Portalo apdirbimo centras
DROOP + REIN FOGS 40 60 C

Name: DROOP + REIN FOGS 40 60 C
Brand: DROOP + REIN
Availability: InStock

Gamybos metai

2016

Sąlyga

Naudotas

Vieta

Vokietija

Portalo apdirbimo centras DROOP + REIN FOGS 40 60 C

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Portalo apdirbimo centras

Gamintojas:: DROOP + REIN

Modelis:: FOGS 40 60 C

Gamybos metai:: 2016

Sąlyga:: naudotas

Kaina ir vieta

Vieta:: Nordrhein-Westfalen

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A20661665

Nuorodos Nr.:: 1039-9408

Naujinta paskutinį kartą:: Data 2025.12.04

Aprašymas

x-axis: 6,800 mm
y-axis: 4,000 mm
z-axis: 1,500 mm
Control: iTNC 530 HSCI Heidenhain
Clearance between columns max.: 5,090 mm
Distance spindle center to table: 1,825 mm
Type: 175149A-0007
Spindle speed range max.: 19,800 rpm
Main spindle drive power: 20 kW
Tool holder: HSK-A63
Swivel range B-axis: +115° / -115°
Rotational range C-axis: +/- 200°
Type: 178099-0005
Spindle speed range max.: 10,020 rpm
Main spindle drive power: 20 kW
Tool holder: HSK-A100
Swivel range B-axis: +115° / -115°
Rotational range C-axis: +/- 200°
Clamping area table: 6,000 x 3,000 mm
Max. table load: 50.0 t
Height above floor: 100 mm
Number of T-slots: 12
T-slots width: 28H12 mm
T-slot spacing: 250 mm
Number of tool stations: 62 (38+24) positions
Number of tool stations HSK A63: 37+1 positions
Number of tool stations HSK A100: 23+1 positions
Max. tool diameter HSK A63: 52 mm
Max. tool length HSK A63: 250 mm
Max. tool weight HSK A63: - kg
Codpex Avqbjfx Admshf
Max. tool diameter HSK A100: 80 mm
Max. tool length HSK A100: 450 mm
Max. tool weight HSK A100: - kg
Rapid traverse (X / Y / Z): 40,000 mm/min
Rapid traverse B/C: 4,320 °/min
Feed rate X/Y/Z: 30,000 mm/min
Feed rate B/C: 2,160 °/min
Max. acceleration: 3.2 m/s²
x-axis: 6,800 mm
y-axis: 4,000 mm
z-axis: 1,500 mm
b-axis: +115° / -115°
c-axis: +/- 200°
Total power requirement: 180 kVA
Space requirement approx.: 12.5 x 15.0 x 7.0 m
5-axis high-speed portal large machining center
DROOP & Rein - FOGS 40 60 C

- Fork-type head

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2012

129 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 2522 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Universalus apdirbimo centras DMG MORI DMU200P TNC7

Aalen

1 173 km

Universalus apdirbimo centras
DMG MORIDMU200P TNC7

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 800 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 100 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC7, stalo apkrova: 5 000 kg, veleno greitis (maks.): 10 000 aps./min, Įranga: drožlių transporteris, Naudotas 5 ašių apdirbimo centras DMG su TNC7 valdikliu. Atnaujinimas 2025 m. Gamintojas: DMG Deckel Maho Modelis: DMU 200 P Pagaminimo metai: 1999/2025 Būklė: gera, visiškai veikianti Valdymas: Heidenhain TNC7 Techniniai duomenys: - Apvalus stalas D1400 x 1700 mm - Stalo apkrova 6000 kg - B ašis - 60-ių įrankių keitiklis - SK 50 - 10 000 aps./min. - Vidinė aušinimo skysčio padavimo sistema - 980 l aušinimo skysčio bakas - Drožlių transporteris - Plaunamoji pistolete Chodpfx Aoxtwkwodmjf - Infraraudonųjų spindulių zondas Pasirenkama: - Kineopt - VCS-Complete - Aukšto dažnio frezavimo galvutė 30 000 aps./min. Transportavimas ir paleidimas gali būti pasiūlyti atskirai. Tarpinis pardavimas išlieka teisėtas. Už čia pateiktus techninius duomenis neatsakoma. Taikomos teisės aktų nuostatos.

Peržiūrėti detales

mažas skelbimas

CNC tekinimo ir frezavimo centras HWACHEON C1 YSMC con FANUC 0i TF

Faenza

1 483 km

CNC tekinimo ir frezavimo centras
HWACHEONC1 YSMC con FANUC 0i TF

50 000 €

Pradinė kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Cedpsvv Tvfofx Admehf Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp.

Peržiūrėti detales

mažas skelbimas

Tekinimo staklės - valdomos pagal ciklą SEIGER SLZ 850x4000

Vokietija

6 514 km

Tekinimo staklės - valdomos pagal ciklą
SEIGERSLZ 850x4000

Skambinti

Sąlyga: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Distance between centers: 4000 mm Faceplate diameter: 800 mm Control: Siemens 810D Spindle speed: 1 - 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse in X-direction: 4 m/min Rapid traverse in Y-direction: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 Size 11) Operating hours / On-hours: to be read out Tailstock quill: ISO MT 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power requirement: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH): approx. 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox stages Stage II: Spindle torque 258.9 to 1,364.6 Nm Csdeu Ix Izepfx Admjhf Stage I: Spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool post Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Peržiūrėti detales

mažas skelbimas

Gent

1 421 km

įrankių frezavimo staklės
HURONNU-4

9 500 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, HURON NU-4 is equipped with various buttons, switches, and levers to control operation. Csdoriulgepfx Admohf x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle-to-table distance: 9–509 mm spindle head – swiveling: 360° spindle taper: SK 40 spindle speed range: 30 – 2066 rpm spindle speed steps: 27 feed rates: 1.6 – 820 mm/min feed steps: 27 table size: 1435 x 460 mm rapid traverse on X- and Y-axis: 2.8 m/min rapid traverse on Z-axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)

Peržiūrėti detales

mažas skelbimas

București

1 212 km

ŠLIFAVIMO STAKLĖS
KappRS 2003

Skambinti

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindel: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Cjdpfx Aehq Uigedmehf Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Peržiūrėti detales

mažas skelbimas

Portalo frezavimo staklės CORREA FOX M65

Europa

557 km

Portalo frezavimo staklės
CORREAFOX M65

Skambinti

Sąlyga: naudotas, Gamybos metai: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control HEIDENHAIN iTNC 530 HSCI Table size 7,500 x 3,000 x 300 mm Distance between columns 3,800 mm Rapid traverse x/y/z 30,000 mm/min Tool holder HSK 100 Spindle speed 6,000 rpm Gear stages 2 Motor power 37 kW Operating hours 28,475 h Spindle hours 12,629 h Tool changer 60-fold Internal coolant supply 36 bar Chip conveyor double Milling head 5-axis milling head OAD Total power requirement 80 kVA Machine weight approx. 85 t Milling head OAD fully water-cooled. - 6,000 rpm without time limitation. - The patented rotation system by Correa with fixed double toothing allows an indexing every 0.02º. As the gearing is not free-moving, maximum rigidity and precision are ensured. - Negative angles up to 45 degrees can be achieved. - Milling spindle mod. FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension mod. AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41 Chedpoxb Ed Ujfx Admjf

Peržiūrėti detales

mažas skelbimas

5 ašių apdirbimo centras + automatinė mašina GF Machining Solutions Mikron XSM600U

Vokietija

1 106 km

5 ašių apdirbimo centras + automatinė mašina
GF Machining SolutionsMikron XSM600U

60 000 €

EXW Pradinė kaina neįskaitant PVM

Skambinti

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 6 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklio modelis: Heidenhain iTNC530, veleno greitis (maks.): 36 000 aps./min, GF Mirkon XSM600U X: 800 mm Y: 600 mm Z: 500 mm A axis: +30° / -100° C axis: 360°, infinite rotation Spindle HSK50: max. 36,000 rpm, 25 kW Handwheel HR410 Tool changer: 60 positions Csdpfx Ajwa R A Nodmohf Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar through-spindle coolant (IKZ) Tool measurement: Blum Laser 3D probe: M&H Pallet automation with 21 pallets – pallets are not included in the scope of delivery The machine is offered on behalf of a customer!

Peržiūrėti detales

mažas skelbimas

Horizontalusis apdirbimo centras MAZAK Nexus 5000 II

Vokietija

1 153 km

Horizontalusis apdirbimo centras
MAZAKNexus 5000 II

Skambinti

Sąlyga: naudotas, Gamybos metai: 2010, X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 730 mm Control system: Matrix Nexus Mazatrol Main spindle: Speed range - Main spindle: 35 - 18,000 rpm Drive power - Milling spindle: 35 / 26 kW Tool holder: ISO 40 DIN 69871A Number of gearbox stages: 2 Pallet changer: Number of pallets: 6 (5+1) Pallet size: 500 x 500 mm Max. workpiece weight: 700 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Pallet change time: 7 sec B-axis (table): 0.001° Chsdpfx Adsup H Dromof Tool changer: Number of tool stations: 160 pos. Tool holder: ISO 40 DIN 69871A Max. tool diameter: 95 mm Max. tool diameter with empty adjacent station: 150 mm Max. tool length: 420 mm Max. tool weight: 12 kg Tool-to-tool change time: 2.7 / 3.2 sec Feed rates: Rapid traverse: 60 m/min Feed rate max.: 60,000 mm/min Total power requirement: 78.5 kVA Machine weight approx.: 16.4 t Space requirements approx.: 7.5 x 3.5 x 3.0 m CNC Horizontal Machining Centre MAZAK - Nexus 5000 II - Pallet changer: 6 (5+1) positions - WITHOUT tools

Peržiūrėti detales

mažas skelbimas

Horizontalusis apdirbimo centras DMG MORI NHX 5000

Bünde

1 059 km

Horizontalusis apdirbimo centras
DMG MORINHX 5000

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2014, X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 880 mm Pallet size (2x): 500 x 500 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Distance spindle center to table: 80 - 810 mm Milling spindle drive: 30 kW Maximum torque: 102 Nm Max. workpiece weight: 500 kg Max. workpiece diameter on pallets: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 sec Max. feed rate: 60,000 mm/min Rapid traverse: 60 m/min Tool changer capacity: 40 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent station empty: 320 mm Max. tool weight: 30 kg Chip-to-chip time: 4.4 - 10 sec Tool-to-tool change time: 1.95 sec Operating hours: 15,894 h Total power requirement: 46 KVA Machine weight: approx. 15 t Cedpfx Aov Htitjdmshf Space requirement: approx. 5.5 x 3 x 2.8 m Well-maintained horizontal machining center DMG-Mori, model NHX 5000, year of manufacture 2014, with Siemens 840D CNC control, two pallets, and 40-position tool changer. Indicated on-time: 23,262 h, spindle hours ONLY 15,894 h! Further data: Distance spindle nose to table center: 70 - 950 mm Pallet indexing time: 1.3 sec B-axis indexing (table): 360 x 1 degree Jog feed rate: 0 - 5,000 mm/min This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH OWN 1,600 m² WAREHOUSE

Peržiūrėti detales

mažas skelbimas

Vertikalios reversinės tekinimo staklės CKD Blansko SKJ 25/50 CNC

Sedliště

713 km

Vertikalios reversinės tekinimo staklės
CKD BlanskoSKJ 25/50 CNC

Skambinti

Sąlyga: geras (naudotas), tekėjimo skersmuo: 5 000 mm, Z ašies eigos atstumas: 2 000 mm, tekėjimo ilgis: 2 500 mm, The machine is in good technical condition, fully operational, and was modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5,000 mm, and a chuck diameter of 2,500 mm. It can accommodate workpieces weighing up to 40 tons and with a height of 2,000 mm. Cjdpfov Dkykjx Admjhf

Peržiūrėti detales

Reklamuokite čia