Vamzdžių lenkimo staklės

ERCOLINA Topbender TB 050 T

Būklė: geras (naudotas), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roll diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin wall): Ø 70x1.5 mm, min. bending radius Ø 700 mm Tube capacity (thick wall): Ø 2" x 3.2 mm, min. bending radius Ø 450 mm Angle steel capacity: 50x50x6 mm, min. bending radius Ø 400 mm Flat bar capacity: 50x10 mm, min. bending radius Ø 250 mm Rodpfxjw Hx Tvj Akzst Flat bar capacity (on edge): 100x15 mm, min. bending radius Ø 250 mm Box section capacity: 50x50x3 mm, min. bending radius Ø 500 mm Shaft capacity: Ø 35 mm, min. bending radius Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Būklė: geras (naudotas), Gamybos metai: 1975, darbinis plotis: 3 100 mm, plieno lakšto storis (maks.): 10 mm, nerūdijančio plieno lakšto storis (maks.): 6 mm, galinis atmušas: 700 mm, bendras svoris: 6 000 kg, bendras ilgis: 3 400 mm, bendras plotis: 2 200 mm, bendras aukštis: 1 800 mm, pjovimo ilgis (maks.): 3 100 mm, gerklės gylis: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 kW, working height 800 mm, motorized rear gauge 700 mm, adjustable cutting angle, adjustable blade clearance, cutting length selector, 3 front support arms, foot pedal, finger guard, pneumatic sheet holding device, dimensions 3400x2200x1800 mm, weight approx. 6000 kg Redevvwdyjpfx Akzjt

Būklė: naujas, Gamybos metai: 2025, 2-roll driven profile roller Rodpfehgiuhex Akzjt Hydraulically adjustable upper roller Shaft diameter: 40 mm Roller diameter: 152–162 mm Rotational speed: 8.5 rpm Upper roller adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii starting from 1.5xD → Maximum bending capacity (tube): 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity (tube): 30 x 30 x 3 mm → Maximum bending capacity (tube): 42.4 x 2 mm (stainless steel, 0.2 260 N/mm²) → Total connected load: 3 kW → Tube feed-in length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The touch display controller allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed by the chuck in the carriage, ensuring precise tube positioning and highly accurate geometry production. Standard features also include pre-bending geometry control: if the bend is initiated at the wrong position, the system blocks the process, thereby preventing operator errors. Optional additional features increase convenience, output, and overall system efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is via USB stick or network. Existing tube geometries can be imported with the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left bending direction Redpfx Akotr U Hlszet → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck for tube fixation in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After entering length and angle, the control calculates feed and bending angles automatically. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Būklė: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 6424102096, Offer No. 25101 Rjdpfx Aewpincekzet Technical Specifications: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw blade dimensions 5090 x 34 x 1.1 mm - Cutting speed, infinitely variable 17 - 90 m/min - Hydraulic lifting/lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed roller conveyor 7000 mm - Outfeed roller conveyor with stop and digital display 4000 mm - Space required approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Būklė: naudotas, Gamybos metai: 1994, Cutting diameter: 520 mm Saw blade length: 7239 mm Cutting width: 1.3 mm Control: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Residual piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Saw blade dimensions: 7239 x 50 x 1.3 mm Rjdpfx Aswm Rm Iekzjt Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight approx.: 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: Infeed roller conveyor, 2500 mm long, chip conveyor, coolant system

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - with: - Foot switch - Center punch locating device - Support table with folding stops, W 1100 x D 850 mm Redpepuy H Dofx Akzjt - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Būklė: naujas, Gamybos metai: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Minimum/maximum bending radius: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirements: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length 3000 mm Standard bending equipment: • Electronic Siemens SIMATIC control system • Function selection and operation via 4.3-inch touch panel • Standard 4-angle preset or program mode • 80 memory locations for up to 10 sets • Target/actual value display for bending angle • Compact, forward-set bending head • Optimized tooling system • Hydraulic bending drive, operated by proven hand lever • Hydraulic tube clamping • Hydraulic slide shoe positioning • Hydraulic mandrel extraction • Mobile machine, suitable for portable use Redpfx Asxcuicskzot Sawing unit for optimal right-angle saw cuts: • Saw position visualization with line laser • Folding saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments: • With swivel device for optimal accessibility Including optional equipment: - 6 each of length and angle stops included – length 3000 mm - 2-axis position display for length and rotation (displayed on touch panel) – length 3000 mm - Early mandrel extraction for optimal bend quality • For use with ball mandrels • Mandrel automatically retracted during bending process • Adjustable continuously up to 10° via programming - Automatic mandrel lubrication – oil minimum-quantity lubrication - TUBOLUB Z-M (5 liters/canister) for minimal-quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software – Pipe bending software PIPEFAB 4.0 BE Basic package • Oracle Express database for single user operations • Generation of isometries (single pipe) • ConCSVImp – CSV import interface format • Calculation of bending data considering springback, elongation, and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim – Bending simulation and graphic display via parametric tool design • BendCon – Creation and transmission of NC bending data for TUBOMAT - IsoTools – 3D visualization, labeling tools - ConSTEP – STEP-format import interface - Tool holders - Bending tools consisting of bending roller, clamp, and stationary slide - Bending mandrels, 3000 mm, for steel tubes, version with lubrication channel for oil minimum-quantity lubrication - Pre-assembly nipple - Counter-hold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel pipes - Commissioning - Packaging costs

Būklė: naudotas, Gamybos metai: 1999, Pipe diameter up to 60 mm Rsdpfx Akevvnm Sezet Machine weight approx. 1.8 t

Būklė: naujas, Tubend Hydraulic Profile Ring Bending Machine HPK 50 3 driven rollers Digital display Incl. standard roller set for steel Hydraulic / Motorized ring bending machine Usable horizontally and vertically with 3 driven rollers 3 rollers motor-driven Upper roller adjustment hydraulic Hydraulic force: 8 tons Rollers are hardened Left/right operation via foot pedal Shaft diameter: 50 mm Roller diameter: 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Rjdpfxoum R U As Akzst Electrical connection: 400 V According to CE standards Weight: 510 kg Dimensions (L x W x H): 810 x 950 x 1500 mm Performance table: see PDF file