Pjaustymo malūnas / granuliatoriai

CONDUX Schneidmühle CS 500/600-IIA

Gamybos metai: 2003, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system Nksdeiyyf Ispfx Agieu TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Gamybos metai: 1972, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Nkedpfx Agjb Tdqusiju Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 990 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 3 900 mm, įėjimo srovė: 63 A, bendras ilgis: 9 500 mm, bendras plotis: 4 500 mm, galia: 15 kW (20,39 AG), Įranga: dokumentacija / vadovas, Pelletizing plant suitable for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn straw, etc.), as well as feed materials. This is a complete system mounted on a base frame and consists of the following components: - Raw material storage container, 4m³, including agitator. This has been extended with wooden panels to approximately 3-4m³. - Intermediate screw conveyor to the hammer mill - Hammer mill, 11 kW, for shredding wood chips or other materials Nkedpfoxv Dkcsx Agiju - Inclined mixer for material homogenization including moisture measurement, dosing unit, and level monitoring - Dosing container for press additives, feeds into the inclined mixer - Dosing screw for optimal material feeding to the pellet press (speed controlled) - Pellet press, 15 kW, including full sensor, temperature monitoring, and discharge chute - Conveyor belt to the dedusting sieve - Dedusting sieve with material discharge at 3m height The plant is designed for easy expansion with a second 15 kW press. The entire system is centrally controlled via a Siemens PLC with touch display. All operating parameters are monitored, and the press will shut down automatically in the event of a fault. Remote operation and monitoring of the press is possible via any PC. The chip dryer shown on picture 2, mounted on the wall with discharge and control system, can also be purchased. For further details, please contact us.

Sąlyga: naujas, Gamybos metai: 2026, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the drag floor. Bales are placed on the drag floor and the cutter head’s feed is activated. The tines on the cutter head tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: Capacity: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill, kW of the straw mill). Without the straw mill, the bale breaker can even dissolve up to max. 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Cutter head motor: 5.5 kW, 380 Volt Drag floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Extra charge for larger straw shredder (18.5 kW) + €3,940 net Technical Data, MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts (options: 10, 12, 15, 22, 30, 45 mm hole size) With star-delta switch, overload protection, and 8m supply cable ready to plug in Discharge spout: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at Extra Cost: Feed auger + €970 net Cyclone (to be mounted by customer; should be max. 10 m away) + €2,970 net Nkodsb Nulhjpfx Agisu Simple filter €1,750 net --- Further Options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (for pressureless material discharge) + €5,750 net Control system: from €1,620 net Special dissolver extension 3 m (other dimensions on request) + €9,750 net Briquetting press MPP 180 S; lightly used demo unit 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for loosening round and square bales of hay and straw. The shredder attached to the bale breaker processes straw from all types of grain, hay, corn, and miscanthus. muetek machines of the MHZ/MHB series are characterized by a robust design and a heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed using a front loader. The support can be adjusted according to the type of bale. The chain conveyor feeds the bale against the milling rotor; the feed speed is adjustable. The milling rotor is equipped with several teeth that tear apart the straw bale. The separated straw is discharged. --- As a rule, the machines are suitable for dry input materials: - Straw - Hay --- The processing of hemp is only possible with a special dissolver. Extra cost approx. €9,720 net, depending on version. The shredder cannot process hemp with the straw mill. Requirements for the input material: Maximum moisture content 12%.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour, bottle formats: 500ml/750ml/1000ml/1500ml, max. blow air pressure: 40 bar, dimensions (L/W/H): approx. 7000mm/4300mm/3100mm, weight: approx. 20,000 kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorter, and chute. Documentation available. An on-site inspection is possible. Nkedpfx Ajt Eu Azsgiou

Sąlyga: geras (naudotas), Atidarymo plotis: 150x80 mm Nkjdpfx Agofhnv Ioisu 2 rotaciniai peiliai (95 mm)

Sąlyga: naudotas, Gamybos metai: 2002, Swing diameter 630 mm Turning length 3000 mm Swing diameter over cross slide 480 mm Spindle speed 9 - 1800 rpm Spindle bore 83 mm Tailstock quill taper MK 6 Total power requirement 22 kW Machine weight approx. 5400 kg Space requirement approx. 5250 x 1900 x 1750 mm Equipment: - Digital display - 3-jaw chuck Ø315 mm ROTA-S PLUS - MULTI-FIX quick-change tool holder - digital speed display - coolant system - rapid traverse longitudinal and crosswise - steady rest - revolving live center - chuck guard - chip guard rear wall - machine lamp - machine feet - operating manual Nodpfjwz Rvlox Agijku

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, Arburg 1200 T 2000-800 (vertikali mašina su 1200 mm besisukančiu stalu) Uždarymo vienetas 2000T Stalo skersmuo: 1200 mm Kampinis pasukimas: 180 laipsnių Uždarymo jėga: 200 tonų Atidarymo jėga maks.: 115/500 kN/mm Nkedpfxowugczs Agieu Įpurškimo vienetas Sraigto skersmuo: 45 mm Įpurškimo tūris: 318 cm³ Įpurškimo svoris: 291 g Įpurškimo slėgis: 2470 bar 1. Modelis: T-modelis 2. Mašinos tipas: 1200 T 2000 - 800 3. Plastifikavimo vienetas: aukštai atsparus dėvėjimuisi termoplastinis cilindras, 45 mm 4. Sraigtas: sustiprinta sraigto jungtis su pleišto formos jungties geometrija 5. Valdymas: SELOGICA 'direct' valdymas 6. Technologijos lygis: 2 lygio servovarikliu valdomas su 2 reguliuojamomis siurbliais 7. Besisukantis stalas: specialios ergonomiškos konstrukcijos, dviejų pakopų, 180° pirmyn/atgal kintamasis 8. Purkštukai: atvira 45 mm purkštukas su purkštuko antgaliu 9. Formoje montuojami adatiniai purkštukai: elektra valdomi &

Sąlyga: naujas, Table diameter: 900 mm Table load capacity: 1.0 t Swivel range: 135 degrees Rotational speed: 0.12 - 1.2 rpm Faceplate height: 820 mm Welding current: 500 amperes Total power requirement: 0.75 + 0.55 kW Machine weight: approx. 1.1 t Space requirement: approx. 1.5 x 1.0 x 0.9 m - Self-locking gearbox: no overrun or backlash under eccentric load. - Electronic components by Schneider, Siemens, and Delta. - Infinitely variable, frequency-controlled turntable speed. - High stability due to robust construction. - Welding current transmission. Nodpfx Agsfv Axxjijku - CE certificate. - Excellent price/performance ratio. - The D-HBE series is supplied as standard with cable remote control and foot switch.

Sąlyga: naujas, Table diameter: 2500 mm Table load capacity: 20.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.04 - 0.4 rpm Torque at face plate: 40,000 Nm Through-hole in table: 200 mm Welding current: 1,000 amperes Total power requirement: 5.5 + 11.0 kW Machine weight: approx. t TILTING-ROTARY TABLE WITH LARGE THROUGH-BORE • Self-locking gearbox; no forward or backward movement under eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled for very precise speed regulation. • Turntable with large through-bore and T-slots. • High stability due to smart design. • CE certificate. • Excellent price/performance ratio. • The D-TLP series is supplied with remote control and foot pedal (left/right). No original images. However, construction type is identical. Nedpfofv Axmex Agijku