Liejimo mašinos iki 5000 KN

DEMAG Ergotech 1250-610

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Minimum/maximum mould height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Gbedpsu E E Suofx Acysi Shot weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Shot weight: 97 g/PS Control system: SELGOCIA Features: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, Manufacturer: KUKA, Model: KR 16 Wikut, Year: 2010 - Conveyor belt - Safety fence

Būklė: naudotas, Gamybos metai: 1989, veikimo valandos: 74 900 h, spaudimo jėga: 850 kN, varžto skersmuo: 40 mm, bendras svoris: 3 700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Gsdpfxor Hrqro Acyebi Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Host computer, handling, air blast, sorting gate, hydraulic core pull 1, mold temperature control 3 zones. The following accessories etc. are included with the machine: Complete 50 mm thermoplastic injection unit, sorting gate, hydraulic infeed conveyor (height-adjustable in 3 steps, integrated into the control), external disk drive (Arburg original), documentation and machine service reports from Arburg, machine setup course documentation (folder), electrical schematic, documents also available in digital form, oil filling (must be pumped into a container prior to transport—pump is included), electronic water manifold.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1,620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1,779 cm³ Injection pressure: 1,855 bar Gbjdpfx Aceva H Amsyji Platen dimensions: 1,300 x 1,200 mm Type: Horizontal Drive: Hydraulic

Būklė: naudotas, Gamybos metai: 2021, spaudimo jėga: 120 kN, darbinio tūrio: 36 cm³, įpurškimo slėgis: 2 200 juosta, bendras svoris: 5 400 kg, darbo valandos: 3 500 h, sraigtinio konvejerio skersmuo: 22 mm, Pristatymo sąlygos: iš vietos Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma Gedpsxwy Utefx Acysbi

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Gbsdpfx Acjuiykdeyei

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Gsdpfowy U E Uex Acyebi Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical & hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions & weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (ancillary equipment)

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 113 kW (153,64 AG), aušinimo tipas: vanduo, bendras svoris: 943 kg, bendras plotis: 2 100 mm, bendras ilgis: 2 270 mm, bendras aukštis: 1 330 mm, šildymo galia: 117 kW (159,08 AG), Įranga: kompresorius, Naudotas Carrier 30 RQS 120 oro aušinamas šilumos siurblys / aušintuvas su R410A šaltnešiu. Komplektuojamas su 3 Copeland ZP182KQE-TFD-604 slenkamųjų kompresorių, sustiprintu šilumokaičiu, Carrier PM 100-110mm ventiliatoriumi - 50 Hz - 0,53/0,18 kW - 720/500 aps/min, Mecasem OOPSG001171100C imtuvu, kurio talpa 23,5 litro, ir elektronine valdymo spinta su Carrier Pro-Dialog+ ekranu. Specifikacijos Markė: Carrier Tipas: 30 RQS 120 Produktas: Vandens aušintuvas / Šilumos siurblys Šaltnešis: R410A Svoris: 943 kg Matmenys: 2270x2100x1330 mm (I x P x A) Kompresoriai: 3 Copeland ZP182KQE-TFD-604 Ekranas: Carrier Pro-Dialog+ Gbodsrlk E Nopfx Acyji Ventiliatorių skaičius: 2 Ventiliatorių specifikacija: 50 Hz - 0,53/0,18 kW - 720/500 aps/min Pagaminimo metai: 2013 Kiekis sandėlyje: 1

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 62 235 h, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 70 mm, bendras svoris: 25 100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Technical specifications at a glance: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal structure - Removal cell with machine enclosure - Cardboard feeder - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This construction also offers advantages for automation, as robots and peripheral devices can be more easily integrated. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the need for cooling water. Godpfx Aovxzw Nocyobi Additionally, the machine includes a dosing device from MORETTO and a linear handling system from ENGEL, which support production automation and enhance overall productivity. With a total of 62,235 operating hours, the machine is in a used but functional condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 650W500V/200HL. 2F 2-component machine Godpfxjgrafve Acysbi - Tie-bar-less - 2,000 kN clamping force - Screw diameter unit 1: 45 mm, unit 2: 45 mm - Max. shot volume unit 1: 226 cm³, unit 2: 183 cm³ - Mould installation dimensions: min. 250 mm, max. 750 mm - Year of manufacture: 1998

Būklė: naudotas, Gamybos metai: 2017, spaudimo jėga: 550 kN, darbinio tūrio: 1 239 cm³, įpurškimo slėgis: 1 990 juosta, bendras svoris: 21 000 kg, darbo valandos: 21 636 h, sraigtinio konvejerio skersmuo: 70 mm, Pristatymo sąlygos: iš vietos Pristatymo laikas: pagal susitarimą Gedjx E A Tqspfx Acyebi Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma