Pusė portalo 22 tonų / 2x16 tonų. Beveik kaip naujas

DCB

Gamybos metai: 1990, būklė: geras (naudotas), Coil weight: max. 15 t Dodpolimuhofx Ac Dsur Coil Ø, outside: max. 1,800 mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post Duodpfxov Ab Dqe Ac Dor - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control

Gamybos metai: 1990, būklė: geras (naudotas), Coil weight: max. 15 t Dujdjbibu Tjpfx Ac Djr Coil Ø, outside: max. 1,800 mm

Būklė: naudotas, Gamybos metai: 2014, veikimo valandos: 87 419 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 450 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 330 mm, veleno greitis (maks.): 18 000 aps./min, veleno greitis (min.): 20 aps./min, įėjimo įtampa: 400 V, valdiklių gamintojas: Siemens 840d sl Operate, ašies skaičius: 1, sukamosios stalo skersmuo: 320 mm, veleno nosis: HSK-A 63, įrankio skersmuo: 125 mm, įrankio ilgis: 250 mm, įrankio svoris: 8 000 g, veleno veikimo valandos: 20 657 h, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C22U 5 ašių apdirbimo centras Siemens 840D sl Operate 55 įrankių vietų HSK-A63 NC pakreipiamas apskrito stalas SRT320 mm Sraigtinis pavara C ašiai Vienpusė pavara A ašiai Standartinė aušinimo sistema be vidinio įrankio aušinimo (be IKZ) Grandinės drožlių transporterio gale Išorinė pūtimo oro sistema Pūtimo oras per veleno centrą Drožlių plovimo pistoletas Alyvos dulkių ištraukimas su papildomu filtru Automatinės kabinos durys Dujdpfx Aoxxg D Roc Dor Rankinis kabinos stogas Elektrinė temperatūros kompensacija Siemens Matavimo jutiklis Heidenhain

Būklė: naujas, Gamybos metai: 2025, The automatic basket cleaning system XTON Smart Cleaner SC1000™ is made of stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA liquid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed-loop circuit at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ offers high cleaning quality, saves time and energy, and ensures safe and convenient operation. The cleaning unit is designed for the automatic removal of contaminants from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - Exterior dimensions – Open chamber (W x D x H): 150 x 120 x 250 cm Duedou R Urhspfx Ac Dor - Exterior dimensions – Closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW - Tank capacity: 300 L - Tank volume to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, perforavimo jėga: 18 t, darbo diapazonas: 30 001 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 600 mm, Parduodama labai gerai prižiūrėta ir visiškai aptarnauta naudota didelio formato Trumpf 3000 CNC štampavimo staklės Gamintojas: TRUMPF Modelis: TruPunch 3000 (S11) Metai: 2012-11 Darbinis plotas: 3000 x 1500 mm – be perstatymo Darbinis diapazonas skersai (X ašis): 3000 mm Darbinis diapazonas išilginis (Y ašis): 1600 mm Didelė tarpiklio gylis: 1600 mm Dujdpfx Acoxrnggs Dor Komplektuojama su multi įrankių sistema Tipas: S11 Vaizdo įrašas pateikiamas pagal užklausą

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Portalinis kranas Bollegraaf, 30 tonų, 32 metrų, kėlimo aukštis 10 metrų Dujdjw S Ea Sepfx Ac Dor

Būklė: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Duedpfxehrnbko Ac Dsr Without control cabinet.

Būklė: beveik kaip naujas (parodų įrenginys), Used/overhauled hoist motor for a DH wire rope hoist ATTENTION! Dsdpfjh Up Uyex Ac Dsur We have more than 15,000 Demag spare parts in stock. For further information, please visit our website or see our other listings.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. Dedefz U S Ejpfx Ac Dour It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.