Perforatorių kramtymo mašina

Ermak RPP 1270 x 30

Būklė: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 899 h, mašinos/transporto priemonės numeris: SN20090545, perforavimo jėga: 30 t, maks. lakšto storis: 6 mm, stalo ilgis: 2 000 mm, stalo plotis: 1 270 mm, bendras svoris: 11 000 kg, darbo diapazonas: 40 mm, ERMAK RPP 1270x30T Punching Machine Year 2009 Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main features: Operating hours: - POWER ON hours: 899 hours - Punching hours: 1 hour 6 minutes - Punching force: 30 tons - Maximum capacity: - Sheet thickness: 6 mm - Sheet dimensions: 1270 mm (width) x 2000 mm (length) - Stroke: 40 mm - Axis travel: - X-axis: 2000 mm - Y-axis: 1270 mm - Travel speed: - X-axis: 70 m/min - Y-axis: 70 m/min - C-axis speed: 100 rpm - Strokes per minute: Up to 700 - Accuracy: - Positioning: ±0.03 mm - Position tolerance: ±0.1 mm - CNC control: GE Fanuc 18i-PB - Oil capacity: 300 liters - Power: 15KW Bedpfov S Ufysx Ai Rewn - Machine dimensions: - Length: 4,250 mm - Width: 4,000 mm - Height: 2,330 mm - Weight: 11,000 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Bwjdpfx Aisuiy Nyj Rsn Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Bwedpfxscxxx Rj Ai Ron Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Gamybos metai: 1971, būklė: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Bodpfx Aod Ha E Ssi Rewn Strip Width: 1,200 mm Strip Thickness: 0.3 – 5 mm Coil Weight: 10 t Mandrel Ø: 508 mm

Būklė: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm Bwjdpfx Asbn Amfei Rsn 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: Bedpfx Aisvf E Avj Rswn The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2000, veikimo valandos: 25 000 h, X ašies eiga: 10 300 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 800 mm, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, frezos galvos padėtis: 2.5 x 2.5 °, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 60 aps./min, stalo plotis: 3 300 mm, stalo ilgis: 12 000 mm, tvirtinimo skersmuo: 50 mm, bendras aukštis: 48 750 mm, bendras plotis: 100 000 mm, bendras ilgis: 212 000 mm, bendras svoris: 100 000 kg, Duplexfräsen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann mit zwei Spindeln gleichzeitig bearbeitet werden. Produktionssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Steigerung der Teilegenauigkeit, da die Bearbeitung des Werkstücks in den meisten Fällen in nur einer Aufspannung erfolgen kann Bedienung durch nur einen einzigen Maschinenführer möglich Reduzierter Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation durch hohe Produktivität Duplex-Lösungen ermöglichen unterschiedliche Konfigurationen: einzelner Arbeitsbereich oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern folgender Hersteller: CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Bwodpfx Aerx Rxtoi Ron Technische Daten: X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 – 3.000 U/min Spindelaufnahme: 50 ISO/BT/MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf mit automatischer Indexierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 2 500 aps./min, stalo ilgis: 790 mm, stalo plotis: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle stroke 90 mm Spindle taper ISO 40 Bsdpfx Aiewffyms Rjwn Spindle speeds 50 - 2,500 rpm

Būklė: naudotas, Gamybos metai: 1990, I-beam – flat 140 x 140 x 13 mm I-beam – upright 120 x 120 x 13 mm Angle steel 130 x 130 x 12 mm Round steel 85 mm Bending capacity – flat bar 125 x 25 mm Bjdpfx Aijtt Ecds Rjwn Flat bar on edge 65 x 65 mm Including various rollers: Tube diameters: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203 mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Būklė: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Bwodofn Aqmspfx Ai Rjn Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.