Laivo posūkio vieneto

DUMETA D-CHGK-5-D

Būklė: naujas, Load capacity 5.0 t Workpiece diameter 100 - 2500 mm Total power requirement 2 x 0.37 kW Maximum load on drive unit: 2500 kg Maximum load on idler unit: 2500 kg Table rotation speed: 100 - 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight approx. 0.9 t Includes double foot pedal (Start-Stop / Left-Right) Gsdpfxogvwgcs Ap Ieiu Includes wired remote control

Būklė: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Gedpehpktvofx Ap Ioiu The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Load capacity: 5 t Workpiece diameter: 100-2500 mm Wheel diameter: 250 mm Wheel width: 140 mm Total power requirement: 0.8 kW Gisdpjfv A Axofx Ap Iou Machine weight approx. 0.8 t Space requirement approx. 2.0 x 1.4 x 1.0 m Features • Electronic components by Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Various running rollers available: steel/rubber/polyurethane • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Wired remote control • Double foot pedal • 3-year warranty (see warranty conditions) Discount for solid rubber wheels: EUR 613,-

Būklė: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Giodpfx Ajd S Uf Sep Iou Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: Round tube up to 48 x 3.0 mm Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase.

Būklė: naujas, Bandsaw machine Brand: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting capacity (round): 300 mm Blade speed: 20-100 m/min, infinitely variable Standard features: - Fully hydraulic, semi-automatic design After starting, the machine automatically clamps, returns to the starting position after the cut, stops the saw blade, and opens the vice. - Cut sensor for automatic detection of material height Giodpfx Apsilg Hdo Isu - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base Gsdpfxofu Ivzj Ap Isiu • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: labai geros būklės (naudotas), Four-sided planer SCM Compact XL Gisdpfx Aslat Hdep Isu - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Būklė: naujas, Gamybos metai: 2026, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials Two-pole drive motor enables band speeds of 30 and 65 m/min Saw blade tension is monitored electromechanically via a microswitch When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required Saw arm inclined by 25°, resulting in longer blade service life Precise and robust blade guides with adjustable carbide plates After completion of the cutting process, the saw band stops automatically in the lower end position Saw arm lowering by gravity or manually Giedpsg U Uv Rjfx Ap Iju Infinitely variable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Material feed table height: 925 mm Cutting capacities 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular horizontal (hollow profile): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular horizontal (hollow profile): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular horizontal (hollow profile): 90 x 90 mm Art. No.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 000 mm, galia: 13 kW (17,68 AG), It is a LEVIBRETON ONE surface grinding machine. The machine features a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of hard stones and soft stones (such as marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Giodpfxsrpi E Ao Ap Iju

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm Gedjhlp D Nspfx Ap Ioiu - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.