Vienos kolonos presas - hidraulinis

DUNKES HF-STS 30

Būklė: naudotas, Gamybos metai: 2015, Spaudimas 30 t Dodpfx Ajw D Hiaed Ijup Išsikišimas 250 mm Stalo dydis 650 x 500 mm Eiga 400 mm Montavimo aukštis min. 120 / maks. 500 mm Valdymas Simatic HMI Touch Siemens Bendras galios poreikis 13 kW Mašinos svoris apie 3,5 t Reikalinga vieta apie 2,5 x 1,70 x 2,85 m Veikimo režimai: nustatymas ir atskiras eigos 2 šoniniai stalai, padėjimo plotas 850x500 mm su hidraulinėmis rutulinėmis juostomis sunkiems ruošiniams

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Duodpfx Asfxyhfed Iop Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, veikimo valandos: 906 h, Funkcionalumas: visiškai funkcionalus, įrengimo aukštis: 500 mm, gerklės gylis: 250 mm, spaudimo jėga: 30 t, eigos ilgis: 400 mm, valdiklių gamintojas: Siemens, Press with only approximately 1,000 operating hours! TECHNICAL DETAILS Press Specifications • Pressure: 30 t • Throat depth: 250 mm • Stroke: 400 mm • Minimum installation height: 100 mm • Maximum installation height: 500 mm Control: Siemens SIMATIC HMI MACHINE DETAILS Dsdpew Dax Uefx Ad Isup Total power requirement: 13 kW Dimensions & Weight • Machine weight: approx. 3 t • Space requirement: approx. 2.5 m x 1.70 m x 2.85 m Operating Hours • Total hours: 2,637 h • Working hours: 1,000 h

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, veikimo valandos: 64 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 665901, bendras svoris: 1 154 kg, keliamoji galia: 210 kg, rankos pasiekiamumas: 3 096 mm, This is a KUKA KR 210 R3100 ultra industrial robot, year of manufacture 2017. We are also pleased to offer this robot fully refurbished upon request! The robot is equipped with the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService - SafeOperation - UserTech Dusdpfx Adsu Nzzas Ijp

Būklė: naudotas, Gamybos metai: 2015, TIPAS: L13 / S0540C0311 Pagaminimo metai: 2015 Lazerio veikimo laikas: 33 112 val. Spindulio veikimo laikas: 8 166 val. Galia: 5 000 W Eiga X: 4 000 mm Eiga Y: 2 000 mm Eiga Z: 750 mm Eiga B: ±135° Eiga C: n*360° Ekranas: TFT 12'' Dsdpfx Aoxd Uawod Ieup Sąsaja: SINUMERIK 840D

Būklė: naudotas, Gamybos metai: 2024, Press force: 70 t Throat depth: 325 mm Stroke: 800 mm Drawing cushion force: 35 t Drawing cushion stroke: 280 mm Ejector stroke: 240 mm Rapid downstroke speed: 650 mm/sec Working speed: 58–199 mm/sec Installation height: 1050 mm Table size: 900 x 580 mm Ram size: 460 x 460 mm Dodjvn U Sxspfx Ad Ioup Total power requirement: 45 kW Machine weight: approx. 6.3 t Required floor space (WxDxH): approx. 1000 x 2200 x 4000 mm Design: Super-fast Rapid-working cycle Pressure and stroke shut-off Water cooling Light barrier Centralized grease lubrication Drawing cushion function Ejector in ram Teleservice

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 2 000 h, DKP400v1 (2018) + KR16 (2008) + KRC2 (2008) Dsdorn S S Repfx Ad Ioup

Būklė: naudotas, Gamybos metai: 1990, Pressure 25 t Reach 250 mm Stroke 100 mm Total power requirement 7.5 kW Machine weight approx. 3,200 kg Space requirement approx. 1,000 x 1,700 x 2,600 mm DUNKES CNC Controlled Hydraulic C-Frame Press Model HZS 25 Year of manufacture: 1990 Serial no. H 90-2018 Dodpfx Aet Hw Ezod Ijup ----- Ram pressing force: 25 t Table size: 620 x 460 mm Table height above floor: 820 mm Through-hole in table: 100 mm Max. installation height: 350 mm Throat depth: 250 mm Ram stroke approx.: 100 mm Ram surface: 500 x 350 mm Ram bore: 32 mm Working speeds: rapid advance/return 400/400 mm/s at partial load / at full load: 50 / 18 mm/s Main drive approx.: 7.5 kW - 380 V – 50 Hz Weight approx.: 3,200 kg Overall machine dimensions: 1,000 x 1,700 x 2,600 mm Accessories / Special features: • DUNKES program controller type CNC 100 with data input panel for pressure setting, pressure/time switching, upper/lower stroke, rapid traverse and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to x tool programs, SIEMENS S 5 PLC, teach-in button • Hydraulic shock absorption mounted in the press cylinder • SICK light curtain and two-hand safety control • Intermediate tables mounted, attached control cabinet • Overrun time 85 ms / overrun distance 30 mm, safety distance 170 mm Condition: good to very good – can be demonstrated under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We always have a selection of hydraulic presses in stock, please contact us for further information.

Būklė: naudotas, Gamybos metai: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table dimensions: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Ram pin hole diameter: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-Speed Hydraulic Press Press frame made from rugged welded steel construction. Operating mode selectable via switch: jog, two-hand, foot pedal, or continuous operation with feed. The press features a piece counter on the side. EMERGENCY STOP switch With stroke limitation Press force adjustable With overload protection (pressure relief valve) With cutting impact damping SICK optical safety light curtain is pre-installed (can be reactivated as an option) Dujdju Nfmyopfx Ad Isp *

Būklė: visiškai atnaujintas (naudotas), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Dedpjw S Uazjfx Ad Ijup Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - A complete retrofit kit to allow unrestricted manual loading and unloading in accordance with EC conformity, as well as implementation of equipment to CE standards • New control cabinet with certified dual-channel electronic Siemens safety PLC (1512SP F or 1515F) for cycle control, with integrated operator panel for operating modes: setup two-hand, single stroke two-hand, and foot operation (only in combination with BWS); manual lever operation is no longer possible, • Hydraulic safety block for monitoring the closing motion on the main cylinder, • Position-monitored directional valve for up and down movement of the ram in the main cylinder, • Two-hand control unit with dual-channel monitoring of the two-hand synchronisation on the press table (incl. 5m cable), • Replacement of main and control pump motors, • Replacement of seals on the main cylinder, • Fine filter with contamination indicator, • The press is equipped with an electronic position measurement system (including teach-in function and display of current ram position), eliminating the need for a mechanical cam controller. Main operator panel integrated into control cabinet (mounted on right side of machine): - 12" touch panel - Operating buttons and switches for modes and drives - USB interface for data exchange - Light curtain Option: Draw cushion