Pramoninis robotas

KUKA KR16 DKP400v1

Būklė: naudotas, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 [rpm] - Spindle drive power: 7.6 [kVA] LINEAR AXES - Travel X/Y/Z axes: 500 / 410 / 610 [mm] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 [sec] TABLE - Table size: 650 x 400 [mm] - Max. table load: 200 [kg] ELECTRICAL SUPPLY - Supply voltage: 220 [V] - Total power consumption: 25 [kVA] WEIGHT AND DIMENSIONS - Required space: 1,640 x 2,100 [mm] - Machine height: 2,274 [mm] - Machine weight: 2,250 [kg] MACHINE HOURS - Operating hours: 9,070 [h] ACCESSORIES - Control: BROTHER A00 Dusdpfx Asuhbt Rjd Iep - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 [bar] - Oil mist extraction: AAF Astrosta - Electrical transformer - Tool holders: 42

Gamybos metai: 2003, būklė: geras (naudotas), Travels: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Djdjiwkhkspfx Ad Ijup

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Dujdpfx Adsfxyhfe Ijp Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, veikimo valandos: 11 500 h, mašinos/transporto priemonės numeris: 3098, lazero valandos: 6 900 h, lazerio galia: 10 000 W, maks. lakšto storis: 30 mm, plieno lakšto storis (maks.): 30 mm, galia: 10 kW (13,60 AG), paskutinio kapitalinio remonto metai: 2024, darbo diapazonas: 4 020 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series featuring the following specifications: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filter system with 7.5 kW Technical Data: Model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data (Drilling Unit): Drilling capacity: Ø 4 mm - Ø 30 mm Thread cutting: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Dodpfevw Tdlox Ad Ieup Automatic measurement of drilling tools Pneumatic hold-down device Brush for removing drilling chips Donaldson® Filter System DFPRO 6 Cyclopeel Fan output: 7.5 kW Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software Includes Witt gas mixer The machine was always operated with a maintenance and support contract.

Būklė: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: MS 1153, Technical data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement blasting unit: 1600 x 2000 x H 1750 mm - Space requirement blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Suction fan: 3 kW - Space requirement filter unit: 1600 x 1600 x H 3250 mm Djdpfxollvr Do Ad Ieup - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Būklė: geras (naudotas), Gamybos metai: 2012, rankos pasiekiamumas: 2 696 mm, valdiklio modelis: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data Maximum Reach: 2696 mm Rated Payload: 90 kg Rated Additional Load Carousel / Wrist / Arm: 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Position Repeatability (ISO 9283): -/+ 0.06 mm Number of Axes: 6 Mounting Position: Floor Duedpfx Adetpwxlo Isp Installation Footprint: 830 mm x 830 mm Weight: approx. 1058 kg Axis Data Motion Range A1: -/+ 185 ° A2: -140 / -5 ° A3: -120 / 155 ° A4: -/+ 350 ° A5: -/+ 125 ° A6: -/+ 350 ° Speed at Rated Payload A1: 136 ° / s A2: 130 ° / s A3: 120 ° / s A4: 292 ° / s A5: 258 ° / s A6: 284 ° / s Operating Conditions Ambient Temperature During Operation: 10 °C to 55 °C (283 K to 328 K) Controller: KR C4

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, mint condition * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad Duodpfx Ajqfguaed Iop * Beam switch with 4 fiber outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional: Fieldbus interface & IIO3 card available * 2 units available

Būklė: visiškai atnaujintas (naudotas), KUKA KR360-2 Dodpfx Adehy N Rpe Ieup

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, Haas Multigrind CB CNC-Schleifmaschine mit mehreren Achsen, 12-fach Werkzeugwechsler, Siemens Sinumerik 840D Steuerung, Be- und Entladen automatisch, LTA Industrie-Luftreinigungsanlage, Baujahr 2010 Technische Daten - Schleifspindeln (mit zwei Spindelenden) Aufnahme-Kegel ø 31,75 mm Leistung 100% / 40% ED: 11,5 / 14,5 kW Drehzahl Standard: 8.000 min⁻¹ Option: Ein Spindelende Aufnahme: HSK 50E Leistung 100% / 40% ED: 11,5 / 14,5 kW Drehzahl Standard: 8.000 min⁻¹ Option: Ein Spindelende Aufnahme: HSK 50E Leistung 100% / 40% ED: 11 / 12 kW Drehzahl Standard: 18.000 min⁻¹ Option: Ein Spindelende Aufnahme: HSK 80E Leistung 100% / 40% ED: 30 / 30 kW Drehzahl Standard: 8.000 min⁻¹ Dsdpev Igg Iofx Ad Ijup Option: Hochfrequenzspindel – auf Anfrage Maschinentisch Spannfläche: 1.000 x 500 mm Anzahl, Abstand und Breite der T-Nuten: 9 / 50 / 12H7 mm Bearbeitungsbereich X-Achse: 700 mm (optional) 1.000 mm (optional) 1.200 mm Y-Achse: 410 mm Z-Achse: 500 mm C-Achse Schwenkbereich: 320° Option: X3 – Zusatzachse Verfahrweg: 400 mm Messsystem & Vorschub Auflösung Linearachsen: 0,0005 mm Eilgang Linearachsen: 30.000 mm/min Auflösung Rundachsen: 0,001° Drehzahl C-Achse: 400 min⁻¹ Rundachse (A-Achse) Standard Spitzenhöhe: 175 mm Drehzahl als Spindel: 2.600 min⁻¹ Standardaufnahme: ISO SK 50 / Zentrierung 70H5 Optional: HSK 100 / 80 / 63 / 50 Werkzeugwechsler-Option HSK50E Anzahl Werkzeugplätze / Werkzeugdurchmesser Innenrad: 5 / 300 mm bis 9 / 100 mm Außenrad: 7 / 300 mm bis 16 / 100 mm HSK80E Anzahl Werkzeugplätze / Werkzeugdurchmesser Innenrad: 5 / 300 mm bis 8 / 100 mm Außenrad: 7 / 300 mm bis 14 / 100 mm Werkstückgröße Durchmesser: 340 mm Länge: 550 mm Länge zwischen Spitzen: 500 mm Anschlusswerte Betriebsspannung: 400 V / 50 Hz, abgesichert mit 80 A Steuerung: Siemens Bahnsteuerung – Sinumerik 840 DSL Pneumatik: Betriebsdruck: 6 – 10 bar Gewicht Gesamtgewicht je nach Ausstattung: 10.000 kg oder mehr Stellfläche Länge x Breite (Standard): 3.227 x 2.700 mm Höhe im Betrieb: 3.550 mm Höhe mit Kühlmitteloption: 3.810 mm (min. Hallenhöhe 4.100 mm)

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11/15 [kW] - Torque: 51/110 [Nm] - Spindle speed: 4500 [rpm] - Max. bar capacity: 66 [mm] - Max. machinable diameter: 340 [mm] - Max. swing over bed: 400 [mm] - Max. main chuck diameter: 190 [mm] - Minimum C-axis resolution: 0.001 [deg] TURRET - Number of stations: 12 - Number of live stations: 12 - Travel range X/Z: 227.5 [mm] - Travel range Y: +/- 41 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 3.7/5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 21 [kW] WEIGHT AND DIMENSIONS - Footprint: 2000 x 1600 [mm] - Machine height: 1850 [mm] - Machine weight: 4300 [kg] Dusdpfx Aovzt Hbjd Iop ACCESSORIES - Control: Fanuc - Interface: Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chip conveyor - Oil mist extraction: DONALDSON - Tool measuring probe system - Parts catcher - Parts conveyor belt - Fire suppression system *: SIEMENS * NB: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer. - Number of driven tool holders: 2 - Number of static tool holders: 4 - Collet chuck: EROWA