Elektrinis-hidraulinis kompaktiškas kranas

Zallys Just Lift 250 - 750

Gamybos metai: 2007, Sąlyga: geras (naudotas), ■ V600 Bohrmaschine (fahrbarer Bohrschrank, ausgestattet mit 1 horizontalen Bohraggregat und automatischem Werkzeugwechsler) ■ Bohrtisch mit Stromschiene, Länge 15 Meter, effektive Länge 12 Meter ■ Hard- und Software (inklusive VACON 110 Maschinensteuerung) ■ Sicherheitseinrichtungen (Sicherheitsstoßfänger) Laedpfx Adeq Hgg Us Tsi ■ Baujahr 2007

Sąlyga: naudotas, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar Capacity: 205 mm Workpiece Clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece Clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of the spindle head) Tool Turret (X/Y/Z): Technology: 12-station turret Tool Interface: BMT 75 Driven Tools: 3,000 rpm, 7 kW, 83 Nm Travel in X/Y/Z: 340/160/3,250 mm Rapid Traverse in X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill, dragged tailstock Stroke: 150 mm Taper: MT5 Equipment/Accessories: Chip Management: Chip conveyor Coolant Management: High-pressure coolant pump (IKZ) Tool Measurement: Measuring arm, Renishaw RP3 Oil Mist Extraction: Mechanical separator, manufacturer AR Filtrazioni ARNO 3VF YF Ledjwt Iwqepfx Ad Tjai Shaft Machining: Manual steady rest, ø150-300 mm Tool Holders: Various fixed and driven holders Setup Operation: Electronic handwheel Additional Features: Automatic door (pneumatic), transformer, oil skimmer Other Accessories: Various jaws and EWS quick-change adapters

Sąlyga: geras (naudotas), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping speed: approx. 2000 m³/h Condition: Fully overhauled Warranty: 12 months Lajdsdnv D Sopfx Ad Tei (Image similar)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Turning-milling center Takisawa TMM 250 3, year 2016, Fanuc Turning length: 1300 mm Turning diameter: 350 mm Max. spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Ledpert Ip Nsfx Ad Toai Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool turret with Y-axis (260 mm travel) and B-axis (230° / +/- 115°) Complete with 30-station tool changer Lower tool turret: 15-position turret – all positions driven Full simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool stations Workpiece magazine, right side of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to high administrative expense (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Sąlyga: naujas, Gamybos metai: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a rising processing container floor with integrated separation. It is equipped with an easily interchangeable screening unit and delivers high process efficiency thanks to its integrated drop-off step. Emptying and separation are performed via the integrated flap (manual/pneumatic). Upon request, reinforced suspension and a more powerful motor can be fitted for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The EVP-RA 550 can be linked to other machines via its lateral discharge. The system can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are renowned for their durability and longevity, owed in part to the hot-cast polyurethane lining of the processing container. Technical Data: - Gross volume: 550 l - Channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm Lajdpfon Ut Uvsx Ad Toi - Internal drum diameter: 1,400 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The equipment shown in the images may include accessories available as optional extras for an additional charge. If you are interested, we look forward to hearing from you. We are happy to provide consultation—without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations take place via telecommunications (e-mail, telephone, messaging portal). As the first step, we will send you a non-binding quote, which will include our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase or contract is concluded.

Sąlyga: naujas, Gamybos metai: 2025, The EVP-RA 350 vibratory finishing machine from ERBA features a rising processing bowl floor with integrated parts/media separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the integrated drop-off step. Discharge and separation are performed via the integrated flap (manual or pneumatic actuation). Upon request, the machine can be fitted with reinforced suspension and a higher-performance motor for heavier loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines thanks to its lateral discharge system. The machine is also available with a fully-automatic PLC control system (optional). ERBA vibratory finishing systems are renowned for their durability and longevity, which is largely attributed to the hot-cast polyurethane lining inside the processing bowl. Technical data: - Gross volume: 385 L - Working channel width: 340 mm - Imbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,200 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are available separately at additional cost. Lajdpsn Ut Ursfx Ad Tei If you are interested, we look forward to hearing from you. We would be pleased to advise you in a non-binding manner. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). Initially, you will receive a non-binding offer, which also includes information on our general terms and conditions, imprint, and cancellation policy, before any purchase or contract is concluded.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, Allgemeine Daten Abmessungen Breite 6000 mm Abmessungen Tiefe 7000 mm Abmessungen Höhe 3000 mm Maschinengewicht 12200 kg Steuerung Hersteller HEIDENHAIN Modell TNC 426 Hauptantrieb Drehzahlbereich der Spindel 8000 U/min Spindelmotorleistung 15 / 10 kW Werkzeugaufnahme SK 50 Anzahl Achsen 4+1 Verfahrwege X-Achse Verfahrweg 1250 mm X-Achse Eilgang 40 m/min Y-Achse Verfahrweg 880 mm Y-Achse Eilgang 40 m/min Z-Achse Verfahrweg 800 mm Z-Achse Eilgang 40 m/min Tisch Anzahl T-Nuten 9 Tischbelastung 2000 kg Werkzeuge Anzahl Stationen 30 Maximales Werkzeuggewicht 20 kg Lasdpewygn Ijfx Ad Tji Maximaler Werkzeugdurchmesser 110 mm Maximale Werkzeuglänge 420 mm Medien Späneförderer Ja Zusätzliche Ausstattung Dokumentation Kühlmittelsystem Hochdruck-Kühlung (40 bar) Kühlung durch die Spindel Elektronisches Handrad 90° schwenkbarer Fräskopf (H/V) 30-fach Werkzeugmagazin Messtaster M&H RMP 2000 Hydraulikanlage Ölnebelabsaugung Diese 5-Achs-Fräsmaschine DECKEL MAHO DMU 125 P hi-dyn wurde im Jahr 2000 gebaut. Sie verfügt über eine Heidenhain TNC 426 Steuerung, einen schwenkbaren Fräskopf sowie einen NC-Rundtisch mit 360° B-Achse. Die Hauptspindel bietet bis zu 8.000 U/min bei einer Leistung von 15 kW. Zum Lieferumfang gehören ein 30-fach Werkzeugmagazin und eine Hochdruck-Kühlmittelanlage. Wenn Sie hochwertige Fräsleistungen suchen, sollten Sie die DECKEL MAHO DMU 125 P hi-dyn in Betracht ziehen, die wir aktuell zum Verkauf anbieten. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Fräsen

Gamybos metai: 2012, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: ENOG, DEMAG KBK crane runway (crane track), approx. 8x4m Load capacity: 250 KG (0.25 tons) Technical data: - Crane runway made from Demag KBK1 + KBK2 rails The system is delivered complete, including: - KBK rails - Rail connectors - Trolleys - End plates - Cable drag chain - Suspension brackets/hangers etc. Including Demag DC-COM 250 KG electric chain hoist The crane is dismantled and available immediately. Used condition, see pictures. Item location: 75053 Gondelsheim Shipping via freight carrier or pickup by appointment only. Lodpfjmqf Nfex Ad Toai Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 KG to 1,600 KG. Please inquire about your desired crane runway with overhang and dimensions.

Sąlyga: naujas, Gamybos metai: 2025, The ERBA EVP-RA 550 vibratory finishing machine features a flat process bowl base with integrated separation, specifically designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out via the integrated flap (manual/pneumatic operation). For increased load capacities, reinforced suspension and a more powerful motor can be installed upon request. The motor speed can be continuously adjusted using a frequency converter (optional). The EVP-A 550 can be linked with other machines due to its side discharge configuration. The system can be equipped with fully automated PLC control (optional). ERBA vibratory finishing systems are characterized by their durability and longevity, supported by the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 550 L - Process channel width: 390 mm - Imbalance motor output: 4.0 kW - Rotational speed: 1,400 rpm - Inner diameter of the bowl: 1,400 mm All prices are net, subject to the statutory VAT applicable at the time of purchase, and plus shipping costs. Lajdpfsn Ut Ugox Ad Toi The images may show the system including accessories, which are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. Our consultation is non-binding and at your disposal. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging portal). Our initial offer is non-binding and will include our general terms and conditions with company information and cancellation policy before any purchase/contract conclusion takes place.

Sąlyga: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. With its fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide-belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optional with magnetic holding system. By using 3250 mm long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs due to the belts’ longer service life. Lsdpfxsnah Taj Ad Teai Thanks to the modular machine design, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and surface finishing. Please contact us for more information and images via mail(at) or