Smulkintas malūnas

Rapid Schneidmühle

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11481, Rotor diameter: 300 mm Rotor width: 600 mm Fsdpfx Aoghgmzob Soft 3-knife rotor 4 rows of stator knives Infeed cross-section approx. 250 x 600 mm Drive motor 37 kW

Sąlyga: naujas, mašinos/transporto priemonės numeris: Baureihe GSE / Neumaschine, Economic granulators: Ffsdpfx Asghgbtob Sot This GSE series is ideal for all injection molding and blow molding operations. It is generally suitable for all thin-walled plastic waste. These granulators are characterized not only by their attractive purchase price, but also by their robust, split steel/welded housing, ease of cleaning, and simple knife and screen changes. Thanks to the tangential housing geometry in combination with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted by the rotor and shredded. Regrind transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a regrind collection bin is available, which, like the extraction tray, is made from stainless material.

Gamybos metai: 2024, Sąlyga: naujas, LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many more! Ffodjga Nfcjpfx Ab Sjt

Sąlyga: naujas, Continuous drilling capacity in St 60: 15 mm Nominal drilling capacity: 18 mm Thread cutting capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 – 4,000 rpm Spindle speeds for thread cutting: 200 – 700 rpm Distance spindle/table: up to 380 mm Ffodpfx Ajb Eldnjb Sot Table surface: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipped with a full-featured thread cutting device and programmable digital display Machine in stock and immediately available

Gamybos metai: 2025, Sąlyga: naujas, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic waste, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Fedeg Ay Dhspfx Ab Seft

Sąlyga: naujas, High-performance thread cutting machine with leadscrew and optimal safety device to prevent tool breakage. Program mode for single or continuous cycle operation. Electronically controlled motor braking in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M 4 - M20 Fsdpfx Ajgv I Unob Seft Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle/table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, reverse gear disengagement, externally ventilated motor, die holder, flange quill, foot impulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 6726 TECHNINIAI DUOMENYS - Pakrovimo bunkerio įvadas: 280x300 mm - Susmulkintos medienos išvadas: Ø 310 mm - Rotoriaus darbinis plotis: 340 mm - Pagrindinis variklis: 22 kW - Peilių kiekis: 6 vnt. - Matmenys (I/P/A): 1300x1150x1680 mm Fedsignt Ujpfx Ab Soft - Svoris: 720 kg PRIVALUMAI – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 19 900 PLN Grynoji kaina: 4 740 EUR Kaina apskaičiuota pagal 4,2 PLN/EUR kursą (esant didesniems kursų svyravimams kaina gali keistis)

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Operating voltage: 380 V Ffsdpfx Abog Ip Efe Sot Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Sąlyga: labai geros būklės (naudotas), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external saving of data and images. This enables quick and easy acquisition of information about the composition and morphology of specimen surfaces down to the sub-micrometer scale. With a magnification range from 5x to 300,000x, both macrostructure and microstructure investigations are possible. The application range can be significantly expanded by using special add-ons, allowing for analytical examinations of microareas on the surface, for example. Operation of the device can be conducted either via conventional control elements or via keyboard and mouse (optional). Electron optics and vacuum control are operated conventionally. Image memory functions are operated using the keyboard or mouse (optional). Centrally located on the control panel is a separate info screen for menu display. This user manual serves as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide even less-experienced users with the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a 1-2-3-5-10 sequence Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm – guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted specimen 25 nm – guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted specimen 3.5 nm – guaranteed with optimum LaB6 cathode at 30 kV, 6 mm working distance, un-tilted specimen Scope of delivery: (DSM 962 with accessories as pictured) Fjdpefcwwnofx Ab Soft Condition: used (Specifications and data may be subject to change and errors reserved!) Please ask about shipping options before purchase. We are also happy to answer further questions by phone.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: PE, PP, or three-layer pipe production, or for pipe sheathing and application of stripes The line has been used for producing heating pipes Fodpfjhy Tp Djx Ab Ssft Condition: Very good 2 units of WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany