Gręžimo staklės

DECKEL FP 4 M Aktiv

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, plunksnos brūkšnys: 90 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, Įranga: dokumentacija / vadovas, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its comprehensive equipment, this model is a true highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, leaving it in absolutely top condition and technically, visually, and geometrically almost indistinguishable from a new machine. We are looking forward to your inquiry! Delivery time: upon request Spindle speed: 50 – 2500 rpm Feed rate: 8 – 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table design: Fixed angle table or rotary-swivel tilting table Ijdsx Irwdopfx Af Ijal Further features and accessories include: 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant unit, mounting feet, technical documentation, and much more upon request… Our service promise to you: - We are a certified master trades company in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - You are free to choose the machine’s paint color - Additional accessories such as tools can be ordered along with the machine upon request - If you wish, we can also install accessories such as safety devices, etc. - We are happy to handle shipping and/or installation for you

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 380 mm, veleno skylė: 72 mm, tekėjimo skersmuo: 600 mm, Manufacturer: Gurutzpe Model: Super M 300 Admissible dimensions: Distance between centers: 3,000 mm Swing over bed: 600 mm Swing over cross slide: 360 mm Swing over gap: 780 mm Bed width: 415 mm Spindle bore diameter: 72 mm Speeds: 18 available speeds: from 16 to 1,000 rpm Motor: Power: 10 HP Equipment: Fagor digital readout Quick-change toolpost 4-jaw self-centering and adjustable chuck Ijdpfxewtwqaj Af Ijal Steady rest Overall condition: Lathe in good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Iajdpeu Tuk Hofx Af Isl Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, plunksnos brūkšnys: 90 mm, Dear Sir or Madam, We are pleased to offer you a meticulously maintained milling machine: Deckel FP4M (K) aktiv, equipped with a rotary-swivel tilting table and 4-axis digital readout. Thanks to its comprehensive features, this model is a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately available for operation. We look forward to your inquiry! Iedjvvtlgepfx Af Isal Availability: Immediately available Machine no.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-swivel tilting table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further equipment and accessories include: 4-axis digital readout Heidenhain, 3-axis active control, hydraulic tool clamping, rotary-swivel tilting table, coolant system, machine leveling pads, operating manual, and much more on request... Our service promise to you: - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your chosen machine - You are free to choose the colour scheme of your machine - Additional accessories such as tooling can be included in your order upon request - We can also install further accessories such as safety devices upon request - We are happy to arrange shipping and/or installation

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Iajdpfxsv Az Uco Af Iol Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Isdpjvz Tyujfx Af Ijal Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Sąlyga: naujas, X ašies eiga: 6 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 000 mm, frezos galvos padėtis: Universal-Diagonal-Fräskopf, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, veleno greitis (maks.): 6 000 aps./min, pasukimo diapazonas: 1 °, stalo ilgis: 7 500 mm, stalo plotis: 1 100 mm, sukimo momentas: 1 178 Nm, stalo apkrova: 42 000 kg, aušinimo skysčio tiekimas: 36 juosta, ašies variklio galia: 53 W, Įranga: sūkių greitis be galo kintamas, VISIŠKAI NAUJA STACIONARI FREZAVIMO STAKLĖ Valdymas ir varikliai: Ijdpsvrv Suofx Af Isal Dvi HEIDENHAIN TNC 640 skaitmeninės CNC valdymo sistemos – viena įrenginio priekyje, kita gale kabinoje HEIDENHAIN paketas (varikliai, matavimo sistemos ir rankenėlė) Papildoma komplektacija: Grandininis įrankių keitiklis su dvigubu griebtuvu, 60 vietų Dvigubas lankstinis drožlių transporterio konvejeris (išilginis), vienas priekyje ir vienas gale Tikslumai: Pozicionavimo tikslumas: ±0,040 mm Kartojimo tikslumas: ±0,008 mm Atsakome tik į užklausas iš Vokietijos // Tik užklausos iš Vokietijos bus nagrinėjamos

Gamybos metai: 1985, Sąlyga: paruoštas naudoti (naudotas), Table dimensions: 1435x460 mm, number/width/spacing: 5/16/80 mm, control unit: TNCi-120, length: 1435 mm, width: 2330 mm, height: 1648 mm, weight: 3.1 t, with documentation, accessories available, no known defects, on-site inspection possible. Iajdpfelbmupsx Af Ijl

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Iajdsiw Dlkspfx Af Iel Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Iaodsvnd Suopfx Af Isl