3100x20MM - 4 ritinėlių hidraulinis cilindras

CRONOSSTECH SHSB 4R 30-350

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection Credpjd Ab H Hjfx Admek • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls Credpfxod Auace Admjk • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 051888, Used automatic circular saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Year: 2004 Headstock block rotation mechanism for angled cuts up to 45° to the left, with locking lever. Removable pneumatic anti-burr vice. Pneumatic cylinder for vice movement, with adjustable speed brake. Transmission with dual variable-pitch pulley for adjustable speed from 15 to 90 m/s. Swinging head mounted on adjustable self-lubricating bushes. 600 mm stroke feeder operated by pneumatic cylinder. Repeatable up to a maximum of 9 strokes for a total feeding length of 5400 mm. Maximum feeder jaw opening: 160 mm. Programmable piece counter. Minimum end trim offcut: 160 mm. Feeder speed control valve. Ammeter. Reverse mode. Emergency stop button and control panel lockable master switch. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for easy cleaning. Full safety guard designed for quick blade change. Credpfx Aderfw Ikemek Blade diameter: Ø 350 mm. Cutting capacity: Round tubes 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Specifications: Three phase, 380V Dimensions: 1300 x 1350 x 1600 mm Work height: 950 mm Weight: 420 kg

Sąlyga: naudotas, Plate Bending Roll Crsdpfsvx A Amsx Admjk Brand: CASANOVA Model: PCV 35- 3 ROLLS Description • Capacity: 3050 x 20 mm • Voltage: 400V/50Hz • Weight: 15,000 kg

Sąlyga: naujas, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10.6 t Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 13.0 mm » at 3x top roller diameter Pre-bending: 10.0 mm » at 1.5x top roller diameter Top roller diameter: 270 mm Lower roller diameter: 250 mm Side roller diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Conical bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of lower roller via torsion shaft • Pressure-adjustable lower roller • Electrical and hydraulic overload protection • Mobile control console • Machine and equipment comply with CE regulations See catalog at the following link:     Codpfxsd Ab H Is Admork   Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be max. 30% or more than 60% of the roller length • Hardened rollers are recommended

Sąlyga: labai geros būklės (naudotas), Press force: 300 TON Csdpfxoq N Etzo Admork RATED CAPACITY Model: 2MR TYPE Year of construction: 2000 YEAR OF CONSTRUCTION Table dimensions: 1,750 x 1,250 mm TABLE DIMENSIONS Slide adjustment: 160 mm SLIDE ADJUSTMENT Strokes per minute: 10-30 c/min CONTINUOUS SPEED (variable) Slide stroke: 250 mm SLIDE STROKE Shut height at BDC: 500 mm SHUT HEIGHT Main motor power: 32 kW MAIN MOTOR POWER Hydraulic safety: present HYDRAULIC SAFETY

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, mašinos/transporto priemonės numeris: MG07100H, apatinio volelio skersmuo: 450 mm, viršutinio volo skersmuo: 480 mm, šoninio volelio skersmuo: 450 mm, volelio skersmuo: 600 mm, vėjo ilgis: 750 mm, darbinis plotis: 700 mm, darbinio aukščio: 1 800 mm, maks. lakšto storis: 100 mm, plieno lakšto storis (maks.): 100 mm, aliuminio lakšto storis (maks.): 100 mm, bendras svoris: 20 000 kg, bendras ilgis: 3 600 mm, bendras plotis: 2 500 mm, bendras aukštis: 2 760 mm, galia: 36,77 kW (49,99 AG), kūgio skersmuo: 600 mm, įvesties srovės tipas: trifazis, darbinis ilgis: 700 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, 3-rollen Blechbiegemaschine, Baujahr 1999, Hersteller MGsrl, Modell 750x100 mm Biegeleistung: 100 mm Blechstärke Maximale Arbeitsbreite: 750 mm Csdsv A Iwqspfx Admsrk Planeten-Hydraulische Rundbiegemaschine mit Vorbiegefunktion Oberwalzendurchmesser: 480 mm Seitenwalzendurchmesser: 450 mm Spannung: 380/50 V AC, installierte Antriebsleistung 50 PS auf der Hydraulikeinheit Ausstattung: - Gehärtete Oberflächen aller 3 Walzen - 3 einzelne Walzantriebe, jeweils mit planetarischem Getriebe und Hydraulikmotor, jede Walze separat angetrieben - Kalibriersystem für das Nachwalzen von geschweißten Behältermänteln - Ringsatz zum Klemmen, Ausrichten und Führen des Blechmaterials auf den Walzen - Elektrisches Steuerpult auf Fahrwagen mit zentraler Bedienung, Joysticks und Digitalanzeige - Hydraulische stirnseitige Öffnung (Drop-End) zum Entladen von fertig gebogenen, geschlossenen Zylindern - Stufenlos regelbare Arbeitsgeschwindigkeit (Langsam/Schnell) - Not-Aus und Sicherheitseinrichtungen gemäß den geltenden Vorschriften Abmessungen: 3600 x 2500 mm, Höhe: 2760 mm Gewicht: 20 Tonnen Die Maschine befindet sich in gutem, kontrolliertem und geprüftem Zustand.

Sąlyga: geras (naudotas), Technical data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum prebending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller assumes no liability for typographical or data transmission errors. The machine's visual condition, technical state, and level of wear are consistent with its age; used machines are sold without any warranty. Csdjwkaalspfx Admjrk

Sąlyga: naudotas, Gamybos metai: 2008, Table length 2550(5040) mm Table width 1550 mm Crjdpfovf Rhdox Admsk Cutting heads 1 Travel ranges (X,Y,Z) 2520(5040)x1550x300 mm Laser power in watts 4000 W Control unit AMNC-F Operating hours 34,981 h Sheet thickness for steel 12 mm Sheet thickness for stainless steel 8 mm Sheet thickness for aluminum 6 mm Cutting speed X/Y/Z 80/80/60 m/min Max. table load 330 kg Laser gas consumption L/h Machine dimensions: Length 6000 mm Width 2600 mm Height 2300 mm Weight 7.7 t Connected load 69 kVA Including: - Chiller - Transformer - Extraction system, Alphapack - Turbine runtime: 12,000 hours (24,000) The machine can be inspected under power.

Sąlyga: naujas, Gamybos metai: 2025, H-Rahmen Doppelwirkende Hydraulikpresse MODELL HDD 400 / 400 Tonnen Zylinderkraft (Tonnen) 400 t Min. Arbeitsdruck (bar) 30 bar Max. Arbeitsdruck (bar) 250 bar Hauptzylinderdurchmesser Ø 420 mm * 1 Stk. Hilfszylinderdurchmesser Ø100*60 mm * 2 Stk. Tischgröße (mm) 1500 x 1200 mm Hub (mm) 1000 mm Lichte Weite (mm) 1400 mm Vorschubgeschwindigkeit (mm/s) 1400 mm/s Rücklaufgeschwindigkeit (mm/s) 200 mm/s Arbeitshubgeschwindigkeit (mm/s) 2 – 12 mm/s Kissenkraft (Tonnen) 200 t Crjdpfx Adowbtn Rjmsk Kissenhub (mm) 400 mm Auswerferkraft (Tonnen) 10 t Auswerferhub (mm) 300 mm Motor (kW) 37 kW Pumpe (ccm) 100 ccm Abmessungen (LxBxH) 2550 x 3500 x 6100 mm Gewicht (kg) ca. 26.000 kg