Obliavimo staklės

CORMAK PT250 400V

Sąlyga: naujas, Gamybos metai: 2024, Saw Saw blade speed: 3000 / 4000 / 5000 RPM Saw blade diameter and bore: 300 – 400 mm, 30 mm Saw blade tilt: 90° – 45° Cutting depth at 90° / 45°: 125 mm / 90 mm Cutting width with parallel fence version Z400 M, Z400 EL: 1350 mm (optional 1000 / 1525 mm) Kljdpfx Afoglfv Se Iol Cutting width with parallel fence version Z400 X1, Z400 X3: 1250 mm (optional 1500 mm) Cutting length: 3500 mm (optional 2500 mm / 4100 mm) Cast iron table dimensions: 985 mm x 710 mm Sliding table dimensions: 3200 mm (optional 2200 mm / 3800 mm) x 420 mm Cross table dimensions: 1420 mm x 650 mm Length of swiveling crosscut fence: 2295 mm (telescopic extension up to 3000 mm) Scoring unit Scoring blade diameter and bore: 120 mm, 20 mm Cutting depth with 120 mm diameter blade: 3.5 mm Scoring blade rotational speed: 8200 RPM Scoring saw motor power: 1.3 kW / 2 HP (S6) Weight: 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage: 400 V 3-Phase (optional 230 V 3-Phase) Motor power (3-Phase): 7 kW / 9.5 HP (S6), optional 9.2 kW / 14 HP (S6)

Sąlyga: naujas, Gamybos metai: 2025, Centre height: 250 mm Spindle bore: 103 mm Distance between centres: 1000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Kjdjd I A Dhjpfx Af Ioll Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2500 x 1100 x 1380 mm

Sąlyga: naujas, Swing diameter over bed: 410 mm Swing diameter over cross slide: 240 mm Turning length: 1000 mm Swing diameter in gap: 530 mm Spindle speed: 65 - 1810 rpm Centre height: 205 mm Kedpfxsm Rlb Ne Af Ioll Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feedshaft lathe with: - 3-axis digital readout system, fully mounted - Electromagnetic main spindle brake - Automatic feed in longitudinal and facing directions - Safety relay - Micrometer end stop - Coolant system - 3-jaw chuck with 1 set each of outside and inside jaws - German instruction manual.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74-4-10, Panel saw ALTENDORF F90, year of manufacture 1974 Machine No.: 74-4-10 Manufacturer: Altendorf, Germany Kjdpfeipvrbex Af Ioll Saw length (mm): 2600 Cutting width (mm): 1300 Max. cutting height (mm): 130 Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit 4 speed settings Manual saw blade height adjustment Approx. weight (kg): 780 Technical data subject to change

Sąlyga: naujas, Gamybos metai: 2025, Surface planers-thicknessers, planing machines in the Cormak range Our store offers a wide selection of professional, versatile planers that combine stable operation and high surface accuracy with an attractive price point. Gain a machine that will accelerate your production and enhance the quality of your wooden products—even for amateur applications in home workshops. Cormak guarantees satisfaction. Construction and operation of a planer Table: The thicknesser table is made from high-quality ground cast iron, with a polished working surface up to Ra 1.6 finish. Table height adjustment is handled by a large, easy-to-use handwheel, which can be locked in place with an additional eccentric lever once the desired height is set. Knives: A key component of every planer, knives are located above or below the table and remove excess material from the wood surface. These knives are mounted on a rotating cutter block or head. Motor: The planer is powered by an electric motor that delivers the energy needed to drive the cutter block or planer head. Cutterhead guard: The shaft guard can be freely adjusted in terms of height, angle, and length of extension. Feed mechanism: The woodworking machine is equipped with feed rollers (drive and outfeed) placed close to the cutter shaft, enabling even relatively short workpieces to be fed through the thicknesser. The feed rollers are chain-driven, guaranteeing a slip-free operation (eliminating marking on the machined workpiece). Guides: Guides help maintain consistent movement of the material. The angle fence can be smoothly set anywhere between 90° and 45°. Stability: The machine’s substantial weight ensures solid stability, allowing for safe work free from vibrations, enhanced further by additional anti-vibration feet. Ease of use: Adjustments are straightforward, and converting the machine from surfacer to thicknesser function takes only a few seconds. Technical specifications of the thickness planer: Cutter block diameter [mm]: 75 Cutter block speed [rpm]: 4000 Dust extraction port diameter [mm]: 100 Fence tilting angle [°]: 0–45 Number of knives: 3 Knife size [mm]: 250x30x3 Max planing width (surface planer) [mm]: 254 Max planing width (thicknesser) [mm]: 254 Max planing height [mm]: 180 Max depth of cut (thicknesser) [mm]: 3 Max depth of cut (surface planer) [mm]: 2.5 Feed speed (thicknesser) [m/min]: 6 Kjdovxh Nxepfx Af Ijll Dimensions (L x W) [mm]: 1080 x 260 Gross weight [kg]: 152 Motor power: 2.6 kW Power supply: 230V

Sąlyga: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Ksdpfx Asxl Ha Ssf Iell Delivery terms: ex stock

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KK052469, Connected load: 380V 4kW Table size: 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Forward/reverse rotation Motor brake Socket for feed unit Klodpeiinm Hefx Af Isl Protective covers for hand routers Spindle diameter: 30 mm Aigner fence Extraction port: 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Sąlyga: naudotas, Gamybos metai: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Ideal for demanding craftsmen and carpenters - Extra-long, one-piece jointer tables facilitate easy surfacing of workpieces - Working tables made of grey cast iron, highly resistant and permanently flat, with rearward-opening jointer tables supported by tension springs for quick and convenient changeover - Fixed suction hood eliminates the need to switch the extraction hose during changeovers, saving valuable working time - Helically toothed steel infeed roller ensures consistent and even wood feed - Rubber outfeed roller at the thickness planer exit guarantees uniform wood discharge - Material feed with four speeds - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: with electric thickness table height adjustment and digital display - Start and stop switches positioned for operator convenience Klodpfjx Hbrnsx Af Iel - Powerful industrial motor - High machine weight ensures maximum precision and smooth operation - Prepared for slot mortising attachment - Quality made in Italy - Equipped with a spiral cutterblock - Fitted with foldable cutterblock guard - Total table length: 2250 mm - Maximum chip removal: 5 mm - Working width: 520 mm - Thicknessing height: 3 - 240 mm - Number of cutter knives: 66 - Cutterblock speed: 5000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2250 x 1440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Sąlyga: beveik kaip naujas (parodų įrenginys), DEMONSTRATION MACHINE For sale is an as-new Record Power PT310 jointer-planer with a planing width of 310 mm. The machine is in its original condition, therefore you receive the full warranty. Technical specifications: - Motor power: 3 HP / 230 V connection - Jointer table length: 1,407 mm - Planing width: 310 mm - Cutterhead diameter: 70 mm - Cutterhead fitted with 3 knives Kljdpfx Afoviu S Uj Ijl - Maximum cutting depth: 3 mm - Feed speed: 7 m/min - Weight: 202 kg Shipping via freight carrier: Austria: €80.00 incl. VAT Germany: €100.00 incl. VAT South Tyrol: €120.00 incl. VAT The planer is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: jointer, thicknesser, planer, surfacing, thickness Reference: ZXPT310-A

Sąlyga: naujas, Gamybos metai: 2025, Universal Lathe CORMAK 310 x 900 (TU3109V), VARIO version with stepless spindle speed adjustment. Machining capacity: 310 x 900 mm. Equipped with a modern 1.5 kW / 230 V DC motor, cooling system, and digital readout. Recommended for turning hard steels, internal and external surfaces, tapers, polishing, metric and imperial threading, drilling, and broaching. Semi-professional model, suitable for single-piece and small-batch production. Machine supplied with base. The CORMAK 310 x 900 (TU3109V) 230V universal lathe features smooth spindle speed regulation, ensuring ergonomic operation tailored to user needs. Shorter setup times when machining a wide range of workpiece sizes translate into improved efficiency and ease of use. VARIO Version – electronic, infinitely variable spindle speed control via DC motor and voltage regulator, providing optimal spindle chuck rotational accuracy for superior machining quality. Kledpfx Ajric Idef Isl The modern DC motor with stepless spindle speed control offers ease of use and reduced setup times. Smooth and efficient drive with excellent rotational speed and torque characteristics. LCD display shows spindle speed, enabling direct monitoring and quick speed adjustments during selection of cutting and threading modes. Two spindle speed ranges: low (80–1000 rpm) for machining hard steels and high (160–2000 rpm) for high-speed precision turning. Easy regulation of spindle speed and automatic feed via ergonomic gearbox control panel. Bed with induction-hardened and ground guideways. 180 mm bed width ensures stable and precise working conditions. Wide threading range (right and left threads): metric – (18) 0.2–3.5 mm, imperial – (18) 8–48 TPI. Automatic longitudinal feed: 0.085–1.832 (9) mm/rev., and cross feed: 0.010–0.100 (9) mm/rev., to reduce machining time and improve quality when turning long workpieces. 38 mm spindle bore allows optimal machining performance on large-diameter shafts. Compound slide with graduated scale, swivels ±45°, tailstock set-off ±10 mm for taper turning. Hardened and ground spindle gearbox gears. Leadscrew and feed shaft for threading, as well as automatic longitudinal and cross feed. Cooling system and 2-axis digital readout included as standard. Machine fully compliant with EU (CE), Polish regulations, and DIN standards.