höhe 1950 mm

Sąlyga: geras (naudotas), D&K Europa System B2 laminatorius Įrenginys visiškai veikiantis ir paruoštas darbui. Ši pažangi, aukštos našumo mašina idealiai tinka komerciniam laminavimui. Techninės specifikacijos: Maks. lapo dydis: 540 mm x 740 mm Min. lapo dydis: 210 mm x 220 mm Min. popieriaus svoris: 115 g/m² Maks. popieriaus svoris: 400 g/m² Darbinė temperatūra: 80-145°C Svoris: 750 kg 380 V elektros tiekimas Bedpex N I Tqjfx Abfscu Chromuoto plieno cilindras Pneumatinis prispaudimas, atskyrimas ir automatinis didelės talpos padavimas. Lapo padavimo tikslumas: ±2,0 mm Valdymo jutiklinis ekranas patogiam naudojimui. Lapo tiesinimo modulis. Lapo išvesties joggeris.

Sąlyga: naujas, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram area: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil filling: 200Control / Key switch: 1. Setup mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (at full speed) with light sensor Bcedem Nntyopfx Abfju Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guide: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design available) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table plate) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Prefill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting the stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2-fold workspace illumination 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With lateral safety door (doors can be slid to the rear)

Sąlyga: naujas, Pressure: 60Motor: 11Installation height: 450Stroke length (max.): 400Table size: 600 x 500 x 80Ram surface: 600 x 500 x 90Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,700Weight approx.: 4,000Oil capacity: 200Control / Key switch: 1. Setup mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (full speed) with light sensor Main cylinder: Ø 150mm Auxiliary cylinders: 2 pcs Ø 60 x 40mm Guide rods: 2 pcs Ø 40mm Motor: 7.5 kW – 11 hp (IE-3) Pump: 18cc – 26 liters / ASC Speed: Advance 110 mm/sec – Return 120 mm/sec – Pressure: 11 mm – 5/sec Installation height: 500mm Stroke length: 400mm Table plate: 600 x 500 x 80mm (with T-slots) Ram plate: 600 x 500 x 90mm (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (10 – 60 tons) Speed adjustable via PLC Bcodpfx Aemmuq Iebfju Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for stroke length adjustment 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Dual work area lighting 8 free I/O on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors slide to the rear)

Sąlyga: naujas, Pressure: 100 Motor: 11 Installation height: 500 Stroke length (max.): 400 Ram adjustment: 790 x 600 Table height: Floor to top edge of table - 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mm Weight approx.: 5,500 kg Oil fill: 200 DEMONSTRATION MACHINE Year of manufacture: 2023 Type: Hydraulic C-frame press Capacity: 100 tons at 230 bar Control / Key switch modes: Setup mode – Manual, without light curtain Automatic mode – Full speed with light curtain Hydraulic system: Main cylinder: Ø 230 mm Auxiliary cylinders: 2 pcs., Ø 50 x 30 mm Auxiliary guides: 2 pcs., Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressing phase: 9 mm/sec Machine dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top edge of table) Hydraulic accessories: Hydraulic control block & components from REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control accessories: Siemens S7-1200 control Main control cabinet Safety PLC from SICK Light curtains from SICK (700 mm) Linear scale for stroke adjustment 10" touchscreen from BEIJER (German & English) Mobile two-hand control Ethernet interface for remote maintenance Bcjdpfjwrkctox Abfsu Fault indicator with light and sound signal Double work area lighting Side safety doors (foldable outwards) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Compliant with current machinery directives EN 693 Oil volume: 220 liters (tank capacity: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1300 x 2000 x 2750 mm Painting: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Inspection with power on available at our site in Böheimkirchen 3071 (Neustiftgasse 34).

Sąlyga: naujas, Pressure: 125 | Motor: 22 | Installation height: 500 mm | Max. stroke length: 400 mm | Table size: 800 x 600 x 120 mm | Ram surface: 800 x 600 x 300 mm | Table height: 850 mm | Dimensions (LxWxH): 1,600 x 2,000 x 3,200 mm | Weight approx.: 7,000 kg | Oil capacity: 400 L Control / Key switch: 1. Setup mode: Manual, without light sensor (max. 10 mm/sec) 2. Automatic mode: Full speed with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm – (with T-slots; configuration according to customer request possible) Ram plate: 800 x 600 x 300 mm – (with T-slots & ribbed welding) Table height: 850 mm (floor to top edge of table plate) ----- Hydraulics Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Bcjdsmr Hpcopfx Abfou Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for stroke length adjustment 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm for malfunctions (visual & audible) Dual work area lighting 8 free I/O on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operation manual & parts list (German) With side safety door (doors can be shifted backwards)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2024, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed hopper dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Nominal throughput: 750 m³/h Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Wire tying: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/h, material dependent Hydraulic tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale. A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts. Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Loading belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Overall length: 21,271 mm Bjdpfx Aju Th D Robfscu Incline: 32° Usable width: 1,644 mm Drive shaft height above floor: 5,777 mm Side wall height, loading belt: 500 mm Side wall height, incline belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available. Scope of supply: - 1 unit chain belt conveyor, Wagensfeld B.V. - 1 unit feed hopper with pre-compactor flaps - 1 unit agitator - 1 unit MACPRESSE baler, type 111A - 2 units wire feed racks with wire spool holders, without wire - 1 unit operating manual with CE declaration, electrical and hydraulic schematics