Vertikalus džiovintuvas FV 2 /3500-46 UVR2M

Cefla 130000€ FV 2 / 3500-46 SERTARE UVR2M

Sąlyga: labai geros būklės (naudotas), Coating and packaging line with thermoregulated shrink film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized conveyor) approx. 7600 mm - Reel holder (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross sealing machine (2500 mm) - Max. usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) using sealing bar c) Heat shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is tunnel) with hot air circulation (heated by electric resistors and fan), total installed power kW ? Psdogp Diaepfx Af Negg - Conveyor with metal rods (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from approx. 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Gamybos metai: 2023, Sąlyga: naujas, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Application: Packaging, bundling, and protecting long or bulky products such as furniture, doors, wooden panels, etc. Operator Side: - Right side in the direction of product flow General Technical Data: - Main motor power: 1.5 kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Pgedefuwg Ijpfx Af Neg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear holders that press from above during cutting to secure the product - Photo sensor for automatic start of wrapping process - Touch-screen for adjusting machine parameters to product requirements - Operator safety systems Optional Equipment: - Various conveyor configurations - Infeed and outfeed roller conveyors - Air bubble film wrapping unit Technical Specifications: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Conveyor Belt Features: - Usable length: 1924 mm - Total length: 2000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m / sec - Load capacity: 100 kg/m Stretch Film Specifications: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Sąlyga: geras (naudotas), Drying oven for UV line Pjdpfx Afst Ag Uqe Negg

Sąlyga: naudotas, Gamybos metai: 2019, bendras aukštis: 2 450 mm, bendras ilgis: 9 500 mm, bendras plotis: 2 400 mm, Unladen weight: 5,000 kg Price: On request Pgedownibtspfx Af Nsg CNC Machining Center SCM Morbidelli M100 Brand: SCM Type: Morbidelli M100 Year of manufacture: 2019 Serial number: AA100001570 Worktable dimensions: 5510 x 1620 mm (LxW) 400 Volt / 50 Hz PRO-Speed Safety System TEPCAD control panel with touchscreen color display Linear tool changer TBR14 (Y=1620 positions) Linear tool changer FAST14 Air blower at the electrospindle Protective fencing for X-Y axes Vacuum pump 150/300 m³/h 50/50 Hz 5-axis head, 'JQX' version, 13.5 kW Fixed base 145x145 H=75 mm Swiveling gondola 145x55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect: 1 year (includes gateway kit "plug & play") SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for the human-machine interface (HMI) Maestro software for CNC programming Hardware dongle for Maestro CNC Advanced Maestro 3D module Additional dongle for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC "eye-M PRO" Axis movements Maximum vectorial rapid traverse speed (X-Y axis): 56 m/min Z-axis travel: 180 mm Milling unit Motor power: 5.5 kW Speed: 4000 rpm Tool changer with up to 44 positions Air consumption: 4430 m³/h Air velocity: 25 m/sec Connection diameter: 250 mm Overall dimensions: 9700 x 5020 x 2650 mm (LxWxH) - Year of manufacture: 2019 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AA10001570 - Transport dimensions: 9500 mm x 2400 mm x 2450 mm (L x W x H) - Transport weight [kg]: 5000 kg Financial Information VAT: The price is exclusive of VAT VAT/Margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Glenn Smeets

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse Pjdpfxjt R T Hco Af Negg 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. Pgsdpfx Asxnldbjf Nsg CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: labai geros būklės (naudotas), Apatinės ašies frezavimo staklės Panhans 240A Veleno skersmuo: 30 mm Veleno ilgis: 130 mm Kintamas veleno greitis: 3000/4500/6000/9000 aps./min Elektroninis veleno aukščio reguliavimas Pgodpfoxg Iz Hjx Af Nog Elektroninis liniuotės reguliavimas Elektroninis kampo reguliavimas SCM keturių volelių padavimo įtaisas

Gamybos metai: 2023, Sąlyga: naujas, Fully automatic orbital stretch wrapper SPINNER 1500s Application: Packaging, grouping, and protection of long or bulky items such as furniture, doors, wood panels, etc. Operator side: - right in the direction of product flow General technical data: - Main motor power: 2.2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,200 kg Standard equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with a mechanical brake system - Automatic stretch, clamping, and cutting system - Pneumatically operated top pressure units at front and rear, which press down on the product during the cutting process to hold it in place - Photoelectric sensor for automatic start of the wrapping cycle - Touchscreen panel for adjusting machine parameters to specific product requirements - Pre-programmed selection for recurrent product dimensions - Operator safety systems - Infeed and outfeed rollers Technical features: Wrapping dimensions according to diagram: - Max. length: unlimited - Min. dimensions (WxHxL): 100 x 18 x 550 mm Conveyor belt features: - Usable length: 1,924 mm - Total length: 2,000 mm Pgedefuwmuopfx Af Nog - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Loading capacity: 150 kg/m Stretch film properties: - Max. film width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns

Sąlyga: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. Pjdpfx Asxqggcjf Nsgg (Enquiries will only be answered if you provide your address and telephone number!)

Sąlyga: naudotas, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residues from wood, paper, plastics, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compaction, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Capacity: 50 kg/h (material-dependent) Throughput: 0.45 m³/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid potential misunderstandings, on-site inspections are possible and recommended by prior appointment Pgodpfewqhwlex Af Njg Sale as is Technical specifications, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided on used machines; the goods are sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location