Dulkių ištraukimo ventiliatorius 37 kW

CAT Blower IF

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, mašinos/transporto priemonės numeris: fortlaufend, Centre height: 200 mm Centre distance: 1000 mm Swing diameter over bed: 400 mm Swing diameter over cross-slide: 220 mm Spindle bore: 52 mm Speed range: 9–1600 rpm Spindle nose: Bayonet DIN 5027 KK6 Longitudinal feed range: 0.028 – 6.43 mm/rev (93 steps) Cross feed range: 0.012 – 2.73 mm/rev (93 steps) Metric threads: 0.5 – 224 mm (48 steps) Inch threads: 72 – 1/8 TPI (46 steps) Module threads: 0.5 – 112 (42 steps) Diametral threads: 56 – 1/4 DP Tailstock quill diameter: 75 mm Tailstock quill stroke: 150 mm Tailstock taper: Morse Taper 5 Motor power: 7.5 kW Weight: 2100 kg Nodj Nh Hxepfx Abasdd Dimensions: 2672 x 975 x 1230 mm Equipment: 3-axis digital readout (brand SINO), 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed and travelling steady, coolant system, splash guard, rapid traverse, manual central lubrication, 4-way tool post, machine lamp.

Sąlyga: visiškai atnaujintas (naudotas), Pressione: 150 t Corsa: 140 mm Dimensioni tavola: 510 x 530 mm Ndsdegd H Tpopfx Abaed

Sąlyga: naujas, Gamybos metai: 2025, Center height: 250 mm Spindle bore: 82 mm Distance between centers: 2000 mm Swing over bed: 500 mm Swing over gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Nsdpod I A Auefx Abaedd Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3,132 x 975 x 1,270 mm

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Nsdpfx Aeph Uk Njbaodd Press Type: Double-Column Press Thermal Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: - Determined at maximum closing force with 70% utilization:

Sąlyga: naudotas, Gebrauchte vertikale Edelstahltanks, Kapazität 40.000 L Njdpei E Abijfx Abaodd Außenmaße: Durchmesser Ø 3200/3400 mm, Gesamthöhe 9600 mm inkl. Antrieb. Zylinderhöhe: 7200 mm. Drei vertikale Edelstahltanks. Isolierung mit 100 mm Steinwolle, abgeschlossen mit Flachabdeckung. Kegelförmiger Boden, 35 Grad, mit 4" Auslauf. Klöffer-Deckel mit Mannloch. Leistungsstarker oben montierter Rührwerksantrieb. Rührwerk mit 37 kW. Werkstoff: AISI 316.

Sąlyga: naujas, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool mounting, shaft: 80 mm Tool size: 245 mm Working speed: 4.5 m/min Motor: 4 kW Hydraulics: 30 tons Dimensions (LxWxH): 1450 x 1050 x 1800 mm Weight: 1400 kg Nsdpfx Abeh T Ulnsaedd 3 driven rollers Hardened standard rollers Hardened and ground tool mounting, shaft Mobile control panel Horizontal and vertical working positions Digital display Compliant with CE standards

Sąlyga: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: HB 2022-A-073, Portal-type straightening press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Daylight opening 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots as per customer request, otherwise 22 mm i) Operation via swiveling arm, mounted on the bridge j) Pressure adjustable from 50 T to 300 T via monitor k) Bridge travels using two gear motors with rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine frame double-coated n) Cylinder induction-hardened Design Type of press: Portal press Thermally neutral 80 – 120 °C Number of operator sides: 3 Forces Max. press force: 3,000 kN Max. free stripping force: 500 kN Pressurization time (closed tool, steel-on-steel): max. 3 sec Dimensions Max. opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at max. closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press without operating fluids and table plate: approx. 22 T Speeds Fast closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Noise Level Sound pressure level, measured at 1.5 m height at the operator panel: max. 78 dB(A) (DIN 45635-T16-KL3) Hydraulics Number of press cylinders: 1 Max. operating pressure: 350 bar Pressurization time: approx. 2–3 sec Pressing accuracy during stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: ca. HLPD 46 MW, 900 liters Ambient temperature max.: 45 °C Oil temperature max.: 55 °C Nodpfx Ash Agnuebasdd Electrics Main power supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic main motor connection: IE3, 22 kW Total connected load: approx. 30 kW

Sąlyga: naujas, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel (diameter x width): 200 / 155 mm Flat grinding table: 460 x 150 mm Extraction port (diameter): 100 mm Motor output power S1 100%: 2.1 / 2.8 kW Motor input power S6 40%: 2.8 / 3.6 kW Nsdpfx Abjd Rw Rheajdd Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg

Sąlyga: naujas, Gamybos metai: 2025, Main features, functions, and advantages of the welding positioner include: Functions: 1. Rotation direction switch-off: Enables control of the direction of the turntable's rotation. 2. Rotation direction selector switch: Allows changing the turntable's rotation direction. 3. Stepless adjustment of turntable rotation speed: This function allows you to set the rotation speed to match specific operational requirements. 4. Compact, robust design: The solid construction ensures the device's durability and resilience. 5. Foot pedal control: Facilitates precise operation of the positioner. 6. Thermal fuse: Provides additional operational safety. 7. Brushed motor: The brushed DC motor is suitable for a wide range of applications. 8. Tilt range of the turntable 0 - 90°: The turntable can be tilted from 0 to 90 degrees, which is essential for welding in various positions. 9. Mounting option for centering chuck: Allows for additional alignment of components. Advantages: 1. Increased work efficiency: The positioner enhances productivity in assembly and welding processes. 2. Reduced production costs: Automating or simplifying the rotation process helps lower production expenses. 3. Repeatability of welds: The device ensures consistent quality and accuracy for welds. 4. Operational flexibility: Adjustable speed and rotation direction make the positioner adaptable to diverse tasks. 5. Improved welder working conditions: Enables the welder to work more comfortably and adopt ergonomic positions during welding. Set includes: 1. PS-500 positioner unit. 2. Foot pedal control. 3. Power cable. 4. User manual. 5. Welding torch holder mast. The CORMAK PS-500 positioner is a valuable tool for industries requiring the rotation and positioning of workpieces, especially during welding processes. It helps increase workflow efficiency, reduce production costs, and improve overall work quality. Technical specifications: - Maximum load: 300 kg - Table diameter: φ500 mm - Tilt angle: 0° ~ +90° - Rotation speed: 0.2 ~ 2.5 rpm - Drive power: 200 W - Tilt adjustment: manual Njderigmgspfx Abaodd - Voltage: 220V-1PH-50HZ - Torch support: included - Dimensions: 700 x 650 x 710 mm - Weight: 97 kg *3-jaw chuck is not included in the set

Sąlyga: naujas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0116 - Rev.00, Press force: 110 t Passage width: 1300 mm Stroke: 1500 mm Machine weight approx. (without operating fluids): 12 t Dimensions (L x W x H): approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other component colour: RAL 7021 Cladding and balcony colour: RAL 1021 Motor power: 18 kW Max. rapid advance speed: 300 mm/sec Pressing phase speed: 15 mm/sec Oil tank: 150 l Nedpfxjdxvflj Abajdd Control system Siemens: S7 1200