Juostinis pjūklas

CORMAK BS-128HDRC 400V +2x M42 +5L Emulgol

Būklė: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Gsdpfx Aehpktvefdsbn Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS260 band saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are essential. The model features a swiveling arm adjustable from 0-60°. The design of the saw bow ensures accurate and quiet operation. It comes with a removable chip tray for easy cleaning! Machine Features This horizontal metal band saw with a swiveling arm allows for cutting perpendicular or at any angle between 0 and 60° to the material axis. The workpiece can be fed manually or with any mechanical device, while the saw blade feed operates automatically. The blade guides are fitted with special carbide inserts and bearings, which greatly improve blade tracking, longevity, straightness, and the quality of the cut. Carbide blade guides significantly reduce wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed-cycle cooling system. Gbjdpfx Aeudi Uzefdon The saw’s arm is cast from a single piece of cast iron, and, combined with a 27 mm wide band saw blade, it is fully suitable for serial cutting of both profiles and solid materials. The vice is mounted on an adjustable bed with a quick-release clamp. Blade guides are equipped with carbide inserts and rolling bearing systems. It is the CARBIDE BLADE GUIDES that ensure cutting precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during the cutting process. To the base, a sturdy cast iron work table with a swiveling arm is mounted, along with a control panel on a separate arm. During cutting, the main cutting motion is performed by the moving saw blade, while arm feed is via gravity. The speed of arm descent (cutting speed) is adjusted using a hydraulic cylinder. Feed rate is controlled from the saw’s control panel. There are two blade speeds to choose from: 35 and 70 m/min. In the lower end position of the arm (after cutting the material), the drive to the blade is automatically switched off. Safety is ensured by saw blade guards and microswitches that stop the motor after the cutting cycle or when any guard is opened. Additional protection consists of the automatic saw shut-off in the event of blade breakage. Band saw blade size [mm]: 2520 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent adjustment: stepless – hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase 400V Main motor power [kW]: 1.1/1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150x80x140 Weight [kg]: gross/net - 210 / 180 kg Additionally: - 2 pcs M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Būklė: naujas, Gamybos metai: 2026, The CORMAK ZS-40B industrial geared pillar drill is a robust machine boasting significant potential. Equipped with a swiveling head with adjustable height, an automatic tapping device, and a precision handwheel, it delivers flexibility and accuracy in operation. The powerful motor ensures high drilling performance, while the solid construction and hardened oil-bath transmission gears guarantee stability and durability. Supplied with a set of tap holders, extending the capabilities of this professional tool. Additionally, the drill features power feed and integrated coolant system. Machine Features - Exceptional operational flexibility thanks to the swiveling, height-adjustable head - Integrated coolant system - Left/right rotation, automatic tapping device - Precision handwheel with depth scale Gedpsridv Ssfx Afdobn - Hardened gears in the oil-bath gearbox - High stability and machining quality due to a solid base - Powerful motor ensuring excellent drilling performance - Rigid, thickened column with ground surface - Large rotary table with height adjustment - Vice-mounting capability Technical Data DRILLING CAPACITY (CAST IRON/STEEL): 40/32 mm TAPPING CAPACITY (CAST IRON/STEEL): M32/M24 COLUMN DIAMETER: 115 mm SPINDLE TO COLUMN DISTANCE: 260 mm MAX. SPINDLE END TO WORKTABLE DISTANCE: 754 mm MAX. SPINDLE END TO BASE DISTANCE: 1270 mm SPINDLE TAPER: MT4 SPINDLE SPEED RANGE: 50 - 2520 rpm NUMBER OF SPEEDS: 6 FEED RATES: 0.12; 0.18; 0.25 mm/rev WORKTABLE DIMENSIONS: 354x575 mm TOTAL HEIGHT: 2120 mm MOTOR POWER: 1.5 kW POWER SUPPLY: 400 V/50 Hz WEIGHT: 350 kg

Būklė: naujas, Cutting range round 0°: 150 mm Cutting range square 0°: 150 x 150 mm Gbodpeilk E Dsfx Afdsn Cutting range flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting range flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting range flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 – 80 m/min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw bow swivels up to 60° - Equipped with 2 blade speeds for optimal adjustment to the workpiece - Ideal for machining pipes, profiles and solid material made of stainless steel, iron, etc. - Generously dimensioned saw arm for low-vibration operation - Saw arm lowering via hydraulic downfeed cylinder - Low-noise operation thanks to robust design - Automatic shut-off at end of cut via microswitch - Quick-release vice for easy and fast clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - Incl. base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 TPI - Quick-release vice - Material stop - Hydraulic downfeed cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Būklė: naujas, Cutting diameter: 220 mm Saw band length: 2450 mm Cutting width: 250 mm Cutting speed: 40 / 80 m/min Saw band dimensions: 2450 x 27 x 0.9 mm Gedpfjlb I A Sjx Afdebn Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 90 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° rectangular: 160 x 110 mm Cutting capacity at 90° rectangular: 250 x 190 mm Total power requirement: 0.75 / 1.1 kW Table height: 925 mm Machine weight: approx. 218 kg Space requirement: approx. 1300 x 700 x 1530 mm

Būklė: naujas, Pressure: 40.0 t Stroke: 285 mm Flat bar on the high edge: 250 x 24 mm Working speed: 10.0 mm/sec Return speed: 10.0 mm/min Working height: 930 mm Table: 660 x 1250 mm Total power requirement: 4.0 kW Motor: 400 Volt 50 Hz Oil capacity: 40.0 l Weight: 800 kg Dimensions (LxWxH): 1450 x 800 x 1300 mm Equipment: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine constructed from hardened and ground forged steel - Digital display for stroke adjustment * Programming of 1x bending endpoint & 1x retraction point possible - 1x tool set (1x bending punch / 1x single V-die) * Bending punch: Angle 60° / bending radius: 5.0 mm * Die: Angle 60° / V opening: 63.0 mm Gbjdpfx Aexabhmsfden - Infinitely variable adjustment of bending speed and pressing force - 1x manual material stop - Mobile double foot switch - Machine can be transported with pallet truck/forklift - Operating manual

Būklė: naujas, Cutting diameter: 180 mm Cutting capacity at 90 degrees: square 180 x 180 mm Cutting capacity at 90 degrees: flat 200 x 150 mm Cutting capacity at 45 degrees: round 115 mm Cutting capacity at 45 degrees: square 110 x 110 mm Cutting capacity at 45 degrees: flat 125 x 110 mm Cutting capacity at 60 degrees: flat 70 x 70 mm Cutting capacity at 60 degrees: square 70 x 70 mm Cutting capacity at 60 degrees: round 70 mm Blade speed: 40 / 80 m/min Saw band length: 2,130 x 20 x 0.9 mm Total power requirement: 0.75 kW Machine weight approx. 190 kg Equipment: - Compact/robust manual bandsaw - Single-sided mitre device, adjustable up to 60° to the left Gedpoxaa Tnofx Afdjbn - Hydraulic lowering of saw bow * Stepless feed rate adjustment * End stop with automatic shutdown at end of cut - 2 band speeds - Saw band guides made of carbide plates - Manual vice with quick-release clamping - Machine base frame - Coolant system - Manual blade tensioning (star handle at front) - 1x angle stop - 1x metal saw blade - Operating manual

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 1,1 kW (1,50 AG), įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, bendras aukštis: 1 700 mm, bendras ilgis: 1 400 mm, bendras plotis: 685 mm, bendras svoris: 200 kg, Apvalaus plieno pjovimo diapazonas ties 45°: 145 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 225 mm, Kvadratinio plieno pjovimo diapazonas 45° kampu: 150 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 190 mm, juostinio pjūklo ilgas: 2 480 mm, pjūklo juostos plotis: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Gjdpjga Tzqofx Afdjbn Saw speed --- 45 - 90 M/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDES * Adjustable material vise * Angle graduation up to 60° * Automatic cut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure adjustment * CE emergency stop * Coolant pump * Base cabinet * Quick-release vise * M42 Bi-metal saw band

Būklė: naujas, Model designation: PH 261-1 HB Godpjl H Dydjfx Afdjbn

Būklė: naujas, Press force: 60 t Max. stroke: 300 mm Max. bending capacity (flat): 300 x 16 mm Working speed: 10 mm/sec Control system: NC Tool height: 300 mm Total power requirement: 5.5 kW Machine weight approx.: 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine offering extensive combination options. Whether it’s tube bending, profile punching, or sheet metal cutting—with suitable accessories, the HP 60 is a multifunction machine among all presses. Standard equipment: - Ergonomic tool clamping table - Simple tool change - Hydraulic speed and pressure adjustment - Easy-to-adjust backgauge - Induction-hardened support pins - NC control Gbsdpfx Aexfb Ikefden Highlights: - Control panel with digital display - Simple tool change - Hardened support pins - Hydraulic speed regulation The HP 60 is manufactured for our sales brand “GERD WOLLF Maschinenfabrik” by a renowned Turkish manufacturer. The images are for reference only and do not represent the machine to scale.