Demaginis keltuvas DCMS-PRO1-125 1/1 H2,8

Demag DCMS-PRO1-125 1/1 H2,8 VS0,15-30

Sąlyga: naujas, Power Feeder - 4 rollers - Roller diameter: 120 mm - Roller width: 60 mm - Motor power: 0.75 kW - Pole-changeable motor - Speed: 1,400 rpm - Feed speed: 3 – 18 m/min, variable - Approximate weight: 37 kg WITHOUT stand ‘Standard’ or ‘1050’ stand optionally available Djdpfeh Dikwex Admjwf Notice for Used Machines: • Technical information is subject to error and prior sale. • Prices quoted are ex-works and include loading! • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty whatsoever. Buyers are free to inspect the machines at our location. • Special agreements are valid only in written form. (We only respond to inquiries that include your address and telephone number!)

Gamybos metai: 2024, Sąlyga: naujas, The world’s flattest timber frame assembly table = 3 cm! Delivered without timber boards. Text line break with the following specifications: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 rack-and-pinion clamps - 14 adjustable end stops - 14 interchangeable outside wall pressure plates - cordless impact driver - bit adapter - 50 dowels MMS 10x70/5 - hammer drill bit 8x165 Dodpob Nrbnofx Admowf Dimensions: Clamping length: 0 to 3,550 mm Hole grid: 140 mm With a board width of 1,250 mm = table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke: 340 mm End stop height: 100/160 mm This assembly aid was developed to enable precise production of timber frame construction elements. Special attention was paid to space requirements and price. Thanks to the extremely flat design, the area can be repurposed for other uses simply by removing the clamps and stops. This is a significant advantage not just for small companies, but also for operations of all sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board to be provided and installed by the customer. At the edges, approach ramps can be attached using the same boards. The resulting surface can be driven on by heavy vehicles or used as storage space. This means the area needed for timber framing is only activated when required. All steel parts are galvanised. Full assembly is carried out by the customer. After adjustment, the end stops must be pinned, otherwise they may be shifted by the force of the clamps. Packed in wooden crates, ready for EU shipping. Delivery free to your door within Germany. Made in Germany. For further technical data, please refer to the brochure.

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), tiltiniai kranai, 19 m tarpas, 2 vnt. po 20 tonų ir 3 vnt. po 16 tonų, kėlimo aukštis 10 metrų Dwedpfx Asw S D Uusdmof

Sąlyga: geras (naudotas), NC Rotary Table with Motorized Drive Infinitely Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Total Height: 319 mm T-Slots: 7 pcs T-Slot Size: 22 H7 mm Dwsdpfxsfr Ih Dj Admsf T-Slot Spacing: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optionally available with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in the sector of machining and milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernizations

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, X ašies eiga: 6 000 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 1 600 mm, Gamintojas: ZAYER, Tipas: 30 KCU 6000-AR Pagaminimo metai: 2013 Serijos Nr.: 77257 5 ašių -45° universali galva Dedpew U E Unjfx Admjwf - Tiesi galva Judėjimo eiga (X/Y/Z) apie 8000/3500/1600 mm, Įrankio laikiklis SK50 8 vietų įrankių keitiklis Valdymo pultas HEIDENHAIN iTNC 530 Drožlių konvejeris TECNIMETAL Aušinimo agregatas EURO COLD Stalinis DEMMELER Aušinimo skysčio sistema Apsauginė tvora su šviesos užtvara LENZE

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9914346, 3-axis CNC + 1-axis pneumatically controlled vertical floor-type machining center 3 axes (X, Y, Z) controlled by CNC + 1 axis controlled pneumatically. Suitable for machining aluminum and PVC profiles. The workpieces are clamped using 4 pneumatically operated clamps, which slide along a tilting beam; the beam offers a ± 90° rotation range with pneumatic control. Working section: 200 x 170 mm (YxZ). Dwjdpjwgm Sgefx Admof View technical data X-axis travel mm: 3160 X-axis positioning speed m/min: 60 Y-axis travel mm: 360 Y-axis positioning speed m/min: 30 Z-axis travel mm: 345 Z-axis positioning speed m/min: 30 A-axis rotation °: 45 - 90 - 45 Electric spindle power kW: 3.8 Tool holder taper: ISO30 Maximum spindle speed rpm: 18,000 Cooling system: Air Weight kg: 1,800

Gamybos metai: 2023, Sąlyga: naujas, - Modern ergonomic design - Manual testing sequence with analog gauge (reading accuracy 0.2 HR units) - Easy operation and rapid testing procedure - Test space height approx. 185 mm - Test space depth approx. 160 mm - Dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - V-block support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16" ball holder with ball Dwjdpfxopbbc Hs Admof - 120° Rockwell diamond indenter - Spindle guard - Accessory case

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Dwodpfok Egrpox Admef Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 127802131, Other options and accessories Notes Concrete batching plant Frumcar EBA 1700 Year: NEW - 4 aggregate bins of 25 m³ each - Capacity: 70 m³/h - Mixer volume: 1.67 m³ / 2250 liters - K2 portable computer system - Screw conveyor for cement - 55 ton cement silo - International assembly included - 2 year warranty This offer is non-binding and subject to prior sale, errors, and omissions. Only the specific agreements in the order confirmation or the purchase contract are valid. More machines and mixing plants available on our website Dwjdpjhd I Trjfx Admof Further information Field of application: Construction Suitable material: Concrete

Sąlyga: naujas, Gamybos metai: 2024, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, Pilnai automatinės arba pusiau automatinės CNC vamzdžių lenkimo ir pjovimo staklės. Vamzdžių skersmuo nuo 6,0 iki 150,0 mm. CNC lenkimo, siaurinimo ir pjovimo staklės, galima individuali konstrukcija. Nauji įrenginiai sandėlyje pardavimui. Paskelbta kaina galioja 2,5 colio vamzdžio type60nc lenkimo staklėms. Dedpfx Aovl S Dgodmjwf