Frezavimo staklė

DECKEL Prototyp FP4M

Būklė: naudotas, Gamybos metai: 1985, Technical Details: X-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Control: Contour 1 path control system Spindle taper: ISO SK 40 Spindle head swivels left and right: 90° Quill stroke: 80 mm Milling head vertically adjustable: 150 mm (y-axis) Speed range: spindle vertical: 50 – 2,500 rpm / 18 steps Feed rate X/Y/Z: 2 – 1000 mm/min, stepless Rapid traverse speed X/Y/Z: 2000 mm/min Speeds, horizontal: up to 1,000 rpm Table size: 460 x 800 mm Table load: 0.4 t Total power requirement: 9.5 kVA Machine weight approx.: 1,900 kg Machine dimensions approx. LxWxH: 2.35 x 2.2 x 2.0 m Horizontal spindle: milling beam displacement 385 mm, working spindle SK40 Equipment: - Operation via Grundig Electronic control panel with boom arm - Linear interpolation, circular interpolation in XY and XZ planes - Quick-action chuck - Handheld control unit - Coolant system with pump - Machine lighting - Milling spindle, steady rest Accessories: Various milling arbors, cutter holders (see comparable in photo) Redpfeu Ndcmjx Alcsch .

Būklė: naujas, Gamybos metai: 2023, Extraction capacity at filter unit connection*: 2,600 m³/h (free intake) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions L/W/H in mm: L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request Rjdpeh Rdxnefx Alcsch OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your benefits with the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available in simplex (single stage) or duplex (two stage) versions - Wide range of air performances available - Adaptable to pollutant load and required air flow - Large range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes with pure oil or for separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filtration units on the market and are in operation worldwide. Our filter units are already available with optional digitalisation and, for example, can be controlled via laptop. The ELBARON® device range includes 18 device variants and can be optimally sized and configured to match your application in terms of capacity and performance. ELBARON® units are characterised by long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiencies, long service lives, and trouble-free operation from an economic perspective.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 585 mm, Y ašies eiga: 185 mm, Z ašies eigos atstumas: 320 mm, bendras aukštis: 2 245 mm, bendras plotis: 1 340 mm, bendras ilgis: 1 140 mm, stalo plotis: 240 mm, stalo ilgis: 1 000 mm, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 2 000 aps./min, sukimosi greitis (min.): 100 aps./min, bendras svoris: 1 000 kg, darbo diapazonas: 650 mm, įėjimo įtampa: 400 V, atstumas nuo stalo iki veleno centro: 370 mm, įėjimo dažnis: 50 Hz, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Gręžimo pajėgumas plienui ----- 50 mm Frezavimo pajėgumas plienui ----- 25 mm Rcjdjga Twfopfx Alceh Mantelio frezavimo pajėgumas ----- 100 mm Išilginis judėjimas (X) ----- 585 mm Skersinis judėjimas (Y) ----- 185 mm Aukštinis judėjimas (Z) ----- 320 mm Horizontali variklis ----- 1,5 kW Vertikali variklis ----- 2,2 kW Horizontalaus frezavimo velenas ----- 60 ~ 1350 aps./min (9) Vertikalus frezavimo velenas ----- bepakopis 100–600 / 350–2000 aps./min Veleno tvirtinimas ----- ISO 40 Stalas ----- 1000 x 240 mm Svoris ----- 1000 KG ĮSKAIČIUOTA * DELTA dažnio keitiklis * 3 ašių skaitmeninis atvaizdavimas SINO * Automatinė išilginė ir skersinė stalo pastūma * LED apšvietimas * Aušinimo sistema * Prabangus valdymo spinta * Pasukama frezavimo galva į kairę/dešinę 0 - 45 laipsnių * Pasukamas darbinis stalas * Įvairūs laikikliai lagaminėlyje

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, Excellent Condition, CE Compliant Rjdpfxszbb E Ae Alcech Technical Specifications: >> Year of manufacture: 1990, Machine No. 2102-5046 >> Fixed angular table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories & Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes; the machine also has rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, target dimensions can be entered and the machine moves automatically to position. The FP1 was located in a training workshop and saw only occasional use. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. You are welcome to view and test the machine under power at our location.

Būklė: geras (naudotas), Sandėlio numeris: 3010 Gamintojas: Deckel Staklių numeris: 31488 Tipas / modelis: FP 1 Ėjimo atstumai x-y-z: 300 - 150 - 340 mm Stalas: 600 x 200 mm Apsisukimų diapazonas: 40 iki 2 000 sūk./min Veleno tvirtinimas: MK 40 Padavimai: 16 – 500 mm/min Jungtis: 1 / 1,5 kW Priedai/komplektacija: Elesta skaitmeninis indikatorius Būklė: gera Svoris: 0,8 t Rcsdsw D N Thepfx Alcjh Matmenys: 800 x 1 000 x 1 800 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Wide selection of used conveyor belts in stock Belt widths: between 500 and 1,200 mm Rcedpfswm Nibox Alceh Axle lengths: from 2 to 40 m Suitable for all types of mineral bulk materials Available with or without supports, some with chassis

Būklė: naudotas, Gamybos metai: 2006, x-travel 320 mm y-travel 240 mm z-travel 300 mm Total power requirement 3 kW Machine weight approx. 1 t O F F E R We can offer you, subject to prior sale and errors excepted, for immediate delivery from stock—no obligation: STIMIN Universal Tool Milling Machine with Digital Readout Model FUS-22-2M Year 2006 539 _____ Working range: Longitudinal travel X-axis 320 mm Rjdewp S Sdspfx Alcoch Cross travel Y-axis 240 mm Vertical travel Z-axis 300 mm Clamping surface 320 x 670 mm Table load approx. 75 kg Tool holder SK 40 18 spindle speeds 45 – 2240 rpm Quill stroke 60 mm Feeds X / Y-axis, stepless 2 - 1,600 mm/min Feeds Z-axis, stepless 2 - 1,000 mm/min Spindle drive power 1.5 kW Total drive power approx. 3 kW - 400 V – 50 Hz Weight approx. 1,000 kg Accessories / Special features: • Manual handwheels on all 3 axes for conventional milling • Additionally equipped with a digital readout (ACU RITE) on all 3 axes • Fixed angle table 320 x 670 mm mounted • Tilting vertical milling head, +/- 90° swiveling • Robust machine construction with stable build • Work light, coolant system, swiveling control panel, chip pan, operating instructions • The universal milling machine also complies with CE standards, making it especially suitable for use in training workshops or other facilities. Condition: Very good condition! Due to the combination of manual operation, this is the ideal machine for the (training) workshop or for small batch production! Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Please click here for a video of the machine: We always have a wide range of conventional and CNC milling machines in stock!

Būklė: paruoštas naudoti (naudotas), xs eiga 510 mm y eiga 450 mm z eiga 410 mm Pagrindinis veržliarakčio kūgis MAS BT 45° (SK40) Rodpfjxaam Usx Alcech Stalviršio tvirtinimo paviršius 800 x 395 mm T-formos grioveliai 6 vnt. Apsisukimai 50 - 2500 aps./min Pašara be pakopų 4-1600/4-1000 mm/min Įtampa 400 V Bendras galios poreikis 5,0 kW Staklių svoris apie 1400 kg Matmenys I-P-A 2300 x 2300 x 1800 mm Iš mokomosios dirbtuvės Gerai prižiūrėta būklė (!!) - Patikrinta būklė - Staklių vaizdo įrašas - ?v=iSTVEdv2fO8 Įranga: - Tvirta universali frezavimo staklė - Sukiotas valdymo pultas, dešinėje priekyje - Pasukama universali frezavimo galva (kairė/dešinė = 90°) * su hidrauliniu įrankių tvirtinimu - Rankinis frezavimo veleno pastūma, su fiksavimu - Pasukamas frezavimo veleno apsauga - Stabili T-formos griovelių tvirtinimo/kampinė staklių stalas - Ašių pastūmos su greitaja eiga - Centrinė tepimo sistema - Valdymo spinta, integruota kairėje * Skaitmeninė indikacija - neveikia

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electronic hand controller - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 - 3,150 rpm with 21 gear steps Feed rate: 4-2000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg Rsdpfx Aowid Spolcsch - C-axis rotation: 360° - A-axis tilting: 15°/45° - B-axis swiveling: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional features: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space including auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and in operation by appointment.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2201-5046, Gera būklė su įvairiais įrankių laikikliais. SK40 - S20 Heidenhain aktyvus valdymas Rcedey Al Tnepfx Alceh Automatinės pastūmos visose ašyse. Ketvirta ašis valdoma.