Ritinio tiesinimo mašinos

Dimeco straightener 800 x 1 mm

Sąlyga: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Fgodpfxocxxx Ro Admjk Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Sąlyga: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Fgsdpfxecdrmmo Admok Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Galia: 3,92 kW be valdymo

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 06 61 218, Ref. no.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine no.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Coil inner diameter: approx. 450 to 520 mm Coil outer diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Expansion of the carrying segments is manual using a hand crank via joints. Number of carrying segments: 3 Coil side guidance by robust clamping limit arms. Decoiler stand built in sturdy box-section as welded construction. Additional Equipment: Shutdown “Loop too small” via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guidance at the base housing of the loop control, with lateral guide rods. Pass-through width infinitely adjustable. Fedpfxeg U Utvs Admogk

Sąlyga: geras (naudotas), Gamybos metai: 1999, Uncoiling and Straightening Combination Fgodpfx Adohuwacomok SOPREM BRH 7-200-80U-1250 BAP Strip width: max. 200 mm Coil weight: max. 1,250 kg Expansion range: approx. 380 to 430 mm Coil outside diameter: max. 1,300 mm Strip thickness: approx. 0.8 to 3 mm Working direction: from right to left

Gamybos metai: 2009, Sąlyga: naudotas, Material width 320 mm Material thickness 8 mm Fgjdep U Uwispfx Admjk Number of straightening rollers 9 Material cross-section 2000 mm² Machine weight approx. 4.2 t Space requirement approx. 2000x2000x2400 mm

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), The Coiltech Decoiler Straightener Feeder System is a compact feed line for presses. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rolls: 7 x 115 mm, decoiler load capacity: 6,000 kg, inner diameter (min-max): 470–520 mm. Connected load: 7.5 kW; supplied with documentation. Fodpsi El Ucsfx Admsgk

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, tiesinimo volelių skaičius: 7, ritės svoris: 4 000 kg, ritės išorinis skersmuo: 1 500 mm, padavimo velenėlių skaičius: 2, tiesinimo volo skersmuo: 80 mm, ritės plotis: 600 mm, Decoiler Type: MS 4000 Coil weight: max. 4,000 kg Strip width: max. 600 mm Coil diameter: max. 1,500 mm Expansion range: 475 – 535 mm Features: • Hydraulic expansion • Hydraulic pressure arm from above with hydraulically driven roller • Swivable front guide roller, rear support disc, and three additional individually attachable guide arms • Electric motor drive of the decoiler drum, controlled via light sensor • Decoiler hydraulically traversable • Coil lifting table Straightening Machine Type: MR 58 Strip width: max. 600 mm Strip thickness: 0.8 – 3.6 mm at 400 N/mm² strength Fgjdpfx Adeq A Tw Rjmek Number of straightening rolls: 7 units, supported Number of feed rolls: 2 units Roller diameter: Ø 80 mm Speed: 5 – 30 m/min Features: • Rolls hardened and ground • Pneumatically liftable feed roll • Straightening rolls adjustable as a block • Lateral strip guide at machine inlet, manually adjustable via hand crank • Hydraulic strip threading aid (support table, extendable tongue, and pressure roller from above) • Straightening head can be opened • Ultrasonic sensor for loop control • Swiveling control panel • Siemens S7-200 control system

Sąlyga: naudotas, Gamybos metai: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Weight of straightening machine: 2 t Fgodpfet Hmk Tex Admjk Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Weight of decoiler: 1.3 t Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Drive: Servo motor Maximum strip width: 300 mm Strip thickness: 0.5 – 4.0 mm Maximum cross-section: 1,200 mm² Feed length: 0 – 9,999.9 mm Fgjdpfx Ajr H Dwiedmjk Accuracy: ±0.05 mm Roll diameter: 80 mm The feed rollers are hardened and ground. The upper roller is lifted pneumatically via cylinders and valves to facilitate strip insertion. The contact pressure of the upper roller is pneumatically controlled by short-stroke cylinders. The upper roller features a torsionally rigid bearing, preventing unilateral roller pressure. Off-center strip transport is permitted. A feed roller basket, an adjustable strip side guide, and a strip end sensor on the entry side are all included as standard features. Protective covers are fitted to the feed rollers and drive components. The intermediate ventilation feature can be switched on and off.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, tiesinimo volelių skaičius: 7, ritės išorinis skersmuo: 1 400 mm, ritės vidinis skersmuo: 508 mm, volelio skersmuo: 80 mm, padavimo velenėlių skaičius: 2, padavimo volo skersmuo: 80 mm, tiesinimo volo skersmuo: 80 mm, ritės plotis: 400 mm, keliamoji galia: 3 000 kg, 1. Ritė (Haspel) Gamintojas: Dimeco Tipas: 2371 E-FPS Pagaminimo metai: 2006 Keliamoji galia: maks. 3 t Juostos plotis: maks. 600 mm Išsiplėtimo diapazonas: 470 – 530 mm Ritės išorinis skersmuo: maks. 1.400 mm Įrengta su: Fgsdpfotgvgpox Admjk • Hidrauline išsiplėtimo sistema • Pneumatiniu viršutiniu prispaudžiamuoju voleliu • 6 vnt. juostos ribojimo svirčių • Pneumatiniu diskinio tipo stabdžiu 2. Tiesinimo staklės Gamintojas: Dimeco Tipas: 1676 C-VV Pagaminimo metai: 2000 Juostos plotis: maks. 400 mm Juostos storis: 0,8 – 4,5 mm Tiesinamųjų volelių skaičius: 7 vnt. Įtraukiamųjų/ ištraukiamųjų volelių skaičius: po 2 vnt. Volelio skersmuo: 80 mm Įrengta su: • Dažnio reguliuojamu pavara • Hidrauline juostos įvedimo pagalba su padėjimo stalu, įvedimo liežuviu, viršutiniu prispaudžiamuoju svertu • Pneumatiniu atidaromu įtraukiamuoju voleliu • Šoninėmis juostos gairių voleliais • Pneumatiniu pasukamu perėjimo stalu tarp tiesinimo staklių ir padavimo įrenginio