Laivo posūkio vieneto

DUMETA D-CHGK-5-DPU

Būklė: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Gijdpfx Apjhpktvj Iou The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Bandsaw machine Brand: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting capacity (round): 300 mm Blade speed: 20-100 m/min, infinitely variable Standard features: - Fully hydraulic, semi-automatic design After starting, the machine automatically clamps, returns to the starting position after the cut, stops the saw blade, and opens the vice. - Cut sensor for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip removal brush Gsdsilg Hdjpfx Ap Isiu - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Būklė: naujas, Gamybos metai: 2026, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials Two-pole drive motor enables band speeds of 30 and 65 m/min Saw blade tension is monitored electromechanically via a microswitch When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required Saw arm inclined by 25°, resulting in longer blade service life Precise and robust blade guides with adjustable carbide plates After completion of the cutting process, the saw band stops automatically in the lower end position Saw arm lowering by gravity or manually Infinitely variable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Material feed table height: 925 mm Cutting capacities 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular horizontal (hollow profile): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm Giodpfx Apeg U Uv Ro Iou -45° rectangular horizontal (hollow profile): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular horizontal (hollow profile): 90 x 90 mm Art. No.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm Giedpfx Aeqt Dmyop Iju - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, Model designation Gjdpfegvquwjx Ap Ioiu Shark 332-1 CCS

Gamybos metai: 1996, būklė: geras (naudotas), mašinos/transporto priemonės numeris: xxxx, High-Performance Bench Tapping Machines on T-Slot Table Technical Data: - Tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (swing radius) 2500 mm - Quick-change tool holder, size 2, Ø31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator Gisdpjf Tcy Dofx Ap Isu - Mobile base frame - Required floor space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, For sale is a pallet wrapper of the brand Strapex, model Delta SWS 18. The unit has been disassembled for transport but is fully operational and ready for use once assembled (example image is an original manufacturer image). Technical data: • Turntable diameter / mm: 1800 mm • Maximum wrapping speed / rpm: 10 rpm • Weight / kg: 350 kg • Manufacturer: Strapex • Maximum load weight / kg: 1,500 kg • Power supply / V: 220 V • Wrapping types: - Top sheet wrapping - Bottom wrapping - Head wrapping - Cross wrapping - Spiral wrapping Transport and loading can be organized Europe-wide upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale Gisdpewza Dxjfx Ap Isu PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to get in touch, please visit our website.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Rotation speed: 0.01 - 1.1 rpm Tilting angle up to 135° Gedpfxod Anz Rj Ap Isiu Hand and foot remote control with speed display Very robust construction

Būklė: naujas, Gamybos metai: 2023, Welding positioner, vessel rotator with 6000 kg load capacity. Digital display with foot remote control. Gijdpfx Apsk Adl He Isu For diameters from 180 mm up to 3500 mm. Drive roller diameter: 300 mm. Dimensions: Length 1900 mm × Width 470 mm × Height 390 mm. Infinitely variable speed: 200 – 1800 mm/min.

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), 603 LBH Technische Beschreibung Haupttechnische Daten • Minimale Schnittkapazität bei 90° min. mm 60 x 10 max. mm 610 x 310 • Schnittkapazität bei 45° mm 400 x 310 Gijdpfxel Si Uus Ap Isu • Schnittkapazität bei 60° (nur auf zwei Flanschen mit passender Option erhältlich) mm 250 x 250 • Gehrungswinkel +45° / -60° • Sägebandabmessung mm 34 x 1,1 • Sägebandgeschwindigkeit m/min 78 • Motorleistung Band kW 4 • Arbeitshöhe mm 850