Įpjovimo staklės

Edel 910E

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. Psdsfg E Hpspfx Ah Hspl • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm BRUDERER precision double-roller feeder: left side Adjustable stroke range: 16–40 mm Distance between columns: 330 x 300 mm Ppedpfxecxxyce Ah Hsl Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double-roller feeder on left

Sąlyga: paruoštas naudoti (naudotas), Įranga susideda iš: 1 - Ritės nuvyniojimo bokštas su 4 nuvyniotuvais (AG 3000 a) kiekvieno nuvyniotuvo talpa: 3 t svirties ilgis: 1350 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 2 - Ritinėlių selektorius (MT-4 1250) min.: 150 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 3 - Tiesinimo blokas (RM-4 1250) min.: 150 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 4 - Pjovimo blokas (TS 1250 + KST-2) min.: 150 mm maksimali greitis: 25 m/min, reguliuojama dažnio keitikliu 5 - Schechtl giljotininės žirklės pjovimui pagal išmatavimus su Siemens Touch CNC valdymu Ppjdsxqh Saopfx Ah Hel 1250 x 2 mm

Sąlyga: naujas, Sheet thickness: 1.6 mm Pressing force: 4 t Blade length: 156 mm Pedpfx Ajftd Uajh Hopl Angle adjustable from - to fixed degrees Table surface: 450 mm x 305 mm Total power requirement: manual operation, kW Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Ppodpfeb U Hwpex Ah Hsl Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch Pjdpfob U Hwnex Ah Hspl

Sąlyga: naujas, Press pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Ppjdpob U Hwmjfx Ah Hjl Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination by Ortlinghaus - Central lubrication by Vogel - Cam controller by Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naujas, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Pressing force: 135 t Approach speed: 140 mm/s Maximum bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clearance between frames: 2555 mm Ppjdpfx Ahoq Rdtqs Hsl Machine length: 3730 mm Machine width: 2300 mm Overall height: 2850 mm Table height: 900 mm Motor power: 15 kW Oil tank capacity: 190 l Machine weight: 9500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable and precise press beam - Sturdy, double-guided backgauge - Manually adjustable, double-guided backgauge fingers on linear guides - Adjustable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T controller - Fiessler AKAS 2M laser finger guard + FPSC Safety PLC (manual) - X-R axes with servomotors - CNC crowning for high bending accuracy - 2 additional backgauge fingers Further bending lengths and capacities are available with corresponding accessories!

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Sheet width: 3050 mm Sheet thickness: 6.0 mm Frame gap: 3460 mm Strokes per minute, min./max.: 9 / 17 spm Backgauge: 750 mm (motorized) Cutting angle: 0.5° - 3.0° Blade gap adjustment: manual Hold-downs: 18 pcs (hydraulic) Table size: 380 x 3100 mm Total connected load: 7.5 kW Machine weight approx.: 4.56 t Machine dimensions: L: 2.3 x W: 3.7 x H: 1.8 m Equipment: -with side gauge L: 1000 x W: 100 x H: 60 mm and gauge bar 990 mm, with 8 support arms Pedpfx Ahsu Rni He Hspl -Operation via control panel and foot pedal -Cutting zone lighting -Stroke counter -Machine feet in stock *

Sąlyga: naujas, Gamybos metai: 2025, Mechanical Guillotine Shear for Sheet Metal METFORMER HCO-2x2000mm The shear is made entirely of steel, featuring a solid and heavy-duty construction. Its simple design is complemented by an attractive appearance. The machine is easy to operate. This guillotine is widely used for cutting thin and medium thickness steel sheets in light machinery manufacturing and equipment production. The blade is made from a high-strength alloy steel. Technical Data: Model: HCO-2x2000 Motor Power: 3.0 kW Max. Sheet Thickness: 2 mm Ppsdpfsfwmydex Ah Hjl Number of Blade Repositions: 4 Length: 2800 mm Width: 1260 mm Height: 1300 mm Weight: 1350 kg