Lengvojo metalo diskinis pjūklas

EMMEGI Automatic 450

Būklė: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Gsded N H A Nspfx Ap Isiu Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Suvirinimo aparatas: FUSION 4H Skydo iškrovimo blokas Gedpfx Apsxzzxbo Isiu Pirmasis frezavimo modulis Q-MATIC 1 Nuoseklusis ryšys tarp suvirinimo aparato ir valymo įrenginio Sukamasis stalas Valymo įrenginys (antrasis modelis) TRIMMER 4A Ištraukimo stalas Antrasis frezavimo modulis (INTEGRA Q2) Q-MATIC 2 Gamybos linijos prižiūrėtojo nešiojamas kompiuteris

Gamybos metai: 2012, būklė: paruoštas naudoti (naudotas), A Schüco profile assembly table for sash fitting installation is available. Assembly capacity: approx. 6–8 sashes/day. Fitting system: Schüco AvanTec. Minimum pressure: 0.7 MPa. Maximum air flow: 20 l/min. Machine weight: approx. 1,200 kg. On-site inspection is possible. Gedpfswwlk Nox Ap Isiu

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7232, Schweiß- und Reinigungszentrum STUERTZ SE-VSM-B und SE-2AS-CNC Gebraucht, Baujahr 2000 Gisdpfxjw Edz As Ap Ieu Datenbank mit Gealan-, Rehau- und Aluplast-Profilen. Es ist eine Funktion zum Schweißen von HFL-Fenstern vorhanden. Dokumentation sowie weitere Fotos und Videos auf Anfrage verfügbar. Installation und Inbetriebnahme können von uns durchgeführt werden.

Gamybos metai: 2004, būklė: geras (naudotas), A used, well-maintained double mitre cold circular saw from KASTO, model: "KASTOdisc A10" - Fully automatic operation - Single cut function - Hydraulic vices - Central lubrication for saw guides - Coolant system - Documentation included Saw blade diameter: 350 mm Cutting range: Gijdpfxokfvhkj Ap Iou Round at 90° / 45°: 100 / 100 mm Square at 90° / 45°: 100x100 / 100x100 mm Rectangular at 90° / 45°: 170x100 / 130x100 mm Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg For further technical data, please refer to the PDF document. Technical specifications and dimensions subject to change and errors excepted.

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 25019, Funkcionalumas: visiškai funkcionalus, Schneid- und Bearbeitungszentrum STUERTZ STBAZ-IPT 40000-S-V Gebraucht, Baujahr 2000 Gjdpfx Apsw Edyfe Ioiu Vollautomatisches CNC-Säge- und Bearbeitungszentrum für PVC-Kunststoffprofile, mechanisch für dieses Alter in sehr gutem Zustand. Sägen, Bearbeiten, Verschrauben der Verstärkung, Durchbohren der Stahlverstärkung, Etikettendruck. Datenbank mit Profilen von Gealan, Rehau und Aluplast Dokumentation sowie zusätzliche Fotos und Videos verfügbar. Montage und Inbetriebnahme können von uns durchgeführt werden.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, PUSIAUTOMATINIS DISKINIS PJOVIMAS MEP TIGER 352 SX EVO - Disko sukimas 4 greičiais (15/30/45/90 aps./min.) - Sukamasis stalas montuotas ant centrinio kaiščio ir ašinio guolio - Pjovimo galvos padavimas dviguba linijine kreiptimi Gedpfexdr Rtsx Ap Ieiu - Mechaniniai ribotuvai ties -45°, 0°, +45° ir +60° su fiksavimo įrenginiu bet kurioje padėtyje - Naudotojo sąsaja su ekranu

Būklė: reikia remonto (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade diameter: 60 – 250 mm Motor power: 1.5 kW Saw blade feed: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 – 1885 m/min (non-ferrous metals) Giodpfx Aeuiy I Ajp Iou Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Round material working range: 5 - 70 mm (steel) Round material working range: 5 - 50 mm (non-ferrous metals) Feed length: 5 - 500 mm 5-9999 mm (multiple stroke) Max. feed rate: 500 mm/sec Weight (saw) approx.: 610 kg Dimensions LxWxH (saw) approx.: 2500 mm x 1000 mm x 2000 mm The machine will be completely overhauled in our facility according to customer requirements. Among others, the following components will be renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - Replacement of pneumatic feed and ball screw - Replacement of servomotor and servo drive - Replacement of frequency converter for main saw drive - New electronic components - New pneumatic lines - Servicing/replacement of all pneumatic cylinders and valve terminals - Optimization of extraction system - Servicing of central and minimal lubrication systems - Replacement of general wear parts - Overhaul of machine bed The machine is additionally equipped with: - Minimal lubrication for superior cutting quality Thanks to its features and design, the machine is suitable for high-volume cutting of steel within close tolerances. Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Conversion of the sawing unit to a direct-drive main drive for processing non-ferrous metals and plastics (speed: 1000 – 3000 rpm) - 1000 mm feed unit - 2000 mm feed unit - 4 m inclined magazine - 6 m inclined magazine - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for high-volume clamping of round materials - Discharge system - Delivery and installation at your facility - Training for your staff

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2005, It is important to note that there are a total of two welding machines and two CNC corner cleaning machines available, providing two complete production lines. The machines are fully operational and still in daily use. CE Compliance: Yes (CE marking on the machine) Power Supply: 400 V Frequency: 50 Hz Power Connection: 25 A Main Switch: Industrial main switch with safety interlock Operating Air Pressure: 7 bar Main Components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – insertion of heated welding plate – PVC melting – applying welding pressure – welding cooling – frame removal The system operates in semi-automatic/automatic mode. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control System Industrial PC control Giodoyyavrepfx Ap Isu Safety System - Light curtain - Emergency stop button - Safety covers - CE compliance Currently powered in Hungary; the system can be dismantled and delivered around June.

Būklė: naudotas, Gamybos metai: 2022, Electronic Double Mitre Saw – PERTICI 500TS / 500TS-22 Electronic double-head mitre saw by PERTICI INDUSTRIES, engineered for high-precision cutting of PVC and light alloy profiles. The machine features a fixed left head and an automatically positioned mobile right head, with linear and angular movement electronically controlled. Ideal for professional window and door frame manufacturing. Key features - Automatic double head - Mobile right head with automatic positioning - Automatic head rotation: - 90° / 45° (500TS) - 90° / 22.5° (500TS/22) - Programmable electronic control - 15” TFT Touch Screen monitor - USB and Ethernet ports - Windows CE / Windows Embedded operating system - Cutting list optimisation - Automatic profile height correction - Capability for single-head operation - Fully enclosed pneumatic safety guards - Two-hand safety cutting control device Processable materials - PVC - Plastics - Light alloys / aluminium Cutting capacity Available lengths: - 4,000 mm - 5,000 mm - 6,000 mm Maximum cutting length: - up to 6,100 mm - Blade Ø 500 mm (optional Ø 520 mm) Automatic cutting angles: - 90° - 45° - 22.5° (TS/22 version) Technical specifications - Number of blades: 2 - Motor power: 4.4 kW each - Blade speed: 2,800 rpm - Power supply: 400 V three-phase - Air pressure: 6.5 – 8 bar Weight: - approx. 1,670 to 1,910 kg Gisdoy Rl Syjpfx Ap Isu Blade peripheral speed: - up to 76.2 m/s Standard equipment - Horizontal and vertical pneumatic vices - Lateral roller supports - Full protective enclosures for the cutting area - Pre-equipment for industrial label printer - 15” touch screen on Windows platform - Profile thickness gauge (electronic profile thickness measuring device) – see photo no. 7 - Central anti-deflection profile support – see photo no. 8