Vienos kolonos presas - hidraulinis

DUNKES HF-STS 30

Būklė: naudotas, Gamybos metai: 2015, Spaudimas 30 t Iškyša 250 mm Stalo dydis 650 x 500 mm Eiga 400 mm Įrengimo aukštis min. 120 / maks. 500 mm Valdymas Simatic HMI Touch Siemens Bendra galia 13 kW Staklių svoris apie 3,5 t Reikalinga vieta apie 2,5 x 1,70 x 2,85 m Darbo režimai: derinimas ir vienkartinis eigos režimas Staklių apšvietimas 2 šoniniai stalai, atramos plotas 850x500 mm Dujdpfxsxz Hfmo Ad Iep su hidraulinėmis rutulinėmis juostomis sunkiems ruošiniams

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Dedpfsfxyhfex Ad Ijup Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, veikimo valandos: 906 h, Funkcionalumas: visiškai funkcionalus, įrengimo aukštis: 500 mm, gerklės gylis: 250 mm, spaudimo jėga: 30 t, eigos ilgis: 400 mm, valdiklių gamintojas: Siemens, Press with only approximately 1,000 operating hours! TECHNICAL DETAILS Press Specifications • Pressure: 30 t • Throat depth: 250 mm • Stroke: 400 mm • Minimum installation height: 100 mm • Maximum installation height: 500 mm Control: Siemens SIMATIC HMI Dsdow Dax Uepfx Ad Ijup MACHINE DETAILS Total power requirement: 13 kW Dimensions & Weight • Machine weight: approx. 3 t • Space requirement: approx. 2.5 m x 1.70 m x 2.85 m Operating Hours • Total hours: 2,637 h • Working hours: 1,000 h

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Djdpfegpxc Ssx Ad Ieup Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Būklė: naudotas, Gamybos metai: 2000, Grinding length: 800 mm Centre height: 150 mm CNC control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22-313 / 51-750 rpm Workpiece headstock swivel: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Dodpsu Hag Nefx Ad Isup Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Required space (LxWxH): approx. 3.7 x 2.2 x 1.9 m Includes: - Coolant system - Enclosed steady rest - Diamond dresser - Open steady rest - 3 grinding wheels - 3 flanges - Internal grinding spindle attachments

Būklė: geras (naudotas), Gamybos metai: 1988, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 550 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dressing device with compensation Vertical digital readout Dusdpeu Rqynjfx Ad Iop Mounting for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW 1435 rpm Wedge-shaped leveling pads Coolant system with universal paper band filter Complete documentation

Būklė: naujas, Pressure: 8.5 kN Duodpfefv Awaex Ad Isp Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and reduced air consumption

Būklė: naudotas, Gamybos metai: 2013, tekinimo skersmuo virš slankiojančio stalo: 435 mm, tekinimo skersmuo virš viršutinio vežimo: 245 mm, centro aukštis: 210 mm, plotis centre: 1 500 mm, bendras svoris: 1 700 kg, Technical specifications Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Center height: 210 mm Distance between centers: 1500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Dusdpfx Adoykakpo Ijp Equipment • Infinitely variable speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks by Röhm Duro • Multifix quick-change toolpost + 10 inserts • Fahrion collet chuck + approx. 33 collets • Fixed and travelling steady rests • Various live and dead centers + drill chuck • Coolant system • Documentation Heidenhain ND 780 digital position indicator • 3-axis display for bed, cross, and top slide • Tool memory for 16 tools, with reference point per axis • Sum key for Z and Zo axes • Switchable between inch/metric • X axis travel can be displayed as radius or diameter • Delta key – “distance-to-zero” display • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A powered demonstration is possible at any time in our exhibition hall.

Gamybos metai: 1978, būklė: naudotas, mašinos/transporto priemonės numeris: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Required space: 1070 x 650 x 1180 mm Duodpfx Ajbx Elisd Iop Drive motor: 500 V (with 380 V: 1/3 power loss), accordingly 0.6 kW

Būklė: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Duodpfx Adsvprv Rj Iep Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.