Platus juostinis šlifuoklis

DMC US 1350 M2

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller, 65 Shore, rigid sanding platen Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air Bdjdpjychqzjfx Af Asb 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Conveyor carpet oscillation, pneumatic Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units equipped with emergency stop device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta starting Complete documentation Note on used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in writing. (Inquiries will only be answered with your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit belt type: Cross belt 1st unit configuration: Cross belt with sanding pad 1st unit sanding pad: electronic segmented pads Abrasive belt size 1st unit: 150 x 4800 mm Drive 1st unit: kW 2nd unit: Longitudinal roller 2nd unit configuration: Steel calibrating roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: Pad unit 3rd roller configuration: Electronic segmented pressure beam SDS system 3rd unit sanding pad: electronic individually controlled pads, 32 mm wide Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed fixed: stepless 5 - 15 m/min Control: touch screen control Electr./pneumatic belt oscillation: electric Infeed height: variable (lower table adjustable) Table lift: electro-motorized Table height display: digital Working height or feed table height: 880 mm Bdsdpsxzi S Njfx Af Aob Location: Nattheim

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, lentynos ilgis 3500 mm lentynos plotis 1300 mm Bsdpfx Aoyxwzcjf Aedb 8 hidrauliniai cilindrai cilindrų skersmuo 85 mm integruotas alyvos šildymas maitinimas 380V

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Fladder brushing machine CMC Futura Bold x 2, 6 aggregates. WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATES x 4. Working width: 1200 mm, stepless feed speed adjustment with inverters. Bdsdpfsi A Ivyjx Af Asb

Būklė: labai geros būklės (naudotas), Working width 1360 mm Workpiece thickness 3 – 160 mm Abrasive belt dimensions 1,360 x 1,900 mm Variable feed speed 7 - 14 m/min Feed motor power 1.1 kW, 400 V, 50 Hz Extraction diameter 2 x 160 mm Compressed air supply 6 bar Dimensions L x W x H = 2160 x 2260 x 2025 mm Weight approx. 2200 kg 1st unit: Steel contact roller Motor power 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically time-controlled for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency stop brake Emergency stop button at infeed Bdsdjych Igepfx Af Aob Roller table extension at infeed Complete documentation Note on used machinery: • Technical data may be subject to errors and prior sale. • Prices listed are ex works - free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, with no warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We answer inquiries only if you provide your address and telephone number!)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Italmeccanica Top Finish 6T-2M machine for brushing – one horizontal shaft, two edge pins, two rotary units. Bjdpek Iu Hvofx Af Aedb

Būklė: geras (naudotas), Gamybos metai: 1990, 1x KARŠTO SPAUDIMO PRESAS FANERAI „SORMEC“ TIPO 350X130 Hidraulinis karšto spaudimo presas medienai, plokštėms, baldams, durims, kompozitams ir įvairioms medžiagoms Techniniai duomenys: Plokštės matmenys: 3500 x 1300 mm 1 naudinga darbinė plokštė Plokštės šildomos karštu vandeniu Bendras slėgis: 50 tonų Atidarymas: 300 mm 8 cilindrai, kurių skersmuo 85 mm Vandens katilas neįtrauktas Bendri matmenys: 4500 x 1600 x 2500 mm (aukštis) Svoris apie 5000 kg Naudota, geros būklės Bdjdpfxjyv Izbj Af Aeb

Būklė: naudotas, Darbinis plotis: 1.350 mm Šlifavimo agregatų skaičius: 2 vnt. Didžiausias ruošinio storis: 150 mm Bedpfx Ajyyc Drsf Aedb Daugiafunkcis paviršiaus šlifavimo automatas Heesemann MFA 6 Impression Q2 – LF tiksliam paviršiaus, faneruotės, lako ir tarpiniam šlifavimui medienos apdirbime. Mašina tinkama masyvo, padengtiems ruošiniams ir jautriems paviršiams baldų bei interjero srityse. Nuolat reguliuojama padavimo greitis ir vakuuminis tvirtinimas užtikrina švarią ir tolygią šlifavimo kokybę. Numatoma prieinama nuo 33 sav./2026

Būklė: labai geros būklės (naudotas), Platus juostinis šlifuoklis VIET S1 213 Darbinis plotis: 1300 mm Darbinis aukštis: 3-160 mm Agregatų skaičius: 2 Guminis kalibravimo velenas Bdodpfx Afjydduro Asb Kombinuotas agregatas su batu Pagrindinis variklis 15 kW (20 AG)

Būklė: naudotas, Volpato LS 1N is a universal sanding machine designed for edge, profile, and shaped part sanding of wood and other materials. It combines straightforward operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. Its robust construction and high-quality Italian craftsmanship ensure long lifespan and reliable performance even under demanding workloads. The machine features chain feed with continuously adjustable feed speed from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for uniform abrasive wear. Thanks to precisely adjustable pressure of the hold-down shoe, it allows both fine contour sanding and accurate calibration. Technical Specifications Bdsdpfsxlqutex Af Asb Sanding Belt Belt size: 2450 × 80 mm Aggregate tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Aggregate tilt: 0–180° Rotation speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Aggregate tilt: 0–90° Rotation speed: 0–6000 rpm (with inverter) Motor: 4 kW Shaft diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed Type: chain feed with rubber pads Feed speed: 4–20 m/min (stepless adjustment) Dimensions and Weight (model LS 1N) Length: 2450 mm Height: 1400 mm Depth: 1900 mm