Iškrovimo juosta Kampinis transporteris Magnetas

die magnetprofis 2023011201

Gamybos metai: 2023, Sąlyga: naujas, Aluminium angled conveyor belt with substructure Including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,750 mm Inclined section: 3,200 mm Incline angle at the bend: 45° Total conveyor belt length (measured on the ground): 6,000 mm Discharge height: 2,500 mm Height of horizontal section: 250 mm Design: Aluminum construction - Reinforced two-times profile 90x45 mm Drive and return drum made from S235 steel, welded and machined Ø100x520 mm crowned and turned, shaft fixed with bearing units. Drive: Shaft-mounted geared motor 0.55 kW, speed 0.3 m/sec Connection 230/400 V, 50 Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) Ffjdpfx Asht Uzaob Sst PVC conveyor belt DM 10/2 0+005 PVC incl. PVC corrugated sidewalls, green Belt width: 500 mm 2 pcs. 40 mm high, 35 mm wide corrugated sidewalls, high frequency welded 46 pcs. T-40 cleats, approx. 300 mm spacing Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on each side by 3 hold-down rollers. The belt is manufactured with a 70 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 290 mm, as follows: (Top view) Crosswise arrangement 70+35+290+35+70 mm Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop tailor-made, individual solutions and deliver systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application. Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 22 kW (29,91 AG), bendras svoris: 2 600 kg, Gamybos metai: 2006, Cutting unit width: 600 mm Cutting unit length: 1,200 mm Shaft center distance (between knife shafts): 250 mm Knife shaft rotational speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Total drive power: 22 kW Ffodpfx Abstzbvys Sst Weight: 2,600 kg

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Superior compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Ffedpfx Absixt I He Sot Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 14 900 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 33 000 kg, galia: 264 kW (358,94 AG), sukimosi greitis (min.): 70 aps./min, įėjimo įtampa: 400 V, Slow-running, robust single-shaft shredder Suitable for the pre-shredding of a wide range of materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or compacted in bales. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: As requested by the customer (mm) Control cabinet: complete (with ABB frequency inverter) Working opening: 2135 x 1750 mm Feed volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 87 rpm (at 50 Hz) Ffsdpsv S Hyvsfx Ab Sot Number of rotor blades: 84 pcs Blade dimensions: 172 x 57 x 28 mm Counter knives (bottom): 6 pcs Scraper comb (top): 6 pcs Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions (LxWxH): 5500 x 3050 x 3100 mm, with hopper H=4880 mm Delivery time: immediately Two discharge conveyors available as an option.

Sąlyga: labai geros būklės (naudotas), Az alábbi Gránit-Mill 90 fa pelletáló préseket kínáljuk eladásra a képeken látható állapotban, a pelletáló üzem leállását követően. A gép magyar gyártmány, cégünk kiváló kapcsolatot ápol a gyártóval, így az alkatrészbeszerzésben is segítséget tudunk nyújtani. A hajtás és a matrica kezelése hasonló a régi CPM gépekhez. A prések (fenyő alapanyaggal) présenként 1,2-1,5 t/óra teljesítményre képesek. Ár: €29 900/db €49 900/2 db prés Az ár tartalmazza: - előtartály - vezérlőszekrény - adagolócsiga - állandó mágnes - kondicionáló - prés - motorok - előtartály motor 1,1 kW - adagoló motor 1,5 kW - kondicionáló motor 15 kW - asztalforgató 0,55 kW - főmotor 90 kW - 3 matrica (mindhárom La Meccanica gyártmány) - alig használt - fenyőhöz 6 x 45 mm furattal - 2 garnitúra (összesen 4 db) rovátkás palást - pótalkatrészek - csavarok - anyák - törőszeg - szerelési segédanyagok Állapot: Fedpep T Twuofx Ab Sjft A motorok és hajtások épek. Mindkét gép kipróbálva. A jobb oldali gép nyakcsapágyának cseréje ajánlott. Kisebb alkatrészek (például pelletvágó) cserére szorulnak. Vízellátás nincs, de a helye ki van alakítva. A kenés jelenleg kézi, de a központi kenés könnyen telepíthető. Összegzés: A bal oldali gép azonnal üzembe helyezhető. A jobb oldali kisebb szervizt igényel. Igény szerint, előre egyeztetett időpontban a gép próbája megoldható. Nem üzemel jelenleg, felkészítést igényel. Az előállított pellet mechanikai szilárdsága és térfogatsűrűsége helyben ellenőrizhető!

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3815407, WEIGHT 8000 KG FEM ISO 1Am M4 KW 2.4/15.5 (50 Hz) Ffjdpfxet Nhqyj Ab Set MAXIMUM CAPACITY 16 TON

Gamybos metai: 2018, Sąlyga: naujas, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400 mm Fjdpfx Asd Dy S Djb Sjft ===== 4x lifting eye bolts for suspension Rubber belt GB30 Magnet dimensions: 1200 x 500 mm

Sąlyga: naudotas, Feed opening: 1200 x 1600 mm Fjdpfjbq Stqjx Ab Seft Drive: 110 kW, without gearbox Rotor diameter: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen design: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter-knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Sąlyga: naujas, Gamybos metai: 2024, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the drag floor. Bales are placed on the drag floor and the cutter head’s feed is activated. The tines on the cutter head tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: Capacity: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill, kW of the straw mill). Without the straw mill, the bale breaker can even dissolve up to max. 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Cutter head motor: 5.5 kW, 380 Volt Drag floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Extra charge for larger straw shredder (18.5 kW) + €3,940 net Technical Data, MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts (options: 10, 12, 15, 22, 30, 45 mm hole size) With star-delta switch, overload protection, and 8m supply cable ready to plug in Discharge spout: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at Extra Cost: Feed auger + €970 net Cyclone (to be mounted by customer; should be max. 10 m away) + €2,970 net Simple filter €1,750 net --- Further Options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (for pressureless material discharge) + €5,750 net Control system: from €1,620 net Special dissolver extension 3 m (other dimensions on request) + €9,750 net Briquetting press MPP 180 S; lightly used demo unit 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for loosening round and square bales of hay and straw. The shredder attached to the bale breaker processes straw from all types of grain, hay, corn, and miscanthus. muetek machines of the MHZ/MHB series are characterized by a robust design and a heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed using a front loader. The support can be adjusted according to the type of bale. The chain conveyor feeds the bale against the milling rotor; the feed speed is adjustable. The milling rotor is equipped with several teeth that tear apart the straw bale. The separated straw is discharged. --- As a rule, the machines are suitable for dry input materials: - Straw - Hay --- Ffodpfx Aeb Nulhsb Sst The processing of hemp is only possible with a special dissolver. Extra cost approx. €9,720 net, depending on version. The shredder cannot process hemp with the straw mill. Requirements for the input material: Maximum moisture content 12%.

Gamybos metai: 2021, Sąlyga: naujas, Complete solution for conveying bulk materials and demetallizing magnetic metal contaminants. Aluminium incline conveyor including base frame Incline start section at ground level (adjustable) Discharge height 1,800 mm (adjustable) Design: height adjustable Frame includes suspension for overband magnet separator DMPM1200 Conveyor belt width 500 mm (adjustable) We supply our conveyors with PVC, PU, or rubber belts. PVC conveyor belt with carriers and waved edge Drive: 0.25 kW motor (adjustable), speed 0.3 m/sec Connection: 220/240 V, 50 Hz, IP54 protection rating Drive, etc., pre-wired, motor control optional 6x adjustable machine feet for leveling Waved edge: 40 x 35 mm T-20 cleats – 400 mm pitch 2-ply, especially cross-stable Our core competence is delivering exactly what the customer actually needs. We work together with our customers to develop tailored, customer-specific solutions and deliver the corresponding systems from our own production. Please feel free to contact us by phone as well, to find the right solution for your application. Ffedpfjhh A Iysx Ab Sot Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separator, block magnet, filter systems