Lazerinio pjaustymo staklės

DNE Laser - Member of Bystronic group DNE Soar plus

Sąlyga: naujas, Įranga: apšvietimas, Take your painting process to the next level – with mobile convenience. Mobile spray booths in container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up at different job sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent the escape of paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile spray booths are a practical and flexible solution for companies that require a relocatable and effective painting system that can be transported from one job site to another. Overview of design and features Our mobile 20-foot Sapi spray containers are made with a robust steel frame and welded wall and ceiling panels. Inside, we can add special aids such as cranes or lifting devices. The floor is constructed from checker plate. Both doors feature ventilation grilles fitted with fine-pore filter mats. For safety, one door is designed as an emergency exit and includes a viewing window. It is important to note that these are not simply converted shipping containers! We manufacture all of our containers from the ground up ourselves. We use only the most durable materials that meet all requirements and have been safety tested and proven. Standard shipping containers would not meet the required safety standards. Paint extraction system in the mobile spray container The paint mist extraction wall for overspray separation is positioned in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, folded with baffles, including various suspension and fastening elements for filter mounting. The powerful and EX-protected extraction fan with drive motor is installed on a console on the outside of the rear wall of the container. Next-generation mobile spray booths: Meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must comply with the highest EU standards. The introduction of new paint systems such as water-based coatings, polyurethane resins, epoxy zinc dust paints or epoxy iron mica coatings imposes stricter requirements on existing spray booths. This is why we have developed a new and unique mobile spray booth for the next generation of coating solutions. Hfjdpfx Afsun Shge Ieb An important criterion is the transport of workpieces for painting and further processing steps. Do you need more information? Our engineers can provide expert advice and support. Whether you require dry or wet overspray separation, air humidification or air drying, low-temperature condensation drying or hot air drying, or pretreatment of workpieces by high-pressure washing with a recirculating water system, compressed air blasting, or centrifugal wheel blasting technology.

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Hjdpfsd Ixadjx Af Ijfb Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: naujas, Gamybos metai: 2024, Eine Weinbergpfosten-Rollformmaschine wird in Weinbergen und Obstplantagen zur Herstellung von Pfählen und Pfosten eingesetzt. Üblicherweise haben Rebpfosten eine Materialstärke von 1,5-2 mm. Die Produktionslinie besteht aus Abwickler, Servo-Zuführ-Richtmaschine, Presse, Stanzwerkzeug, Rollformanlage und Schere. Hjdpst Tcz Uofx Af Iofb

Sąlyga: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Hedpfot Hw Iiox Af Iofb Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, kuro tipas: dyzelinas, spalva: žalia, bendras svoris: 12 900 kg, didžiausias leistinas svoris: 3 800 kg, kėlimo aukštis: 15 740 mm, Gamybos metai: 2007, veikimo valandos: 6 100 h, mašinos/transporto priemonės numeris: Roto 38.16, Įranga: UVV saugos patikra, hidraulika, padėklų šakės, visų varančiųjų ratų pavara, Rotating Telehandler Technical Data Working height: 15.74 m Hjdetucp Tepfx Af Isfb Lateral reach: 12.98 m Slew range: 415° Length: 6.24 m Width: 2.24 m Clearance height: 2.85 m Lifting capacity: 3,800 kg Platform basket capacity: 300 kg Total weight: 12,900 kg Stabilizers: Outriggers Drive: Diesel Attachment: Forks Driving license class: 3/B Inspections/Status UVV (Accident Prevention Inspection) valid until 11/2025 Operating hours: 6,100 hrs as of 02/2024 Are you interested? We are always happy to assist you. You can reach us Monday to Friday from 7:00 am to 4:00 pm. Listed price plus statutory VAT. Subject to change and errors excepted!

Sąlyga: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. Hfodpfx Aewbil Sef Ijb ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, veikimo valandos: 11 500 h, mašinos/transporto priemonės numeris: 3098, lazero valandos: 6 900 h, lazerio galia: 10 000 W, maks. lakšto storis: 30 mm, plieno lakšto storis (maks.): 30 mm, galia: 10 kW (13,60 AG), paskutinio kapitalinio remonto metai: 2024, darbo diapazonas: 4 020 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, CNC Plate-Type Horizontal Boring Mill – Ram with Rotary Slide Table Manufacturer: SKODA / Model: W200 Base Machine Year: 1986 / Retrofit to CNC in 1999 by SKODA The machine can be inspected by appointment. Technical Specifications: Travel ranges: X-axis: 8,000 mm Y-axis: 4,150 mm W-axis: 2,000 mm Z-axis: 1,600 mm Spindle: - Spindle diameter: 200 mm - Tool taper: DIN 2080 AD, ISO 60 - Spindle speed: 0.0 - 930 rpm - Spindle drive power: 77 kW Boring Mill / Rotary Slide Table: - Make: SCHARMANN - Table clamping surface: 6,000 x 4,000 mm Hsdpfxjwxyxqe Af Iofb - V-axis: 2,000 mm - Maximum table load: 80 t - B-axis: 360°, indexing: 0.001° Accessories: - CNC control: SIEMENS Sinumerik 840 CE - Chip conveyor - ... No guarantee for completeness or accuracy of the technical data and equipment details. Subject to prior sale. A detailed technical data sheet and equipment information are available on request.

Sąlyga: nepatikrintas (naudotas),

Sąlyga: naujas, Gamybos metai: 2025, Lazerio galia: 6000W / 12000W / 20000W Tinkama medžiaga: metalas Būklė: nauja Lazerio tipas: pluoštinis lazeris Pjovimo plotas: 3000x1500 mm Pjovimo greitis: 200 m/min Palaikomi grafiniai formatai: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Aušinimo būdas: vandens aušinimas Hodjg Du Aqopfx Af Iefb Sertifikatai: CCC, CE, GS, ISO, SGS Lazerio šaltinio gamintojas: IPG / MAX Svoris (kg): 11000 kg Garantija: 3 metai Maitinimo įtampa: 110V / 220V / 380V 50Hz / 60Hz 1. Flagmanų serija Super dinaminis atsakas, lengvai apdoroja sudėtingus lakštų raštus. 2. Automatinis briaunų nustatymas Identifikuodama nereguliarios formos lakštus, briaunų paieškos laikas sumažinamas iki 3 sekundžių. 3. Automatinis antgalio keitiklis Įrenginys pakeičia pjovimo antgalį per 35 sekundes – tai sutaupo 50% laiko sąnaudų.