Įpurškimo liejimo mašina

DEMAG System 800/1120-9500

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Hsdpfjyugctox Ab Ssfd Clamping Unit Clamping force: 8,000 kN Platen dimensions (H × V): 1620 × 1500 mm Tie bar clearance (H × V): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions & Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system, which significantly increases energy efficiency for hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the rotational speed to the actual demand during the production cycle. As a result, electrical power is only consumed when the machine actually requires it. Key Benefits: - Up to 30% reduction in electrical energy consumption - Hydraulic pump servo drive technology - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Available for retrofit on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production performance.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we offer one of our pre-owned injection moulding machines for sale here. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Distance between tie bars (h x v): 900 x 800 mm - Maximum mould opening distance: 1170 mm - Minimum mould installation height: 480 mm - Opening stroke of platen: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical parameters - Pump connected load: 90 kW - Heating capacity: 44 kW Weight & Dimensions - Net weight: 25.8 t Hodpfx Abonh Rnue Sjfd - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As standard, we supply this machine in fully functional, basic condition. Additionally, as the original manufacturer, we can provide various options depending on individual requirements, such as: - Energy optimisation upgrades - Possible integration with KraussMaffei digital products - Plasticising unit conversions - Optional: organisation and handling of delivery (not included in the price) - Optional: setup and commissioning (not included in the price) With us, you benefit from first-class service and also have the option to purchase desired spare part packages for wear parts—ensuring seamless production with your newly acquired used machine. Don’t hesitate to get in touch with your enquiry today!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Hedpfx Ajwy U E Ueb Sefd Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical & hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions & weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (ancillary equipment)

Būklė: naudotas, Technical Details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubricating unit (LxWxH): 830 x 650 x 1000 mm Dimensions machine approx. (LxWxH): 3.3 x 1.5 x 1.45 m Dimensions control cabinet (LxWxH): 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically and hydraulically controlled universal spring coiling machine for the production of right- and left-handed tension and compression springs as well as torsion springs. Springs can be produced with any desired pitch and coil body shape. Output max. 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length unlimited, feed speed = 27 - 80 m/min. Coiling unit: Two-finger system, wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire intake 3 mm, two-finger Spring length measuring device LION PRECISION-PANTHER Wire reel holder POST, motor-driven, mandrel Ø 1,400 mm Lubricating unit Control cabinet cooler RITA Hydraulic power unit A wide range of accessories and/or spare parts available on request! Hedpsvc Aklefx Ab Sefd i.D.

Būklė: geras (naudotas), Gamybos metai: 1999, Tiltinis kranas, kranas, elektrinis lyninis keltuvas, rankinė pavara, riedantis vežimėlis, krano vežimėlis, katės bėgiai, krano važiavimo mechanizmas, važiavimo vežimėlis, laikantis vežimėlis, pakabinamos trasos važiuoklė - Gamintojas: Stahl, krano važiavimo mechanizmas su elektriniu lyniniu keltuvu - Keltuvas: Tipas AS 3016-16 2/1 - Keliamoji galia: 3200 kg - Pagrindinis kėlimas: 8 m/min - Precizinis kėlimas: 1,35 m/min - Važiavimo pavara: FA-C 3728 133-1 Hfjdpfx Abotlzdqs Sjd - Važiavimo greitis: 5/20 m/min - Ratų atstumas: 1400 mm, matmenys žr. nuotraukose - Būgno greitis: 16,0 / 4,0 m/min - Kiekis: 1 vienetas krano važiavimo mechanizmo - Kaina: už vienetą - Transportavimo matmenys: 1670/1200/H470 mm - Svoris: 462 kg/vnt.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, veikimo valandos: 33 107 h, Funkcionalumas: visiškai funkcionalus, Top machine from cleanroom production (pharmaceuticals) - With rotary table, 820 mm - With GEKU robot SR 500 ST (X=600 Y=1400 Z=2500 mm) - Only 33,107 operating hours - Protective enclosure / safety cage - Horizontal conveyor belt - Hardly any paint damage / nearly as-new optical condition - Fully functional The machine can be inspected under power by prior arrangement Technical Data Manufacturer: Engel Type: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions (L/W/H): see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Shot volume: 79 / 38 cm³ Clamping force: 1,300 kN / 130 t Tie bar spacing: tie-bar-less Ejector stroke/force: 61 kN / 100 mm Clamping unit: hydraulic Motor output: to follow Heating capacity: to follow Total connected load: to follow The machine is available immediately from our warehouse in Hannover, Germany and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) GEKU Robot SR 500 ST Protective enclosure / safety cage CC 200 control - German/English language GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm vertical Z axis: 2500 mm horizontal A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not fitted Warranty Warranty up to initial commissioning Hfedsub Umqopfx Ab Sjd Loading/Shipping Free loading onto buyer's truck or free delivery (ex-works) against freight cost reimbursement from our warehouse in Hannover, Germany Financing - on request - lease-purchase option Price on request

Būklė: naujas, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° right: 230 mm square 45° right: 220 x 220 mm flat 45° right: 230 x 150 mm Hsdpfx Aeiqt Rlsb Sjfd round 60° right: 140 mm square 60° right: 140 x 140 mm round 45° left: 200 mm square 45° left: 175 x 175 mm flat 45° left: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions (LxWxH), approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideally suited for cutting pipes, profiles, and solid material such as stainless steel, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration operation - Two selectable blade speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy workpiece clamping - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade 2925 x 27 x 0.9 mm - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Machine base

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1,620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1,779 cm³ Injection pressure: 1,855 bar Hfsdjva H Amepfx Ab Sod Platen dimensions: 1,300 x 1,200 mm Type: Horizontal Drive: Hydraulic

Būklė: geras (naudotas), Gamybos metai: 1992, Offer 23426 Hfsdpfxsrl Irvs Ab Sod Technical data: - Cutting capacity at 90° round: 420 mm - Cutting capacity at 90° flat: 635 x 290 mm - Cutting capacity at 45° round: 360 mm - Cutting capacity at 45° flat: 420 x 300 mm - Saw blade dimensions: 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds: 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vice - Cutting pressure continuously adjustable: 0 – 10 m/min - Total drive power: 400 V / 2.2 kW - Coolant system - Machine is mounted on a swiveling chassis - Powered infeed roller conveyor: 4000 mm - Outfeed roller conveyor with length stop: 6000 mm - Space requirement: approx. W 2500 x H 1400 x D 1100 mm - Machine weight: approx. 950 kg - Roller conveyor weight: 2000 kg

Būklė: naudotas, Drilling capacity in steel (diameter) / mm Throat (distance from spindle to column) / mm Workpiece height - max. / mm Total power requirement / kW Machine weight approx. / t Space requirement approx. / m Table dimensions: 800x800mm Height: 590mm Hedpfx Abeud Ttnj Ssfd