Paspauskite stabdį - hidraulinis

EHT VARIOPRESS 225-30

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2004, Press force: 225 t Bending length: 3050 mm Distance between uprights: 2550 mm Control type: DNC 1200PS Eco/Col Ram stroke: 700 mm Frame throat depth: 405 mm Distance table/ram: min. 320 / max. 1020 mm Total power requirement: 29.5 kW Machine weight approx.: 15,500 kg Equipment/Features: Rear gauge Backgauge adjustment: - X-axis reach (from bending line): 5-1000 mm - X-axis adjustment speed: max. 500 mm/sec Height adjustment: - R-axis range (from table surface): 85-235 mm - R-axis adjustment speed: max. 150 mm/sec Backgauge finger adjustment: - Z1-axis range (from left table end): 520-2365 mm - Z1-axis adjustment speed: max. 1000 mm/sec - Z2-axis range (from left table end): 690-2535 mm - Z2-axis adjustment speed: max. 1000 mm/sec - X1-axis range (from centre line): ±125 mm - X1-axis adjustment speed: max. 250 mm/sec Matrix shifting – adjustment via backgauge (MVX): - Adjustment range: max. 100 mm - Adjustment speed same as X-axis: 500 mm/sec Giedpexb Tftefx Abdsl Front bending aid: - Swivel angle BV1/BV2-axis: 55° - Swivel speed BV1/BV2-axis: max. 45°/sec - Lifting force per swing arm BV1/BV2-axis: max. 1500 N

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC Twin-Spindle Turning Center Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Maximum turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel paths: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Giodpowcd S Nefx Abdsl Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter-spindle slide: 180 mm Z3 – Counter-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar diameter: 102 mm Draw tube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter Spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar diameter: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction tubes  NC-controlled workpiece unloader from both main and counter spindle The unit consists of NC-controlled * horizontal axis * swivel unit * vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter-spindle slide  Easy-Tool Monitor  1 collet chuck for quick-change chuck size 100 for main spindle  1 collet chuck for quick-change chuck size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chucks size 100 (total stock)  Change device, pneumatic ø 100 mm  Approx. 50 various tool holders, stationary and driven (total stock)  Mounting elements  Documentation

Sąlyga: geras (naudotas), Gamybos metai: 1978, žalvario lakšto storis (maks.): 3 mm, Motorized Folding Machine Manufacturer: Lotze Model: HZ – 2500 x 3mm Year of manufacture: 1978 Godpforc E S Esx Abdsil Technical Data Manufacturer: Lotze Model: HZ-25 Year of manufacture: 1978 Working length: 2500 mm Sheet thickness: max. 3 mm Equipment - Bending angle adjustment via potentiometer - Tool set including clamping rail, bending rails, reinforcing rails - Manually adjustable back gauge All information subject to change without notice.

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder Gisdpexp Hmaefx Abdjl We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Gamybos metai: 2023, Sąlyga: paruoštas naudoti (naudotas), An as-new MicroStep CNC plasma cutting system including Hypertherm air plasma power source, nesting software, and Aigner filter unit is available. 1) MicroStep MasterCut Compact CNC plasma cutting machine, year of manufacture: 2023, Working area X/Y: 3000mm/1500mm, Machine dimensions X/Y: approx. 4350mm/2650mm, Weight: approx. 3100kg, Plasma source: Hypertherm Powermax 45 XP, Control: MicroStep iMSNC, Operating hours: approx. 2588h. 2) Hypertherm Powermax 45 XP plasma cutting and gouging system, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter unit, weight: approx. 500kg. Documentation available. Inspection on site is possible. Expected to be available from the end of 2025. Gisdjwn H Udopfx Abdjl

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, mašinos/transporto priemonės numeris: 778 F 319, Lazerinio pjovimo įrenginys Gamintojas: Prima Power Modelis: Palatino 1530 Pagaminimo metai: 2012 Komplektacijoje: Oro filtravimo sistema su aukšto efektyvumo nanoplaušelių filtrais, ilgaamžiai Giedemx Rrljpfx Abdol ir vandens aušinimo sistema (KLIMA)

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Godov Scrbepfx Abdeil

Gamybos metai: 2005, Sąlyga: beveik kaip naujas (naudotas), Gebrauchte Bystronic PR 100, 8-Achsen CNC-Abkantpresse in hochwertigem Zustand zum Verkauf verfügbar BYSTRONIC PR100 x 3100, 100 t x 3100 mm, 8-Achsen CNC-hydraulische Gesenkbiegepresse, komplett mit Cybelec Modeva 10S Steuerung. Baujahr 2005 – seit Neuanschaffung vollständig durch Bystronic UK gewartet Gijdpfx Abshufktjdjl Technische Daten: • Baujahr: 2005 • Steuerung: Cybelec Modeva 10S • Hinteranschlag: programmierbar • Schutzvorrichtung: Fiessler AKAS • Presskraft: 100 Tonnen • Maximale Biegelänge: 3100 mm / 3 Meter • Erweiterte Einbauhöhe – wird noch bestätigt • Maximaler Hub: 315 mm • Eilgang: 180 mm/s • Biegegeschwindigkeit: 10 mm/s • Rücklauf: 150 mm/s • Ober- und Unterwerkzeuge enthalten • Fußschalter vom Typ „Wander“ • Insgesamt 8 Achsen: Y1, Y2, X1, X2, R1, R2, Z1, Z2 – 6-Achsen Hinteranschlag • Hydraulische Bombierung Lieferung und Montage inkl. Bedienerschulung können angeboten werden. Gerne beraten wir Sie und liefern auf Wunsch neue Werkzeuge, passend zur Fertigung Ihrer Blechprodukte auf dieser CNC-Abkantpresse.

Sąlyga: naujas, NEW MACHINE - Wet vacuum extraction available in steel or stainless steel - Extraction capacity: 1,650 / 3,750 / 7,000 m³/h Giedpfx Asci Tlrjbdsl - Motor: 3 / 5.5 / 15 kW

Gamybos metai: 1988, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90°, round: 130 mm Cutting capacity at 90°, square: 120 x 120 mm Mitre cutting capacity at 45°, round: 130 mm Gisdpfxsz N Ams Abdjl Mitre cutting capacity at 45°, square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed speeds: 670 mm/min Cut-off length with automatic feed: up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6 / 2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg